that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

it is an email server/setting issue most likely

your email server probably requires outgoing authentication or something like that and that is why internal emails can be sent to but nothing else

its something along those lines

this will help you see the real error instead of the generic 500
http://support.cjwsoft.com/code/moreinfo11-1.htm

Hello,

My guess your having trouble setting up a system dsn because the database has a password set on it. Your hosting company most likely sets up DSNs without using the advanced tab which is where the authentication information goes. Or they have some sort of web interface for the customers to use that doesn’t allow setting up that information.System DSN’s are actually difficult to set up correctly when the database has a password on it. There is of course a password on the database for security reasons so if someone ever downloads it somehow they will not get your information.

System DSN’s are not the way to go regardless as you will see mentioned at our support site.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=9&P N=1

You really should try setting up a DSN-less connection. It is the best way to go. They are easier to set up, perform better, and are less load on the server. Any host that wants it customers to use system dsn’s is not on the ball as far as server performance and server resource conservation goes. They are really asking for trouble down the road.

All you need to do to make dsn-less connection is the following.

Get permissions set for the folder the database is in (by your host)… then figure out the physical path on the server to the database by using server.mappath or you simply ask your host for the info.

An article I wrote on using server.mappath

http://www.powerasp.com/content/hintstips/physical-path.asp

Then your connection string will look something like this.. (of course you edit the path to match what server.mappath tells you. And you make sure the database name is correct)

ListingsConnectionString = "DBQ=C:\Inetpub\wwwroot\asplistings\_database\asplistings_ac cess2000.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Another option would be to simply remove the password from the database using MSACCESS.. then try to connect to it using a System DSN without the password. If your host is storing the databases outside of your web in the root of the server then removing the password on the database is not that bad of a thing to do as there is no way anyone will be able to dload it from your site. Of course there is a still a performace loss when using a system dsn with an Access Database

Not really sure how to do this.... i think you know what i am looking to do.. is there anyway you can show me or create that solution for me? It would prob. take you minutes as its been taking me hours

yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.

it might help me to figure this problem out.

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

>>I should also mention that the paypals scenarios used in ASPProtect can not be tested using PayPal's sandbox.

>>Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts) then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Yeah, been messing around with that.  Got everything going except the return page which I can't do until the site is live. 

>>Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect.

Ok.  Will email you with a username and password for access to the site once it's live. 

Sounds like a great add-on for ASPProtect!

Hi Chris:

Is there a way I can include the username and password in the URL of a protected page to gain access to a that page without going through the log-in page?

I'm not quite sure what the syntax would be in the URL.

Warren

I would highly suggest setting up a DSN-LESS connection.

That system dsn is most likely the source of your trouble It is probably that or permissions are still not correct.

I can't tell you how many people have had trouble with system dsn's and finally set up a dsn-less connection and everything then worked as it should.

The location of your database is fine as long as permissions are truly set correctly like I mentioned.

Also, be sure you are setting the database type correctly in the dataconn_inc.asp file. That can cause problems as well as some people have been known to delete that line.

See my articles...

http://support.cjwsoft.com/code/moreinfo9-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/code_info.asp?TID=40&KW= system+dsn

ASPProtect v7 comes with working example code of protecting an image from being downloaded and also protects the true file location of the image on your server..

This comes with the system as an example folder with some files in it.

Basically we protect the image in 2 ways.

All in all this is should be very effective protection. Yes, there are still ways to get the images like doing screen captures, but this will ensure that people viewing images are logged in to your site. This will in most cases keep them from right clicking and saving the images. This will ensure that people can not tell other people the image's url location and it will ensure other sites can not leach your images and bandwidth.

For the image protection examples to work you may need to edit some values
in the stream_pic.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "image file name" from the call_pic.asp file which is an example of how you protect a page with javascript and call a streamed image using an image tag.

Lasty, here is a great article I found on image protection and some of the things you can do about it and some of things you cannot.

http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID =41

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

Did you see this thread. It shows how to set up the project in Visual Studio in detail.

http://support.cjwsoft.com/code/moreinfo85-1.htm

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

This is amazing. You replied to question within minutes. Thanks for showing such a professionalism.

I have been using this solution for over a year now and think its great, however I recently logged on to add a banner and when I clciked on the link that opens a window, displaying all the gifs in the directory../images/banners/, now images showed up, however they do exist in that directory.

I recently upgraded my computer and am now using windows XP...could that be the problem?

Thanks

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

Really awesome, thanks..

If possible please be sure to respond to the email they send so the review ends up authenticated

When I designed the system I never really intended people to type in long descriptions for pictures

and if they did I assumed they would use the enter key once in while..

but I guess people dont do that

This thread is along the same lines and shows what someone else did about this..

http://support.cjwsoft.com/code/moreinfo99-1.htm

though they are talking about a different page its the same issue

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

New Version 8.1 Released

Whats new..
http://www.aspbanner.com/v8_notes.asp

Upgrade Instructions...

Upgrade at your own risk. Though we try new versions are not always perfect due to minor bugs we may miss.

Back up your old setup so you can revert back if necessary..!!!
Save your data connection string info in a text file so you have it.
You can get that by viewing the system info page in the admin area.

Carefully copy all the ".asp" files from the new version to the old.
Your going to want all the .asp files in the aspbanner folder.
Your going to want all the .asp files in the aspbanner/scripts folder

Copy the aspbanner/images folder because there are some new images

Be sure to also copy the "data/config" folder files.folders as well as a lot of that is new including the actual config file. If you dont get the new config file copied in there you will have problems later on with some of the new features.

Be sure to create a new folder in the "data" folder called "tempstats"
Make sure it has proper permissions if you plan on using the delayed stats feature as the stats gets temporarily stored there. 

Go back to the area where you originally setup the data connection and do that again...

From the web browser run the following URL

http://yoursite/data/config/aspbanner_unlimited.asp

Replace "yoursite" with the proper url info relevant to your web site location.

When run via the web server that page will ask for a password. By default it is "temp". You should change it later on for security reasons. That page tells you how.

Now... moving on..

There were no changes to the database except for SQL Server users so you can use your existing database.

SQL Server users that want to use the new stored procedures feature (it's optional) will need to update their SQL database with the stored procedures.

Scripts to do that are provided.


ALSO: I have been running this new version using SQL Server Stored Procedure mode for a 1 week on a special banner server that serves banners to many of my own sites. I have also been using the new Delayed Stats feature.

All I can say is it is running like a champ and the SQL server is using less memory than it ever did before.

Hi -

We are trying to set up ASPProtect 7 so that the user is redirected to a specific web page based on their group membership.

For example, immediately upon successful login:

Group 1 members are directed to page A
Group 2 members are directed to page B
Group 3 members are directed to page C

Users will only ever belong to one group.

We tried to use the Redirect_URL feature but it causes the browser to loop.

Could you let us know exactly how to do this.  We are not ASP programmers and need to work from an example.

Thanks!

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

Have SQL 2000 backend...
We just moved from Windows 2000 to Windows 2003, used import data routine in SQL to move data.

Logged into admin area. When adding new user, no record is created. However, editing record works just fine.

Any ideas would be appreciated.