Editing the look of the login page.

In this version editing the look of the login page is very easy.
You can make this login page look exactly like you web site if you like.

You want to edit the "scripts/login_form_inc.asp" file.

It can be edited with any editor as long as the existing bits of server side code in it and the login form remain in tact.

The best thing to do is back it up before you start editing it.
Then if you goof it up you can revert back to the original.

If you edit this page with FrontPage enable the "show all" feature.
Its the little PIE sign in your icons. It will show the server side code as yellow things on the screen so you know where they are and can be careful not to delete them.

see screenshot

The main users screen... the 1st screen you see when you go to the admin area..  where you email an individual user..

The settings I am referring to being the various emailing settings on the settings screen, The settings you showed me.

As for emailing via a remote server over dsl. It may not be working because the ISP's block the port (25) to stop people from running email servers over their dsl.

Your POP3 works because POP3 uses port 110.

If you want to send emails from your local server on your dsl you should probably install the SMTP service of IIS if you have not and send emails using that with CDOSYS. Either that or get a commerical DSL account with a static IP that allows for running email servers.

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

That would not happen unless you added a target to the login form or you're code had a base target set.

Like so..

<base target="_blank">

I would really need more detailed information. It's nothing the system does the way it ships under normal circumstances. For example you shouldn't see that behavior in any of the example protected ".asp" pages

that is unless you have something odd going on with your browser settings or you made changes to the login form or code around it causing it. (or you are using frames and dont have some of the targets and what not set correctly)

My guess is that it has to be something you added or did, but I really need to know more to offer more than that.

The protection code for my group3 is:

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * GP03 * ) -->
<% GROUPACCESS = "3" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

btw - sorry but I am using v7
and thanks for the assistance

--------------------------------------------
(( TRY THIS AT YOUR OWN RISK !!))
--------------------------------------------

2004-08-19_122127_ASPBanner_V7.3_code_banner_encode_decode_m od.zip

This is an Expirmental MOD for ASPBanner Version 7.3 Only
Do not use it on other versions....

It encodes CODE Banner information before saving it into the application variables that handle banner rotation. It then decodes that information before displaying them on your web pages.

The reason for this is SOME very complex javascript does not always save correctly into the application variables that rotate banners (even when not using the JavaScript Method to display the banners)

This way the javascript or whatever you entered comes out on your web page exactly as you entered it and runs correctly.. but there is little more processing going on to handle the encoding and decoding. But its probably nothing to worry about and won't effect performance at all.

Unless your having a problem don't use this mod. It is not officially supported in any way.

-- DIRECTIONS --

( COPY THESE FILES INTO YOUR ASPBANNER DIRECTORY AND BACK UP ALL THE FILES THAT YOU WILL BE REPLACING ))
(( SO YOU CAN REVERT BACK IF THERE IS TROUBLE ))

If you are wondering if the "appinfo_inc.asp" included has the weight banner bug fix applied to it already. That is a bug mentioned in our forums

ALSO:

(( YOU CAN NOT USE THE INCLUDE METHODS OF CALLING BANNERS WITH THIS CODE ))

(( YOU CAN NOT USE THE JAVASCRIPT METHOD OF CALLING BANNERS WITH THIS CODE ))

(( USE ONE OF THE OTHER METHODS ))

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

I just moved servers and now my "code" ads are giving me errors...

"google_ad_width" is undefined.

I have tried adding the width and height... taking it out.. all the basic stuff.

Any ideas?

TIA  

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.

Here are three known bugs and their fixes...

If you have any of these symptoms these fixes will most likely take care of them.
If you don't have a symptom do not make any changes as you most likely have an updated copy of the application.

Technically if you bought that app on or after April 27th 2004 these bugs should all have been corrected.

Description Fix

(no descriptions showing in pop up window)

Edit pic_window.asp with a text editor

Change

Set f=fs.OpenTextFile(Server.MapPath("pictures/Album_ID_" & Album_ID & ".txt"), 1)

To

Set f=fs.OpenTextFile(Server.MapPath("../pictures/Album_ID_" & Album_ID & ".txt"), 1)

Slideshow Fix…

(last image in slideshow it not showing)

In slideshow.asp

Change

<% For PicArrayIndex = 0 To Ubound(PicArray) - 1 %>

To

<% For PicArrayIndex = 0 To Ubound(PicArray) %>

Add To Favorites fix

(add to favorites feature doesn’t work at all)

Edit "album_uppermenu_inc.asp" in the scripts folder

Change

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

To

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>&Action=Add_To_Favorites"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

Really, only you or your hosting company would know that information...

It is usally installed in the "_database" folder but the physical path including the drive letter  to that can only be known by asking your hosting company or by using server mappath to learn the path on you own.
http://www.powerasp.com/content/hintstips/physical-path.asp

That folder also needs special permissions. The permissions it needs are covered in the documentation for the software and generally only your hosting compnay can set those permissions.

The online support forums here are full of information and resources on correctly setting up data connections. It is ASP 101 and something you really need to have an understanding of.

I am happy to answer questions and try to help, but if you dont want to deal with it or can't we do offer installation services.

http://www.cjwsoft.com/installation_service.asp

We have a site that currently runs ASPProtect and would like to install a second instance of it.  The reason is that the current one is set up to manually authorize new users (it is for applying discounts to the Trade), but we want a second instance that will allow new users to register freely (this is for personalization). 

Has anyone set up such a goofy scenario themselves?  Is this even possible?

Thank you!

These are 4 valid examples of calling a flash movie.

The more simple examples may cause problems for people that don't have the flash plugin installed. I really do not know as I am no flash expert. All these work fine for me. Of course I have the latest flash plugin installed. Perhaps some of you can shed some light in this. The 3rd and 4rth examples are obviously only slightly different and mention different versions of flash as far as downloading the plugin goes.

<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" WIDTH="468" HEIGHT="60">

<object width="120" height="22">
<param name="movie" value=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" width="468" height="60">
</embed>
</object>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://download.macromedia.com/pub/shockwave/cabs/flash/swfl ash.cab#version=6,0,40,0"WIDTH="468 " HEIGHT="60" id="myMovieName">
<PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
<PARAM NAME=quality VALUE=high>
<PARAM NAME=bgcolor VALUE=#FFFFFF>
<EMBED src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality=high bgcolor=#FFFFFF WIDTH="468" HEIGHT="60" NAME="mybannername" ALIGN="" TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/go/getflashplayer">
</EMBED>
</OBJECT>

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#FFFFFF>
 <embed src=" http://www.aspbanner.com/test/aspbanner/images/banners/power asp.swf" quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

Chris.

After I had you install ASPProtect I added the ASP protecting code to the top of my home page:

<%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "1" %>
<!--#INCLUDE FILE="../../check_user_inc.asp"-->

Then I made my index.html page my login page buy using the script "Login form on a non protected page" on that I changed <form method="POST" action="memberarea.asp"> to <form method="POST" action="home.html">. 

When I try to log on to that page I get en error page HTTP Error 405 - The HTTP verb used to access this page is not allowed. Internet Information Services (IIS). I checked with my hosting company GoDaddy.com and they informed me that due to the fact that they do not have ASPProtect instaled on there systems they can not support it.  In recent conversations you told me that you have customers that do use godaddy and you products. 

Can you please tell me what I can do to get this working?

Thank you for your time and help.

Still not ready... I have no time to finsih it at the moment..

release date is unknown...

The file check_user_inc.asp as the lines: (which include Session("groups")

 Here we set some valus about the user into session variables
   Session("PasswordAccess") = "Yes"
   Session("Access_Level") = CmdCheckUser("Access_Level")
   Session("Admin") = CmdCheckUser("Admin")
   Session("Active") = CmdCheckUser("Active")
   Session("Expiration_Date") = Expiration_Date
   Session("User_ID") = CmdCheckUser("User_ID")
   Session("Groups") = CmdCheckUser("Groups")
   Session("Redirection_URL") = CmdCheckUser("Redirection_URL")
   Session("Password") = RC4(CmdCheckUser("Password"), PasswordEncryptionKey)
   Session("Username") = CmdCheckUser("Username")

ya, thats basically what I was gonna do..

BTW.. if that other app is going crazy with an access database it could be the cause of all the slowdown with ASPProtect... what happens there is it is using so much database driver time that it robs other things that also access a database... so basically ASPProtect isn't asking its database for much but your other application and database are cripping that part of the system and causing it to run like crapola

If your other app is using a system dsn try changing it to use a dsn-less connection... it might actually help

as far as sql goes if you follow the instructions with give for setting up a new database you shouldnt have any issues and permissions should be already set. because we handle that in the sql script we give you.. "its a good thing to look at and it is pretty easy to understand what is going on""

however using another account could cause permissions issues.."yes, even sa"     basically the username your using needs datareader and datawriter permissions to all tables used by the photo gallery system and you probably have to go specifically set them usin ght e security tab for your database in enterprise manager. This is more of SQL server 101 than anything to do with the Photo Gallery Code so I am not going to get into it too deeply, but that is definetly the issue.  Permissions...

Disallowed Parent Path

The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory. 

When you get an error like this it is because parent paths are disabled on the web server. This is a setting in the IIS console for your website.

If it is not enabled on you server you will have to ask your host to enable parent paths for your website.

This is what the settings screen looks like on an XP Machine

Additional Information:

It is enabled by default on IIS4-IIS5 but in IIS6 it is disabled by default.
It is a minor security risk to have enabled and some hosts can be difficult about setting it.

Truth is, if your hosting ASP for customers you need to enable this setting if the customer requests it. Especially since 90% of the ASP applications out there require the setting.

Hosting companies should if they are serious about hosting ASP.


If they won't your only option is to go through all the code and convert the file includes to virtual includes.

http://www.powerasp.com/content/code-snippets/includes.asp

The trouble with virtual includes is they are different depending on the layout of your website. (that's why web application developers generally don't use them)

Basically if you are in a sub domain the path for the virtual include is going to be different then if you were in the root.. etc etc

Also.. someone developing on a local machine would need totally different virtual includes on the development server than they would on the live server. Server Side includes are processed before ASP so there is no way to make them SMART, so to speak. Server Side includes are hardcoded and that's that.

In my opinion virtual includes are pretty useless for commercial web based applications...  Since you don't know where the customers plan to install the apps.
And YES there are some tricks when designing the applications that make it less of an issue but they are not perfect solutions.

For example...

The virtual include below would work if the application or code was installed in the root
<!--#include virtual = /somefile.asp"-->

But if the application or code was installed in a directory called "somedirectory" the virtual include directive would need to look like this

<!--#include virtual = "/somedirectory/somefile.asp"-->

Making progress. I have made the appropriate settings and now I have the option to upload.  When I upload, I get the following message:

 "Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

I am using IE6 XP SP2.  I also am using DUNDAS UPLOAD, ASPIMAGE.

I think I set permissions correctly bot not positive.  I have given all auth to everyone for the database etc.

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

I get this error, Any ideas?

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.

/guestbook/save.asp, line 109

Can you incorporate a secure log in within the scripting.  I would like the account information to be secure without having to have the whole site using running through a secure (https://) path.  If this is possible, the scripting is perfect!

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

UPDATE

Version 8.1 has code generators for these new methods built in...

the menu file.. "menu.asp" or something... just follow the logic of the code to find things like that. Look for server side include files and what not in the source code.

This is a good article on figuring out what pages to edit as well as other things.
http://www.powerasp.com/content/hintstips/common_sense.asp

If it was working and you changed code you could have possible messed up how all of that works... you may need to revert back and be really careful as you make changes testing every step of the way.