Making progress. I have made the appropriate settings and now I have the option to upload.  When I upload, I get the following message:

 "Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

I am using IE6 XP SP2.  I also am using DUNDAS UPLOAD, ASPIMAGE.

I think I set permissions correctly bot not positive.  I have given all auth to everyone for the database etc.

Hello,

Thank you for the feedback.

I would like to point out the requirements of the application however as this is something I am aware of and do address.

http://support.cjwsoft.com/code/moreinfo165-1.htm

These requirments are directly linked to from the ASPProtect v7 web page, so its not like I dont try to tell people the deal regarding SQL server.

Basically I only have the resources to provide scipts and instructions for using SQL Enterprise Manager and that is all I officially support. I also personally think anyone using a SQL Server should be using SQL Enterprise Manager because later on down the road there are things you may want to do such as backups/etc etc

Take Care,

Chris Williams
www.CJWSoft.com

  Much thanks, the duplicate incl's I spaced on and should have caught.  The hidden form variable was a key issue.  Thanks for the syntax and the help.  Now I get this page together. j  As a note - I got faster results by dropping my timeout to 3 minutes temporarily while progging and cleared browser cache between tests.  Thanks again.

I want to try this on the machine im using now; which is windows XP.

Is this possible? I don't think i can set folder permissions on XP... there is no option to do so...

Is there a way to do it?

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

I would check out this article for starters... aspprotect is very similar to asp photo gallery and so are a lot of the page names.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=49& PN=1

Jeromy, You should have access to that page.

Ok, if the link to the import/export screen does not show up its probably because you never put the import/export path in the admin settings?

go check that for me.

cause running that page without a path for the files could cause a timeout.. thats why the link doesn't show if the path is not entered (so people won't run it)

it looks sorta like this (there will be a field to fill in which wont show here)

Settings below specify the physical directory path of the export directory. This is used by the system when using the import/export feature. The export directory needs modify permissions for the anonymous webserver account.
ExportDirectory

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

I just did a quick google search... found a ton of info on how to find the setting. Here is one...

These are directions for IIS6 but the process is similar for IIS4-5

1. Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
2. Double-click your computer name in the left pane, and then double-click Web Sites.
3. Locate the Web site and directory that houses the ASP application.
4. Right-click the application site or directory, and then click Properties.
5. Select Home Directory, and then click Configuration.
6. Click Options, and then click to select the Enable Parent Paths check box.
7. Click OK two times.

you basically have to edit the html in the links in the various pages and remove them... some are in includes files

use a text editor and be causious / back things up before you remove links so you can revert back

Yup, it probably means the virtual directory is not configured as an Application in IIS.

You did put this in a plain folder in your web, correcct ?
Not a subweb

Regarding the application settings for the virtual directory.. if it is your server you set that stuff up in the IIS console.

If hosted somewhere it is there responsibility to have that set up correctly for you and you need to contact them and ask them what the deal is.

well, so far one other guy found one..

his, was some sort of weird character that was causing a line break or something though in my testing I just couldnt figure out what was going on

now for me to reproduce any error someone find with a password I need to know the key used and the password used

which make it real hard to troubleshoot

Nov 2005

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

Hello,

In that version is is not easy to change the values as they were not intended to be edited. You would have to dig through quite a lot of code as those values are hardcoded in quite a few pages. Probably at least 10 or more.

In the pro version there are variables you can change that very easily as that is intended to be easily changed in that version.

I am having severe trouble with the SQL database connection for ASPlisting (generic version).

I have used all of the suggested connection strings but still get error messages such as:

[DBNETLIB][ConnectionOpen (Connect()).]Specified SQL server not found.

I have set up the tables in the database, although the database existed already with many other tables in it as it costs me per database per month so one has to suffice with many tables in it.

I use SQL a fair amount on my site but have not suffered any probs like this yet.

Any advise or help would be useful.

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

The random password is generated during signup and the function that creates it is located on this page of code.

users/register.asp

it looks like this

Function RndStr(Length, UseChrs)
 If IsNull(UseChrs) OR (UseChrs = "") Then UseChrs = "0123456789abcdefghijklmnopqrstuvwxyz!@#$%^&*()_+=-"
 NewStr = ""
 Randomize(CByte(Left(Right(Time(),5),2)))
 For gpIndex = 1 To Length
  NewStr = NewStr & Mid(UseChrs, Int((Len(UseChrs)) * Rnd + 1), 1)
 Next
 RndStr = NewStr
End Function

For example go to this page and hit refresh and watch the password change.

http://www.aspprotect.com/demo2/users/register.asp

Yes, sometimes if you hit refresh quickly over and over you'll get the same password, but not generally. Also that is not something that would happen normally as a user isnt going to sit at that screen and hit refresh over and over.

Anyway... when signing up the new user of course has the option to change that password to something they would like better...

As far as... "selecting the same user name and password every time"

I need more information. That does not make sense for a lot of reasons.

Most importantly because usernames are not generated. The are inputed by the user during signup. They are then checked to ensure they do not already exist before the user is allowed to complete their signup.

So under normal circumstances there can never be duplicate usernames in the system or even users with duplicate emails as that is checked as well.

Now of course if you edited the code in any way it is possible all this is not working correctly ?

I've downloaded this neat little app, but I'm having troubles understanding what I should be using.  Cassinni or IIS, can you help?  I've tried to look at the help, but it is very vague on what to use in each situation. 

Any help is appreciated. 

Cheers

Parent paths being enabled on the server is a requirement of the application. That error means just what it says.

you can change all the server side includes to virtual includes that will work or you can ask you host to enable parent paths.. those are the options

more here...
http://support.cjwsoft.com/code/moreinfo5-1.htm

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

ok.. Chris.. I am now kicking myself in the butt.  In the setting section, I had to redirect certain urls and directories to the right spot.  I forgot that I renamed the root folder. 

Thank you, thus far for your continued help.  It is greatly appreciate.

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

Tony,

ASPBanner.NET was discontinued about 14 months ago. It is no longer supported in any way because quite frankly the classic ASP version is faster, more stable, has more features, and is a lot easier to install and get running.

If you PM me via the forum you are welcome to a copy of the current ASP Unlimited Version. It can serve banners to any type of page extension. All you have to do is ask for a copy.

Whether or not your existing ASPBanner.NET database is exactly the same structure I do not know, but I believe it is. You should compare the two if you plan to keep using the old database and make any neccessary changes so the old database has the exact same structure as the new version. If there are any differences they are very few.

Hi,

I only just purchased the product and I would be very keen to

a) is the upgrade available very soon as I don't want to spend the time developing one and than find the other released shortly & 

b) would I only need to pay the difference for the upgrade or have I already downloaded the upgrade already.

I cant see what version I current have.

I look forward to your response.