I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.

Basically the application variable system gets all messed up because it was not shut down properlly.

The ways to possibly cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..


Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.

Reboot the server.
Sometimes that is enough.

Stop the web in the IIS console.
Sometimes that is enough.

Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"

Remove and recreate new applications in IIS for the web in question.


And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.

Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.

You'll know things are ok again when you see your banners show up on your site.

UPDATE... on very very busy sites these methods have been reported to fail once in a while..  meaning .NET gets overloaded and instead of a banner its shows some error code.

its not the banner system .. its the .net engine and the calling method

1st off.. you appear to have some strange things going on with that domain. Looks like you have a frameset and are loading another domain in it which is always confuding especially if you are running the site off your home computer or something... I am not sure

That aside..

If I go to

http://www.bones.myftpsite.net/rfamilystuff/default.asp

and click on the "familiy" category

then right click on a broken image.. look at properties

Your linking the image to your localhost

see

http://localhost/rfamilystuff/pictures/Pic_3_1_thumb.jpg

and that is wrong, just like I said above

Nobody running the site off any computer but your development machine is going to see those pictures because the url isnt valid for them

My guess is in the settings you have the "PictureURL" set to

http://localhost/rfamilystuff/pictures

when it should be

http://www.bones.myftpsite.net/rfamilystuff/pictures


Good luck with this.. I am going to the bar.
If you need more help I probably will not be available until Monday.

Ok i was wanting to know what the "if then" statement would be if i wanted to show xxx if your group is xxx.

I tried

    <% If Session("Groups") = "1" then%>
    <font size="2">TEXT HERE</font>
    <%end if%>

But that did not seem to work.

That's exactly what it was.

The site owner couldn't see their own ads because Norton was blocking anything with the word ad in it.

On another note: I changed the word 'ad' to 'listing' and got it to show even with Norton.

so you are using the subscriptions signup directory right ?
"paypal_signup2" ?

1st.. I would check that the xml parser is working.

It is required for making the post back to paypal.
It is installed on windows 2000 and 2003 and XP by default.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=134& ; ; ; ; ; ;PN=1


Then I would check the actual form page to paypal to make sure it is generating a valid IPN url as a hidden form value.  It's the payment page you actually click on that actually takes you to paypal. For the subscription signup system that page is called "paypal1.asp"


You'll want to go through the process starting with the default.asp of the signup folder untill you get to that page. Then you want to look at the html source of that page in Internet Explorer. Your looking for something like this in the source code and you want to make sure it is valid.

<input type="hidden" name="notify_url" value=http://www.mysite.com/aspprotect/paypal_sub_signup/ipn.asp>

It also has to a url on the internet that paypals server can see. It can not be a local url for your machine. Also: If it is not valid we can try hard coding it.


If all of these things are good I'll have to take a look. I have some text file logging I can do when paypal hits your IPN url that can tell us if it is actually hitting that page like it is supposed to. And I can test the system for you by making some 1 cent payments using my own paypal account until we find out what is going wrong.

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

no, that system only works with ASP.NET code.

Currently it can not possibly work with classic asp.
PayPal made it a nightmare to use and work with.

Special things regarding the signing of digital certificates also need to be installed on the web server so if it isn't your server your also out of luck.

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

I'll try to help when I get back tues night,, see the contact page for info on where I am .
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

That’s about all I can tell you. It's just not something I support.

It does not matter what directory name the ASPProtect files and folders are in but you cant go moving around critical file and folders like it appears you did nor is there any reason to.

All that is is saying is that the users folder, the password_admin folder, the scripts folder, the check_user_inc.asp file, and all the other files and folders that come with the system can be in any directory name as a whole.... but that doesn't mean you can go messing around with the files and folders in that directory.

I assure you 100's of users do not use "aspprotect" as the main folder name and they have no issues doing so.

Regardless, you need to explain in much clearer detail exactly what you did and what paths you used and what is where.  At this point I really do not know what is you did as your post was not clear to me.

You should also check that you have entered correct path info in the admin settings page area. The register page is one of the paths that geths set there.

When adding a new user I am taken to a form.

There are several "required fields".

First and last names are 2 of them.

This is not needed by me and I need the company name as a required field instead. I work and deal with company names, not individuals.

So, i am unable to add any users due to this.

How can I either do away with the names as a required field or swap the individual names with the company name as a required field?

I have customers wanting to be able to view their own stats, but I need to do away with the required fields to work with my customer base.

-john

I checked through the code and could not find anything as well. 

However, I do think it may be related somehow to the code as I get the messages popping up in the error log only after I have edited a banner.

If there is nothing obvious, I may just set my error log to filter and automatically delete this type of error.  Not something I prefer to do.

Thanks for the quick response.

Otherwise the program is working very well and I'm happy with it.

The main root of your web site needs a "aspnet_client" folder for .NET apps like ASPProtect.NET to run.

If this isnt quite right one of two things can happen.

1.) You'll get a pop-up error like this.
'Unable to find script library WebUIValidation.js'

2.) The ASPProtect login screen will come up but just not let you log in.

This folder only goes in the root. Not in subfolders and subwebs.

If you dont have this folder in the root of your web.

Read this article to learn how to properly create the folder.
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/cpguide/html/cpconconfiguringaspnetapplicationforaspnet version.asp

If the app is installed on a hosted server you'll need to ask them to do that for you.

You can also try copying a the folder from your own machine after creating it the way the article above says.

or

here is a copy of my "aspnet_client" folder created under the latest framework at the time of this writing. v 1_1_4322

2004-11-03_134912_aspnet_client.zip

I am not sure if copying it in is as good as having created by the server as I haven't had time to really test all of that but it should work. Ultimately all this does is put some files .net needs in the web.

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

Hallo,

What do I have to do for inserting around 6,000 new users?

I have all my user in an access file. I don't know the password of access database files. The same problem with the "aspprotect upgrade pack".

Sorry for my English

in Control_pic.asp is there way to wrap the description field so that it doesn't go outside the table.

Thanks

Not to be pushy, but how's the new version progressing?

I'm hoping these features will be in it:

• possibly add the ability to move pictures around in an album. and maybe between albums, I must also remember to move the ratings and desc as well for that image.
• possibly add a feature to store 3 versions of images uploaded
  thumbnail, medium res, and high res/original

• add option to store the images orginal name in the images description area during upload
  may be helpful to people that name their images in a somewhat descriptive way

• add support for the ibulc bulk upload client that I recently discovered

If you could use a beta tester, I'm still just setting up my site and would be willing to run a beta.

Thanks

Al

The only other thing I can think of if you are not getting any errors.

Is that you may have the path to the server include file correct but ASP server side code is not executing in that part of your web site.

You can do a simple test to tell if it is...

Make a simple ".asp" page in the same folder.

Put only this code in it.

<% Response.Write ("ASP is executing") %>

then run the page via the web browser thru the server..

If the text prints out ASP is running... if you don't see anything it is not

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

Christopher,

I can empathize. It can be a real pain to stablize a server and fend off hack attacks.

As for beta testing, I was referring to once you get to the point where you're ready to release it to the public whether it's this month, next month, etc.

Good Luck!

Al

Now, we can connect to the MySQL database with ASPBanner using the following connection string if we like.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=root;pwd=temp;databas e=aspbanner;option=16386"

But we really do not want to connect to the aspbanner MySQL database using the "root" account

So, lets make an account to use..

In MySQL Administrator select "User Administration"

Down below you will see the user "root"

Right click on "root" and select "Add new user"



Type in a New MySQL Username and Password

I am going to call my new user "aspbanneruser"

Hit the Schema Privileges" tab



In this case since I am using the root account to manage my MySQL system I am just going to give this new user account what it needs to use the aspbanner database.. you may want to apply more permissions to the new account, that is up to you.. I am giving the new user (select, insert, update, delete, execute) So I right click on the aspbanner and then bring over the permissions I need for it.. and hit apply changes down in the bottom right.

We can now connect to the aspbanner MySQL database using this new account like so.

"driver={MySQL ODBC 3.51 Driver};server=localhost;port=3306;uid=aspbanneruser;pwd=tem p;databas e=aspbanner;option=16386"

------------------------------------------------------------ -----
article still in the process of being written (3/14/06)

Thanks.

clark

Thanks!  Will try both.

Appreciate the support.

How do I change the character length for the description field?

We do not support customization of the code or any custom coding you may end up doing with Visual Studio.NET. However, if you can show me that the application functions incorrectly in its default unmodified form I can help. If not it has to be something you did most likely.

Though I do not if it is the issue, mixing c# and vb.net in the same project can be tricky if not problematic. It’s definitely just not something I can support.

If you have not seen it we have tuturial on setting up the project in visual studio.net.
http://support.cjwsoft.com/code/moreinfo85-1.htm

I would suggest starting with a clean installation. Test everything to make sure the things you say are ok or not. (if not post here about it) Then try your hand at editing the application and compiling it. Keep the c# out of the mix at 1st.

I am not even sure if adding c# to the same project is feasable.
(maybe it is , maybe it isn't)

That being said.. ASPProtect.NET can of course be used to protect pages using c#. But compiling the ASPProtect.NET project with C# code added sounds a bit iffy to me. We wrote the application in VB.NET so you really need to use vb.net when making changes to it.

No problem. I get it now.

I added a Session Variable for "Counter". Then wrote an If statement around that. When the user logs on for the first time they see a window pop, after that the normal start page.

Thanks

Christopher,

Thank you again Sir. Your quick responses and helpful demeanor add greatly to the value of your software.