Of course ASP.NET is and HAS been installed. I have been running asp.net scripts for years on it. I am not new to asp.net nor setting up the server or anything. ASP.NET is properly installed and works perfectly.

You are missing the fact i mentioned it is a DOMAIN CONTROLLER.

I have come across MANY articles ONLINE via GOOGLE that mention if it is a domain controller, for some reason the aspnet account is not there or gets deleted.

IN ITS PLACE GOES THE IIS_WPG ACCOUNT. IS YOUR SOFTWARE NOT COMPATIBLE WITH THIS ACCOUNT?

Is it possible to run ASP.NET scripts without ASP.NET not being installed? Because I have been running asp.net pages without any problem.

I am trying to set up ASP protect 6 and have a problem that when a new user registers their email is not transferred to the database.

I can see the rest of their entries both in the database and in the admin/edit form but not the email.

Any ideas?

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

humm

expiration dates in the aspprotect system are not used at all when using paypal subscriptions.. all date handling is done on their end actually

and they of course send notices from their system to the user regarding their subscription and when it renews,cancels, etc etc

so I am pretty sure any errors with that would have more to do with the info you used for the subscription setup and possibly any paypal settings associated with it

its hard to say at this point

The smart thing to do I think.. would be to sign up someone using another PayPal account (your allowed 2)... and while doing it be very careful about the subscription setup data.. and then as soon as the subscription is created review all the info in the paypal system and see if the length of the subscription / expiration.. etc etc in the paypal system info looks right..

at least then you can begin to troubleshoot what is going on...

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

it is not uncommon for folder permissions to be lost or changed on a server.. a lot of things can cause it

if it was working and now you can not edit or write new data to the database it is most likely permissions

I would triple check permissions... see my articles if there is any doubt on how permissions are set

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

is that lindsey lohan and her fake boobs as ur avatar?

I am installing IIS and all of its glory on the other computer now... gotta love remote desktop (the pc is at work  )

I am having problems with a password a user wants to use.  He wants HANNAH.  When he (or I) try to log in with his username and password, I get a syntax error  -

Syntax error in string in query expression '(Username = 'changedforsecurity') AND (Password = ' éG'.
pathOnComputer../1protect/check_user_inc.asp, line 114

I've obviously changed the username and the server path in the info above for security. 

I have not messed with the encryption.   

What is it that the system doesn't like in the word HANNAH as a password?  I would just change his password for him but this guy has enough trouble just turning the computer on!  Confusing him with a new password would take weeks to set him straight. 

Thanks,
Mick

Hi,

Could you please advise what may be causing this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57a4 Thread 0x5474 DBC 0xf03a704 Jet'.

/ASPProtect/check_user_inc.asp, line 292

Funny thing is that if I refesh the page with the above error it gives me the following eror:

/ASPProtect/check_user_inc.asp, line 292

and after few times of refreshing the page it shows me the page I am after.

Is this my promlem or ISP's.

Thank you

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

--------------------------------------------
(( TRY THIS AT YOUR OWN RISK !!))
--------------------------------------------

2004-08-19_122127_ASPBanner_V7.3_code_banner_encode_decode_m od.zip

This is an Expirmental MOD for ASPBanner Version 7.3 Only
Do not use it on other versions....

It encodes CODE Banner information before saving it into the application variables that handle banner rotation. It then decodes that information before displaying them on your web pages.

The reason for this is SOME very complex javascript does not always save correctly into the application variables that rotate banners (even when not using the JavaScript Method to display the banners)

This way the javascript or whatever you entered comes out on your web page exactly as you entered it and runs correctly.. but there is little more processing going on to handle the encoding and decoding. But its probably nothing to worry about and won't effect performance at all.

Unless your having a problem don't use this mod. It is not officially supported in any way.

-- DIRECTIONS --

( COPY THESE FILES INTO YOUR ASPBANNER DIRECTORY AND BACK UP ALL THE FILES THAT YOU WILL BE REPLACING ))
(( SO YOU CAN REVERT BACK IF THERE IS TROUBLE ))

If you are wondering if the "appinfo_inc.asp" included has the weight banner bug fix applied to it already. That is a bug mentioned in our forums

ALSO:

(( YOU CAN NOT USE THE INCLUDE METHODS OF CALLING BANNERS WITH THIS CODE ))

(( YOU CAN NOT USE THE JAVASCRIPT METHOD OF CALLING BANNERS WITH THIS CODE ))

(( USE ONE OF THE OTHER METHODS ))

There are 8 Access Levels by default.. they work like this.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=166& ; ; ;PN=1

Access Levels exist in ASPProtect Version 7 for backward compatibilty for customers using previous versions.

Truth is Groups are the replacement for Access Levels and they are much more powerful and flexible. You can also make as many of them as you want in the admin area.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=167& ; ; ;PN=1

On a side note:
We also coded ASPProtect Version 7 so there could technically be as many access levels as you wanted. It's not supported but if you really wanted more Access Levels you would carefully add more Access Levels to the drop down choices when you edit a user. "edit.asp"

I don't know why anyone would want to use Access Levels however when they can use Groups.

enjoy the bar.. drink one for me.. cause that was the problem..

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

[/QUOTE]

Like I said no guarantee... I have a lot of things going on... it might not even be finished till the end of July... customers will always be able to get it for the difference in price

You have the version listed on the site when you purchassed it.
Version 3.0

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

Whein I went by the numbers off of your directions, which work well up to that point, the import would time out.

At that point I tried to import directly into access...and then it hung trying to login.

okay so I've put in a clean database and created a new record for me as admin.

There was nothing wrong with the server configuration. It turned out that the problem was that I disabled the email notification of new user registrations that I continually receive. That appears to disable the authorization email to new users as well.

One other issue. It appears that AOL email addressee's are not getting the authorization email. Does AOL have any blocks to CDONT generated emails?

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

I purchased the ASPGallery Pro last week and still cannot get it running. When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

Below is the connection string. My hosting company uses server map paths:

'Create database connection

'Create a connection odject
Set adoCon = Server.CreateObject("ADODB.Connection")

'Database connection info and driver
'strCon = "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("aspgallery_access2002.mdb")

'Alternative drivers faster than the generic access one above
'strCon = "Provider=Microsoft.Jet.OLEDB.3.51; Data Source=" & Server.MapPath("aspgallery_access97.mdb") 'This one is if you use Access 97
'strCon = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath("aspgallery_access2000.mdb") 'This one is for Access 2000/2002
GalleryConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Jet OLEDB:Database Password=temp; Data Source=\\NAWINFS04\home\users\web\b2623\rh.vickery2004\aspga llery\aspgallery_access2002.mdb; "
GalleryDatabaseType = "MSACCESS"

adoCon.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&Server.MapPath ("\aspgallery\aspgallery_access2002.mdb") & ";"

Definitely need some assistance!

Rhona (rookie asp) -

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

Ahhh....yes, I always forget about the cache.  That's exactly what it was. 

 I had made modifications to the import_pics.asp file, because I added more fields to the db, and made the import folder path dynamic, but I seem to have forgotten to add in the response.expires=0

Once I added this back in it has stopped messing up.

What was happening was, it wasn't overwriting the files, nor were they too big, but you would click on one thumbnail in an album(category) and it would display a picture from a totally different category.  It seems browser cache was the culprit, however.

Thanks for the quick reply, great product tooo!!!

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Hi

I downloaded the .chm format installation documentation but when I open it I get the index but can't see any of the pages so am a bit stuck.