Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

All of the fields with the expected paths show the correct file structure, so now I've put them in them in the boxes

right..

I had to open up the permissions to get it to work.  I now have to go back and uncheck each one for directory listing.. :)

I checked with our web hosting company and CDOSYS is installed and properly registered on the Windows 2003 Server our site resides on.

How do I go about changing the ASPProtect code to use CDOSYS?

Please advise.

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

Thanks, I'll take a look.

Nick

User Registration

The "users" folder allows users to sign themselves up and edit there accounts as well as retrieve lost passwords..

In the settings tab of the ASPProtect admin area there are options for which fields are used and which are mandatory when a user signs up. The only validation the system performs by default is checking for mandatory status. If you want to add more validation so reduce the chances of input errors that is up to you.

You can add additional server side validation by doing server side checks on the save pages... you can also make the field sizes larger in the database if you think you need to. You'll need to be good with ASP to do this.

Always backup your files before making changes to them so that you can revert back to a working copy if you mess something up.

I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

Ok nevermind that... i got by that wasn't paying attention...

The problem is even before this which i didn't know until now.

I placed the protect tag in a page i called members.aspx

When i go to this page is says ACCESS DENIED etc etc etc.

When i go to login to view this page i get the error..which i DIDNT know because i assumed it was working. This is the error im getting:

Server Error in '/MAP' Application.

---

The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.

Requested URL: /map/users/aspprotectlogin.aspx

btw it says /map because that is the subfolder within the root folder

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

Also.. if you want to customize each person's experience individually it really does not make sense to use groups or access levels for that purpose alone.

I mean, why bother making a group or access level for every user and worrying about keeping track of it all when you can just access the available session info about the user to create dynamic pages specific to that user.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=198& ; ; ; ;PN=1

That is why that information is there.


You can of course use some combination of the two technologies as well should you have groups of users that you want to have a slightly different experience.

Its not on their end. Using ASP alone you really won't be able to send more than around 300-400 individuals emails at a time before things will time out. Its just that ASP is not an efficient way of sending email and it never will be.

You really should look into worldcast like I mentioned before.
http://www.fairlogic.com/worldcast/

Then just export the email list from the database into worldcast and send out the newsletters.

You will get much better results and perfect newsletters and it really only takes a little bit longer to do each time once you figure it out. That is how I send out my PowerASP and CJWSoft newsletters and it works perfectly every time.

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

Is there an easy way to make this work with reoccurring a monthly or yearly subscription?

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

I just installed the software, but I can't find any place where I can see when users logged in, can someone please tell me where I can do this?

Thanks

Hi Chris,

The hosting company has been doing some work apparently regarding the database connection issue. Still something is funky

When I type in www.vickerylightning.com/aspgallery/default.asp I get the custom 404 error page and I noticed that it is trying to open the following:

http://www.vickerylightning.com/skins/default/settings.asp

Is that what it is supposed to do?

Thanks!
Rhona, the rookie

Hi,

I am just wondering if anyone else has had this problem. Even though the guestbook is empty, it takes just about 20 to 30 seconds for the guestbook/default.asp lto oad. Is this normal has anyone else has had this problem.

Thanks

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

I have been able to successfully edit some text colors, but there seems to be one page that wont change the text color. Inside the users/ folder, the login.asp page, i cant seem to change the text color from ffffff to 000000 so it can be read on my background color. Every page in the script is correct but this one.

Thanks.

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

humm, yea thats a data connection error..
really not related to the asp code in the application for the most part.

that is low level

If using MSACCESS

I would make sure permissions are set correctly on the database folder (not just the database file itself)

I would make sure your using at least a 2000 version of the database. 2003-2003 format being better.. 

I would make sure the server has up to date mdac/odbc drivers.. (that is really the server admins responsibility)


As for permissions there are articles in our forums about exactly how they need to be set. Improper permissions can cause a ton of random errors like that.

Humm, Did you change something in a bad way? Thats my guess.

I need more information on what is going on because by default it does not do that ?

The only possible way I can think of that could cause that is if you changed things around too much and the config_inc.asp file is getting run/included twice on that page your logging in to.

Also, when you sign in "where" ? What page ?

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...