Let me put it this way.

My home page (default.asp) is an unprotected page.

When a user that has signed in on another (protected pages) and has the remember me checkbox checked closes the browser cookies should be set for the next time they return.

When the user opens their browser and returns  to my home page (default.asp), I'd like to put a message saying:
Welcome back <%Session ("Username")%>

How is this done?

that really does not make any sense...

I dont know what else to tell you as this really shouldn't be anything too difficult to sort out...

redirection based on criteria is not something aspprotect does by default... I try to help a bit... I've shown everyone how to do it in this thread...I know plenty of people doing it... I've done it myself... I know it works

let me ask you this... are you using ASPProtect 6 with the Option Pack ?
I assume you must be or you would not have the Groups feature ?
And you asked this question in the ASPProtect 6 section.

but then maybe your using 7.. I do not know

this should all work the same either way

Okay, thanks, I'm going to change the method tonight and see if it makes a difference

I'll report back

Dave

ASPProtect and PayPal are fully automated and ready to go.
Accounts will automatically get activated after payment.

We actually do not tell you to put nothing in the PayPal system for the IPN URL. Something has to be there or PayPal will not let you enable IPN. We actually tell you in you PayPal settings to turn on IPN and make up an IPN url because something has to go there. (I think we suggested making a blank asp page on you're site to send it to) It really doesn't matter where you send that but it might as well be a valid page on your site to avoid any 404 errors in your logs when a non ASPProtect payment comes in.

You see, we dont set that IPN url set in the PayPal system because each ASPProtect signup script directory (single payment and subcription) uses it own IPN url and that all gets set on the fly by the aspprotect system. There is a way to overide the defaul IPN url is what I am saying.

Also:
A  lot of people already have something there and we didn't want the ASPProtect system to interfere with things they already had going on.

Chris,

2Checkout.com has added to their required cart parameters:

https://www.2checkout.com/documentation/newparameters.html

Do you have a version of 2checkout2.asp that will support these?

Thanks,

Nick

Please be aware folks..

This file is not provided by CJWSoft. Though this may work very well use of it is not supported in any way. We have not tested it.

This user is not using the option pack so this file will not be compatible with anyone using that because it does not have support for groups and some of the other new features.

Regardless..we appretiate users sharing ideas and solutions that they have come up with.

Chris,

I've given the IUSR account modify access for the aspprotect folder.

In the ODBC manager module on the webserver I've taken out the aspprotect access driver option.

The dataconn_inc.asp line reads as

ConnectionString = "DBQ=D:\missourirealtor.org\members\aspprotect\data\database \ASPProtect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Now this should make it DNS-less correct? with the permissions set properly?

I've also taken out the password on the access database.

The original database of users I had was an access database from a different program called spooky login.  I exported them into a tab delimited file and changed the column headings to match those in aspprotect exactly.  Actually access would not let me import them in the databases without them being exact.

I imported that information directly using access's import options.  I tried the import/export manager in aspprotect but kept timing out as well.

Your actually confusing me with the whole "joe bloe" thing and user access. I just do not get what you are trying to tell me. Perhaps you can explain in a less confusing way. Your just not technically explaining it andand thats what I need to know to possibly help.

As for the subweb thing you just can not do that. Subwebs have their own sets of application and session variables. An ASPProtect installation and any pages you protect with it are required to be in the same "application" in IIS. Sicne subwebs have their own "applications" in IIS that won't work. It is the nature of "forms based authentication" A sub web is alo considered by our licensing to be a seperate web site and ASPProtect is licensed per web site.

As for breaking pages.. you really shouldnt be editing any pages in the admin area as you will break them unles you are very good with ASP. (does not sound like you are..no offense meant at all)

Pages in the "users" folder are less complex and it is usually ok to edit them carefully.
http://www.powerasp.com/content/hintstips/common_sense.asp

Pages of your own that you password protect can still be edited in your usualy way though without effecting anything.

Truth is if you back things up before you start editing how can you go wrong ? That's how you learn.

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'ZŁ$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks

edited due to inappropriate content

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

Hi,  Its just a generic error that really doesn't mean much of anything except that something wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

could be invalid permissions on the database folder... could be any number of things

when setting up your connection I suggest going dsn-less.
http://support.cjwsoft.com/code/moreinfo9-1.htm

It is better/faster and also a lot easier to set up.

Hi - When I try the mass email feature, I get an error that says:

ODBC Microsoft access driver) too few parameters expected 1

/aspprotect/password/admin/send_mass_email.asp line 280

Oddly...this feature works fine when I use the original admin user that you setup. 

But I setup another one with my username and password (not test) - because I was afraid anything with "test" could get deleted. 

Any ideas on why the new admin userid would not work?  Note: I have not change any code from the original installation.

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

Hello,

It is very possible, however there may be some issues such as the session variables specific to a particular user would not be able to be created because there would not be a specific user.

I can't tell you exactly how to do it as it would probably take a few hours of messing around with the code to sort it out. Bascially, it's not something I could tell you how to do real quick and I do not support custimizations to the code.

But, it is very possible. You want to check the server variable for the IP address. The tricky part would be where and how this all just integrated into the "check_user_inc.asp" file

The Pop-Up Javascript Date Pickers will only show up of your server's regional settings are set to one of two lCID values.

1033 which is English - United States
mm/dd/yyyy date format

or

2057 which is English - United Kingdom
dd/mm/yyyy date format

Many servers are set to run the default LCID which is 2048 so the banner system will not show the date pickers.

This setting can however be easily overwritten when using the ASPBanner system.

or

Session.LCID = 2057

depending on what date format you are looking to use

Save the file and go edit a banner. The date pickers should be there now.

I think I've found the problem..

The password "abcdefgh" works

The password "abcdefghi" does not

(username "ace45")

Passwords can obviously only contain up to and including 8 characters... By some coincidence I only used short passwords with MS Access.

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

Not to be pushy, but how's the new version progressing?

I'm hoping these features will be in it:

• possibly add the ability to move pictures around in an album. and maybe between albums, I must also remember to move the ratings and desc as well for that image.
• possibly add a feature to store 3 versions of images uploaded
  thumbnail, medium res, and high res/original

• add option to store the images orginal name in the images description area during upload
  may be helpful to people that name their images in a somewhat descriptive way

• add support for the ibulc bulk upload client that I recently discovered

If you could use a beta tester, I'm still just setting up my site and would be willing to run a beta.

Thanks

Al

Microsoft has a free version of SQL server 2000 than you can run on a development machine.

http://www.microsoft.com/downloads/details.aspx?FamilyID=413 744d1-a0bc-479f-bafa-e4b278eb9147&DisplayLang=en

This is really the same thing as the MSDN version of SQL server that comes with Visual Studio

It is limited in two ways.

On the banner rotation order screen it says:

"The Order Of These Banners Will Change Randomly From Time To Time"

Can you tell me the function that does this? I'd like to increase the frequency with which the rotation order changes.

Thanks!

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

pretty clever...

If anyone is interested in what the Mod function actually does this article explains it nicely. They even use it for the same purpose in the examples.

http://www.asp101.com/articles/steven/mod/default.asp

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

I got ya. Well hey, that's what's great about the iframe right?

expiration dates are not used in aspprotect's database when signing someone up using PayPal subscriptions because the PayPal system keeps track of all of that and will automatically send posts to the approtect system if a user needs to be deactivated for not paying or for whatever reason.

As you will notice in that thread about subscriptions the paypal signup data you use for the person determines their membership pricing and details..
http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ;PN=1

Basically the system takes care of everything.
PayPal takes care of everything.

However you want to look at it.

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

I just took a look and that is definetly what happened.
It has nothing to do with the registration process as far as I can see.

Just running this page triggers it and I know it does not do that the way it comes.
http://www.myvirtualtutor.com/aspprotect/users/user_area.asp

Please back up what you changed and put the user area back the way it came..

If error still happens then I can help you.. It it works fine with the default files from the zip archive then you messed something up in the code.

You have to be really careful when working with ASP code.

Also: just in case you did this. " you should not be password protecting any files in the users area that are already there " the users area does it's own thing and there is no reason to be doing anything like that to the files that are already there. You can do whatever you like to files you add on your own.

Hi,

I am using the upload_post_VBSCRIPT.asp to upload the pictures. My concern is the security of this. For instance I've seen some sites get hacked by a user uploading a file (going through the same process) and ending up crashing the entire server.

I tried adding .jpeg to the end of a text file (filename.vbs.jpeg) and then uploading it, and the file was actually uploaded. Is this a potential problem?

Thanks

S