For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

I checked with our web hosting company and CDOSYS is installed and properly registered on the Windows 2003 Server our site resides on.

How do I go about changing the ASPProtect code to use CDOSYS?

Please advise.

Christopher
We are actually having a lot of problems with this software.

Apart from the above problem of the email not being in the database as details above we also do not get any reply emails from any forms, the mass email button does not appear and the forgotten password does not send emails either.

We have CDONTS Version: 2.80 Installed as the email system, this is operational on the server. I have tested this with server_info.asp to check.

I can email you direct any other information you may need.

Regards

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

Just wanted to say how much I like the program! I hunted for days and finally purchased a Perl based product. After several days of goofing with it I gave up. ASPPhoto worked right on first install!!!!

Way to go!

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

How to bring up Banner Calling Code Generators

Simply go to the zones screen.
Select a Zone from the list.
Check the "Show Banner Code" option.

Click on "Display Banners in Selected Zone"

well, I was curious myself so I just tried it.

Good news is it worked just as I thought.

Only problem is your changing things to allow authentication info to be passed over the net in a url. If you can live with the security implications then it will work. I mean a sniffer could see that and end up knowing the username and password.. not likely but just putting that out there.

Of course now that I think about it unless you are running under SSL (https://) when you log in normally that info is in the post info anyway and possible to get at.. course not right out in the open like when you put it in the url and less likely to be noticed.

As long as your not doing it to access critical areas like the admin pages... and you monitor the log files once in a while it's probably nothing to worry about.

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

(User Search & Contact Mod) for ASPProtect Version 7.x

This will allow an individual user to search for other users as well as email or call them.

Notes: This is a down and dirty mod. The users page from the admin area was used as a starting point. I then edited it up real quick to be used as a user search. The way it is it shows the user email as a regular email link. If you want to set it up so emailing is done from the application and emails are not actually shown you will have to do some extra work. If you don't want phone numbers shown you will have to remove that column which is not very difficult.

Directions:
Back up your existing ASPProtect installation.

copy "search.asp" into your "users" folder

2006-03-10_143253_User_Search_Contact_Mod.zip

Direct your users there. They will have to be logged in to view the page.

WARNING: This has not been extensively tested for SQL Injection attacks.
I think it is perfectly fine the way it is by looking it over quickly, but use it at your own risk.

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

<compilation defaultLanguage="vb" debug="false" />

change it to this

<compilation defaultLanguage="vb" debug="true" />

When you run the code in a production environment change it back though

More Info
http://support.microsoft.com/default.aspx?scid=kb;EN-US;3061 56

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

Thank you so much that works great.

I will test with the other settings on the email server again thanks for the advice,

best regards

An email I just received from eastcoastguy.. to keep this thread up to date

Some users have reported an error during the registration process.
Here is what I believe is happening.

When you register you get sent a validation email that has a link in it that looks something like this.

http://support.cjwsoft.com/forum//activate.asp?ID=testAD3AD2 97BC

That link can only be clicked on once which will activate your account.

If you somehow run that link more than once you will get a message telling you there was an error.


I think some people are double clicking on the link they get sent and running it more than once.... or clicking on it again after registration is complete. It probably happens very fast so they never see the success screen.

Either way, if you can login to the forum nothing is wrong and you are already activated.

Different Versions of the Access Database

Below is a zip file with many alternate versions of the Access Database provided to help with installation and general usage.

2005-02-20_155310_ASPProtect_Database_Versions.zip

ASPProtect.mdb is saved as an Access97 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2000 database (password "temp")
ASPProtect_access2000.mdb is saved as and Access 2002-2003 database (password "temp")
ASPProtect_access2002_no_password.mdb is saved as and Access 2002-2003 database with no password set on it

Try to use the newest version as server odbc drivers sometimes have to use the newest version for everything to work correctly. No password version is provided because sometimes there are issues connecting to a database with a password set on it.

Default username for access databases is of course "admin" but you really dont use that except in the data connection information.

For some odd reason, the the export path has two backslashes (\\) at the end, thus generating an error each time I try to export. For example

C:\path\website\protect\data\export\\

This appears toward the bottom of the import_export_manager.asp page and is called by =ExportDirectory.

I checked under settings tab, no path ends with a "\". Any idea where else I need to look?

Nick

Perfect exactly what I was looking for.

Thanks

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

You need to make sure you created the SQL database using the SQL scripts we provide and that no errors occur whatsoever. That is extremely important. You must use our SQL creation scripts.

Then, when you create the user you need to go back to that user and make sure you check the admin account and save that user again. (many times when setting up a system for someone I find myself forgetting that step and then I have to go back in and check the admin box for the user I created.)

And of course create the user from the ASPProtect admin area web interface. Do not add the user to the database manually because you will have no way to enter the password correct as it is encrypted. And do not change the encryption key after making the user/.

It would also be wise to check the SQL server database at every step to make sure the user info gets created and that all the field info looks correct for the most part.

You also want to be sure to specify SQL as the database type side the connection string info as the SQL directions go over

a remote sql server should not an issue.

thats really all I can think of right now

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

if that account isnt there thats normal because if it doesn't have any permissions for that folder so it wouldnt be listed

you simply dig into the menus a liitle deaper and find it then add it.

ok, I am home.. missed flight.. just got home an hour ago.

lets see.. I really need more info...

For starters are you using the delayed stats feature ? that is expirmental and could cause that problem

If you would like me to, I also have no problem going into your machine real quick via remote access and setting permissions / putting the right connecting string in there for you.

I need to go in as an administator though to set the permissions.

you do not run "check_user_inc.asp" by itself

Pages you protect include that file at the top.. when they someone goes  to a protected page if not logged in a user then sees a login prompt..

after loggin in they see that same page as normal

its an automated process..

now, that being said if you really want to you a specify a page to be redirected to after the 1st login when you edit a users info. You can also redirect anyone anywhere like using a simple ASP redirect statement in your code.

Personally I feel that redirecting people all over the place is poor site design. ASP is all about dynamic code and ASPProtect is all about dynamically tailoring pages to the current logged in users... so why redirect people all over the place.. it justs complicates things because you still need to password protect the places you send them to.... which means twice the work and twice the confusion.


Also, here is a Version 6 thread about redirecting manually that still applies to version 7.

http://support.cjwsoft.com/code/moreinfo17-1.htm

You can mix and match banner calling methods all you want.
Try it and see what happens.

However, the only method that is going to work on non ".asp" pages is the javascript or the new iframe method listed in the support forums.

This user is talking about preparing more than 100 pics at a time for an album that already exists and doing it using linux.

I asked the user to post the code here because I think it is interesting and it may help someone who is working with the app.

This article is not for everyone for a few reasons.

1.) The application can already mass import pics on it's own. It does 100 pics pretty quickly on a decent server. The built in method also resizes pictures and make low res thumbnails should your server support a supported ASP image resizing component. The method above simply rename pictures in a folder so the application will see them as part of an album.

2.) We don't support or recommend that anyone sets the application to use more than 100 pics per album. It is just not tuned for that and there will be issues. Please dont ask me what they are as it is complicated and I am not sure/dont remember what they all are.

3.) Your going to have to be familiar with linux to use the code shown above.

humm, those are some very big images to be starting off with but I am not sure that would cause a problem under the importing scenario

what width are you having the system resize them to ?

What happens when you upload a image manually (one a t a time)

Also, try the import process out with some pictures no bigger than say 1024 and lets see what happens

I have written asp.net application pages- obviously i knew what viewstate was, or else when they made a mistake on that page it would not have saved their filled in info. Same thing for after they submitted, when they hit the back button their info would be gone.

For someone who wrote this software it seems you are not able to do simple things. Im begining to think you didn't write it. The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

I know how the log boxes work. Esp. reg ASP... they all allow you to enter your username and password and then when you hit submit it gets verified and transfers you to your destination. ASP.NET has that capability also.. i didn't purchase a program to go and have to re-write it in visual studio. It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

The program seems to have some great complex features, however, your not able to incorporate this easy login from a diff. page function... fishy

Your probably talking about "Session.Timeout" which is a feature of the IIS webserver. Please do a google search on it for more information.

In the meatime if you look at the top of the "check_user_inc.asp" file you should see a section like this where you can try to change the value.

' Minutes you want before the session times out.
' This is set on the server to be default to 15 or 20 minutes depending on the server version
' You can change it there or override it here.
Session.Timeout = 30

Specifying it like that is supposed to overwrite the value for your web in the IIS console which is usualy 20 minutes.

You should not have single quotes around the "-1" because Album_Active is not a string field in the database. It's true/false or bit field in the database depending on the database you are using (MSSQL or ACCESS)

I'd do it a little more like this I think.

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = 1"

I took out the parentheses as well since I dont believe they are needed in a simple case like this

but is hard to say unless your the one testing it... my version might have a mistake as I am a little rusty with my SQL at the moment

also: in case your wondering...
depending on the situation and the odbc drivers the 1 and -1 should work either way but sometimes it's picky and you have to do it one way or the other