one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

Hi

I would like to ensure the the user uses a UK style postcode not a clue how to ensure this as I am new to asp. Any ideas?

regards

John

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

I am using VS 2005, when i go to new project in visual basic folder asp.net web application is not there..

Can i add it somehow?

1) Does everything, i.e. every user, every category, every product, etc., get stored in just one single database, or are there multiple databases at work and are linked to one another?  I am asking because there is only one table in the DB, and it is the "Users" table.  So I am presuming that there must be other databases that are linked to the DB.  Is this correct? 

2) Are user-level security permissions utilized in the sample Access DB that is shipped with the software?  I am asking because we cannot seem to remove the "temp" password no matter what we try, and this is the only reason I can think of. 

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

ahhh ok.. I was going to wait till morning to answer this one..

glad ya figured it out

Ok i am having an issue with my other comp. I have spent ANOTHER 3 hours researching this one.... it WONT START THE IIS SERVICE!!!

I get this error:

The service did not respond to the start or control request in a timely fashion

ANYWAY---

I decided to use one of my client's hosts; which happens to be Network Solutions.

ANYWAY again-

I uploaded the whole thing there and they advised me they cannot do the explicit permissions on that _database folder. This is what they said: I would also would like to point out that ASP.NET applications and permissions do not extend to any other folder, other than the root, (/htdocs/), and the bin, (/htdocs/bin/) folders.  Sub-directories and folder after bin and htdocs will not have ASP.NET permission (read or write).

If you could move or reconfigure your application to save all your code behind, include and dll files onto the root or bin folder, your application could work or possibly run as you would expect.  Please have this done and retest your application. If and when you get a different problem or another error after doing so, please let us know, and we shall be happy to help you troubleshoot any problems that you may have.

There is a 'create database option'  where i can create a database..create a dsnname, user name, password and have to specify the database file name. Once i do this i need to place the database file (aspprotectnet2002.mdb) in the /db folder within the root. I also tried this and made the appropriate change in the web.config but it STILL DOES NOT WORK. I AM PULLING MY HAIROUT WHY WONT ANYTHING WORK.

ALL THE FILES ON ON THE ROOT OF THE WEB HOST. I PULLED THE FILES OUT OF THE _DATABASE FOLDER AND DUMPED THEM ON THE ROOT. I CHANGED THAT ON THE WEB.CONFIG BUT ITS STILL LOOKING FOR SOME .XML FILE IN THAT _DATABASE FOLDER.

I'VE BEEN TRYING EVERYTHING AND IT SEEMS THAT I CANT USE THIS SOFTWARE FOR THE LIFE OF ME

ok...

you got problems if you cant import a file created by the system..

You using SQL or MSACCESS and do any of the users data have apostraphes in it ?

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application

Hi,

I need to be able to add about 9 checkboxes to the register.asp. would I be able to use one of the custom fields?

The other thing is once I add the checkboxes the value must be written to the DB and later read when displaying the person's Album.

Any idea on how I can do this.

Thanks

check permissions for the user you are connecting to the SQL database.
http://support.cjwsoft.com/code/moreinfo122-1.htm

That user may not have permission to make new data

Also,  check all field and table settings manually by comparing them to the SQL creation script we provide. You may very well be missing auto increment and primary keys which would make adding new data not work.

It is most likely one of those two things.

The ASP error on the home page has been solved -There was aproblem with the path that was including the home page file and we fixed it.

However the error on the member page remains - any ideas/suggestions would be appreciated. This is the error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for

process 0x748 Thread 0xad8 DBC 0x214734c Jet'.

/aspboard/forum/global.asp, line 15

When I attempt to upload, it appears that the image uploads. I get a "Original Image Size 0 X 0 pixels"

they don't appear in the web pages, any thoughts? I am using VBscript to upload, my host has safileup but I am unable to use it in this script, thanks for any help

http://mcintoshcounty.org/real_estate/extras/server_info.asp

here's the site link

Never mind, had the path to the image folder screwed up 

this error really does not mean anything specific

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard"

If you get an error its real weird that the file is being uploaded.
Generally if you get an error during upload it is because of one of these 3 things

Invalid physical path specified

Unsupported upload method chosen

Permissions

See my article on XP and permissions
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

many people dont do their permissions right on XP Pro and that article covers everything

Hi there,

Just bought ASPProtect 7.0 last week and just got around to installing it. I've gotten through the installation and am now trying to test the (Forgot Password) functionality.

I get the following error when I type in the e-mail (or in some cases the username) and Post the form. 

Error was [11004] Valid name, no data record of requested type

I know that the add user functionality is pointing to the correct database (I see the additional rows via SQL Enterprise Manager) and that the e-mail address I am looking for is in the SQL database. 

Any ideas? Any other information you need?

Thanks,
Toni

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

The code is ok..

Your getting an error because no banners are showing up in that zones rotation.

run this directly in the browser and you will see that there are no banners being generated for that zone ID
http://www.poconocommuter.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=6

As a matter of fact I dont see any banners showing up for any zones previous to 6 which tells me either you dont have valid banners in there or the application variable info got corrupted do to a server crash / power off or something.

http://support.cjwsoft.com/code/moreinfo95-1.htm

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about

I have connected to countless DB's using my own applications written in dreamweaver and have tested them on my own server and also my web facing one.  BUT this seems to be different.  no matter what I try I still get this error.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x440 Thread 0x6b0 DBC 0x1f995bc Jet'.

On both a windows 2000 server and also a windows 2003 server. Also using both DSN and DSN less connection and oledb.

Any help would be greatly apprectiated.

Thanks

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

I am trying to set up ASP protect 6 and have a problem that when a new user registers their email is not transferred to the database.

I can see the rest of their entries both in the database and in the admin/edit form but not the email.

Any ideas?

I am not entirely sure how one configures the system to assign a user to a specific group.  For example, let say I have created two groups A and B, and I have pages protected by the code generated in the admin area for groups A and B.  I know I can assign access to these groups in the admin area.  However,  it is not clear to me how I do it automatically through the registration process.