Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

How do I change the character length for the description field?

all I can say is try other things...  like

mail.yoursite.com

or

smtp.yoursite.com

etc etc etc

replacing yoursite with the name of your domain of course


the settings for sending email via ASP are no different then the settings you would use in outlook or something... except sometimes on the server level localhost works as the email server because they set it up to allow that

and of course those 3rd party emailing components need to actually be installed on the server

I think you getting all confused about dsn's and what they really are.

A system dsn gets created via the ODBC control panel and gets listed there. A system dsn is nothing more than a registry entry telling information about where the database is an how to connect to it. Then every time code accesses the database it has to do a registry lookup. The whole process adds a lot of delays, causes very poor performance and is unnecessary.

A dsn-less connection simply connects directly to the database by specifying the driver being used, where the database is, and some other information like the password if there is one.

To get aspprotect or any other ASP application using a database all you have to do is make sure the database folder has correct permissions and then make a connection string like so. (with the correct info for your directory structure of course)

DBQ=c:\inetpub\wwwroot\aspprotect_6\data\database\ASPProtect _access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp

If you are wondering Access databases always use the same username.

So, basically if permissions are set correctly and the directory is valid it will work.
It is really that simple. 99% of the time when people have problems it is one or the other.

That being said, don't worry about the odbc control panel and what is listed there for connections. All we really care about is that odbc drivers are installed and somewhat current.


One last thign for reference: even if you do make a system dsn the database folder still needs the correct permissions.

Gotcha.

Can you set an expiration date on a subscription?

Thanks,

Jess

ASPProtect v7.x has a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customer that was using them.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

and so on... I think you should get the picture by now

The setting I am most interested in is what you have for the "Pic_Max_Image_Width" used when the image resizing components resize the big image

setting it to nothing or zero could cause this

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

I am up to speed on how it works. My goal was to not have just a link to a protected page- so that when a user clicks it they get the "access denied" screen and then have to log in. My goal was to avoid that if possible by having them log in and then redirected to the protected page.

So this isnt possible? The only way for it to work is for a user to click a link to the protected page, get the denied screen, then login and be redirected?

Or is there another way..?

I made my point by rebuttling your "cafepress" with agreeing "YES" that is what i want... now you are changing this around on me. I dont think i can be ANY clearer in what i intend to do. It is extremely clear and i am not sure why its becoming more than it should be. I just want the user to be able to log in from ANY PAGE ON THE WEBSITE AND THEN BE REDIRECTED TO THE PROTECTED PAGE IF THE HAVE THE PROPER CREDENTIALS. It would be nice if this software gave an error message when an incorrect username/password was entered instead of simply refreshing the screen.

That did the trick. Once again a quick very helpfull reply.

Thanks.

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

I'm using ASPimage and have the maximum width set to 320 in the settings.  Also using SAFileUP ver. 4.0.

Files upload okay, and the script displays a confirmation that the image was resized to 320, but the actual image uploaded is displaying full size rather than reduced to 320.

Also, the thumbnails are not displayed in the Picture Manager. Would indicated ASPImage is not working or the script is not communicating with it.

Suggestions?

I just did a quick google search... found a ton of info on how to find the setting. Here is one...

These are directions for IIS6 but the process is similar for IIS4-5

1. Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
2. Double-click your computer name in the left pane, and then double-click Web Sites.
3. Locate the Web site and directory that houses the ASP application.
4. Right-click the application site or directory, and then click Properties.
5. Select Home Directory, and then click Configuration.
6. Click Options, and then click to select the Enable Parent Paths check box.
7. Click OK two times.

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

the sql databse is the same.. the sql script is the same for any version

as the site says they are essentially the same app with very minor changes... if you are trying to share the same sql database with both it's not gonna happen because the table names are the same

truthfully:
that app runs nealry as well with msaccess as it does with sql so I wouldnt get too excited about running it withe sql. You will not see any benefits unless you have a ton of simultaneus (sp) users.

The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

ok, well as far as what else to try I already told you..

you need to manually compare all those field settings with the sql script and make sure they all got set correctly...

you also need to tell me what email/name you ordered the application under... before I will continue this support with you.. at this point I don't know if you purchased the application or if you are using the unsupported lite version

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

You are right, there are NO entries in the "PayPal_Subscriber_ID" field at all. Any way of fixing this?

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

Yes, I was referring to ASP Protect.

I had about a dozen people access the same account, but it is highly unlikely that they would all try at the same time (unless there were several hundred people who had access). Having an enhanced login abuse would be nice.

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

Ohhh...

I was thinking it worked like this; A user goes to that page and logs in.. and from there they can then browse the site and do what they want..

So in order for it to work i need to edit a page say... members.aspx (i assume it needs to be an asp.net page) and in the header put that protect code and when a user accesses it, it will prompt them for their un and pw and then if correct will allow them to view the page... and likewise if they are still logged in will be able to use the page?

If that is how to works as i mentioned above thats great...

I understand the redirect principle...but say i have a log in box on the main page... you know like most pages have a user log in on the left hand side... i wanted to do that. But i cant obviously protect the main home page or else normal users will not be able to view it without logging in or registering

yeah.. I cant say for sure.. as I have never really tried to get it working in xp pro.

Last time I actually used cdonts locally was on a 2000 box

I would do a google search on xp pro, smtp service, and cdonts and let us know what you find out.

All of our apps can use free 3rd part emailing components as well so maybe try some of those. Course you need a valid email server to connect to.