This may be an old question ??? If it is please point me to the post or documentation where I can find the answer please.

When creating protected pages I am using the following to protect them:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="/aspprotect/check_user_inc.asp"-->

But that is not working. I get the following error when I try to access the members logon page in the directory that I wish to add the pages to:

Active Server Pages error 'ASP 0130'

Invalid File attribute

/filelocation/filename.asp, line 3

File attribute '/aspprotect/check_user_inc.asp' cannot start with forward slash or back slash.

However if I create the pages in the root of the AspProtect directory and use a link to the same page that exists in the AspProtect directory and the following include:

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

The pages work fine.

I really do not want to put all of my protected pages in the root of the AspProtect directory.

 I would like to mix protected and unprotected pages throughout the site in order to #1 make it easier to administer. #2 keep the AspProtect directory solely for authentication. And, #3 keep any user authentication pages out of the AspProtect directory.

TIA

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

Why all the pages at the directory .../password_admin/ are very slow to open online?

http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

When I add a user, I can not activat it.

What do you have the registration type set to in the settings ?
They wont be activated automatically unless you have "automatically" selected ?

It sends me back to log on and will now allow me to log in as admin???

I am not quite sure I understand ? Seems to me like that would be normal because you can always log in as the admin at any time. If you cant log in as the user you just signed up as that could be for a couple reasons relating to the registration type you have slected in the settings. There are 3 types all epxlained in the settings screen. Some require manual activation byt the admin, some involve a registration email.. etc etc

I can restart the APP and log in as Admin, but the user I added
is still not activated??

How and why are you restarting the applicaton ? Please explain what your doing there.

My system will also not allow me to set the Stay Loged in FLag.
It just ignores it....

As I told you in an email earlier cookies must be enabled for authentication to work. You mentioned now you can not log off ? I am not sure I know what you mean by that. I assume you know to close all browser windows when testing things like this and I assume you know you have specifically log off and confim it in order to remove the remember me cookie and have to log in again when you return to the site.

Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page.   the url when the error appears is: .../users/add_new_account.asp

I think the error has to do with my email component setting - becuase it works fine otherwise.

I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com

Note: I receive the email notification and the user does get added.

Can you help please? Shirley

UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

You would carefully use the built in features of access to import/export data.

The password for our databases is noted in the documentation. It's pretty hard to miss really. You can also see the database password by looking at the connection string info.

different versions may be different but it is usually "temp" minus the quotes

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

ok,

when you say "we have set up to use the Subscription services exclusively for all new members "

I am sorry to have to ask this again but what does that mean exactly ?

how was that accomplished ?

The reason I say this is because when a subscription is created by a user through the normal channels.. meaning they went to the paypal subscription directory and either started a new account or found their old one to start a subscription with.. either way the PayPal Subscripber ID that paypal assigns is added to the database for that user and the expiration date is set to null.

Now, that being said the function that sends expiration emails to users will NEVER send an expiration to a user that has info in their PayPal Subscriber Field in the database. I just double checked that.

So that is where I am confused ? How did all these users get set up to use subscriptions and not have the PayPal Subscriber ID field popluated in the database ?

Seems to me the only way this could happen is if you set some stuff up manually and the PayPal Subscriber ID for each user never got put in the database. That and the expiration date didnt get set to null.

Again, I am sorry to keep asking this but it just seems to me that something else must be going on that I am not clear on regarding how you upgraded these people to use subscriptions.

In the end I think the answer may be to manually make sure each old user now using subscriptions has their PayPal Subscription ID set in the database as well as their expiration date from before set to null.

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

If logfiles do not get created it is most likely one of 3 things

1. invalid physical path specified
2. permisssions
3. filesystem object is disabled on the server

that path doesn't look correct to me for a live professionally set up server but only you or your server admins can know that for sure

you will not get any errors when things arent perfect.. just no physical logs

RecentActiveUsers and RecentPageRequrests are not related to the stored logfile feature.. Recent Activity is a different thing

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

Could be a mod I guess - it would be nice to have an option on the admin settings page to lock down access of all pages and redirect to a specified  "lockdown" page upon attempted login.

If I'm updating the large files on the server and someone attempts a download, they'll get a partial ZIP file or an error.

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

thx, thats a known error I forgot about.

I just updated the zip archive so the error is gone but if you bought ASPBanner Unlimited Version 7.3 Before April/06/2004 you can optionally apply the fix.


To fix it (only if you want to use the option explicit method of calling banners and not even a really necessary fix as this is just an error in the generated code your supposed to use)

Just edit aspbanner/zones.asp with a text editor.

Where you see the double dim carefully remove one of the "dim" s and save the file.

OK, well, that error is pretty self explanatory really. There isn't anything else it could mean.

What you showed me in that screen shot all looked correct, but still permissions to that file just can't be correct. The paths are correct. The path to the file looks correct. The ASPNET (ASP.NET) account looks correct.

I would try settings permissions directly on that XML file. Perhaps child permissions did not go through the way you intended. (the advanced tab must be used for that) If that doesn't work try giving ASPNET and Everyone full permissions on the file directly.

Possibly check the paths in the web.config file just for the heck of it.

Last case scenario, you can edit that XML file directly instead of using the screens in the application. Of course if that file does not have correct permission chances are other things like log files will give you issues as well.

That is all I can think of right now.

ok

I am a little confused here.  I am in the process of understand how this all works, mainly the email portions as I am running this through a home server (Windows XP).  I have tried test emails, but they are not going threw.  I ran the server_info.asp and it is telling me that I do have CDONTS installed, version 2.8.  Then I tried running, the test_mailer_component.asp.  This page is telling me it is not installed.  This process lead me to start looking at my components for my IIS.  Everything appears to be there. 

Any ideas, where I should go next.  It appears the CDONTS code is in every page that it needs to be in, and it appears that I have it installed, but there is a disconnect between the two..

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

Hello,

 I need some help with the following code. Please look at the area in red. I need to be able to set someting up to where the variable eval1 (a yes/no field in my database) is set to false after the associated link is pressed.

Thank you

="vbscript" %>
<!--#INCLUDE virtual="/irp/check_user_inc.asp"-->
<html>

<head>
<title>Administrator Evaluations</title>
<style>
<!--
 div.MsoNormal
 {mso-style-parent:"";
 margin-bottom:.0001pt;
 font-size:12.0pt;
 font-family:"Times New Roman";
 margin-left:0in; margin-right:0in; margin-top:0in}
-->
</style>
</head>

<body background="../images/1.gif" bgcolor="#C0B59A" vlink="#FF0000" alink="#FF0000" link="#0000FF">

<p><map name="FPMap1">
<area href="http://www.utb.edu/" shape="rect" coords="627, 66, 670, 81"></map>
<span lang="en-us">&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;
</span>
<img border="0" src="https://blue.utb.edu/irp/Inst-Research&Plan.jpg" usemap="#FPMap1" width="675" height="82"><br>
&nbsp;</p>
<h2 align="center"><span lang="en-us">Administrator Evaluations</span></h2>
<p align="center">&nbsp;</p>
<p align="left"><span lang="en-us">&nbsp;<b>Welcome,&nbsp; </b>  </span> <b> <% Response.Write(Session("FIRST_NAME")) %>
</b>
</p>
<p align="left"><b><span lang="en-us">On this page, you will see a list of names
that represent the persons that you will be evaluating this year.
Please click on a name to select that persons evaluation form. Once you have completed
and submitted that persons evaluation, you will be returned back to this page to
continue with the next person on your list. Once you have completed all your
evaluations, you can log off the system using the link below.</span></b></p>
<p align="left"><b><span lang="en-us">Please note: Only <u>1</u> submission per
person will be accepted, any additional submissions will not be accepted.</span></b></p>
<p align="left"><span lang="en-us"><b>If you have any questions please feel free
to contact us at the number below.</b></span></p>
<hr color="#FF9933" width="80%" size="3">
<p align="center"><span lang="en-us"><b>Please click on a name below to begin
the evaluation process.</b></span></p>
<div align="center">
<table>
         
       <%If Session("Link1_Name") <> "" Then %>
    <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr><td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link1"))%>" onclick="<%=Session("eval1")="true"%>;return true" </href>  <font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link1_Name"))%>< /span></font></a></span> </td>
  </tr>
  <%End If%>  
       
   
  <%If Session("Link2_Name") <> "" Then %>
  <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr>
  <td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link2"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link2_Name"))%>< /span></font></a></span></td>
  </tr>
  <%End If%>
 
  
  
  <%If Session("Link3_Name") <> "" Then %>
        <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr>
   <td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link3"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link3_Name"))%>< /span></font></a></span></td>
  </tr>
  <%End If%>
  
 
POST EDITED / SOME CODE REMOVED TO KEEP IT SHORTER .. 
This went to Link3_Name    
    
 
</table>
<p>&nbsp;</p>
<p><span lang="en-us"><b>If you have completed all your evaluations and wish to
log out please click <a href="log_off.asp">here.</a></b></span> </p>
<p>&nbsp;</div>
<div class="MsoNormal" align="center" style="text-align:center">
 <hr size="3" width="80%" noshade color="#ff9933" align="center"></div>
<p align="center" style="text-align:center"><b>Institutional Research and Planning
<br>
Tandy 270<br>
80 Fort Brown<br>
Brownsville, TX 78520</b></p>
<p align="center" style="text-align:center"><b>Phone: 956-544-8816&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Fax: 956-983-7652<br>
E-Mail:
<a style="color: blue; text-decoration: underline; text-underline: single" href="mailto:iresearch@utb.edu?subject=Administrators%20Evaluation">
iresearch@utb.edu</a></b></p>

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL

It's just a generic error that means one of 1000 different things is wrong.. there is a lot of information on in in these forums as well as links to articles about it.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

usually it means permissions to the database folder are incorrect or the physical path you are specifying for your dsn-less connection is invalid..

everything has to be perfect

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks

Just wanted to let you know that after modifying the remote host string in the email pages and getting the correct connection from my server, everything is running fine.

I hope you enjoyed your vacation.

thank you
adam

The album ID thing is completely normal and by design. Once an ID in the database is used it can not be used again. That is how autonumber fields in a database work.

As far as not being able to delete images... Are you by chance using ASP.NET to show dynamic thumbnails... Because if you are you must turn that feature off and wait 20 minutes or so (maybe more) before you will be able to delete any of the images. It is because the current version of the ASP.NET script used to make the thumbnails locks the images on the server temporarily anytime it creates a thumbnail.

It is a known issue... and there is no fix at the moment other than what I told you above.

Sounds great, Sold!

Thanks Christopher!

here is the answer
http://www.iisanswers.com/IIS51.htm

CDONTS

CDONTS (Colloaborative Data Objects for NT Server) is a feature of NT and W2K that allows you to easily send mail from a web page using the SMTP server. The simplicity of the code and widespread availability of free scripts employing CDONTS has resulted in  CDONTS being widely adopted.

Quite a surprise to many administrators to discover that IIS 5.1 does not support CDONTS as do IIS 4.0 and IIS 5.0. This has been replaced by CDOSYS which appears to have more capability, but it is not quite as simple to use. See: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q195 683 for more details.

You can enable CDONTS on XP by copying CDONTS.DLL from a Windows 2000 installation to your XP system’s Windows\System32 folder (default name). Then at command prompt Windows\System32 run REGSRV32 CDONTS.DLL. The extent of my testing on this was to deliver one piece of mail, so this should not be construed as a complete analysis of the effectiveness of this technique.

I purchased the ASPGallery Pro last week and still cannot get it running. When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

Below is the connection string. My hosting company uses server map paths:

'Create database connection

'Create a connection odject
Set adoCon = Server.CreateObject("ADODB.Connection")

'Database connection info and driver
'strCon = "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("aspgallery_access2002.mdb")

'Alternative drivers faster than the generic access one above
'strCon = "Provider=Microsoft.Jet.OLEDB.3.51; Data Source=" & Server.MapPath("aspgallery_access97.mdb") 'This one is if you use Access 97
'strCon = "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath("aspgallery_access2000.mdb") 'This one is for Access 2000/2002
GalleryConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Jet OLEDB:Database Password=temp; Data Source=\\NAWINFS04\home\users\web\b2623\rh.vickery2004\aspga llery\aspgallery_access2002.mdb; "
GalleryDatabaseType = "MSACCESS"

adoCon.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&Server.MapPath ("\aspgallery\aspgallery_access2002.mdb") & ";"

Definitely need some assistance!

Rhona (rookie asp) -

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

I believe what happened is we received the older copy of ASP Banner iwht our purchase of ASP Protect and were notified of a free update to download aspbanner_unlimited_v8.2_feb_26_2005.zip which we did, and that's the one i recently put on our site.

  Sounds from your reply that something technical is going on to the point where I will have to hire one of our Web consutants to dissect for us.  We'll try again and track our issues and send another request for information when we can show you a specific example of what is happening.  I'll be in touch.

Glad it worked