I'd say that the vendor is right so I've submitted a work order to
create the *****.com/aspnetprotect directory as an application.
If there are any other directories for which this needs to be done,
please let us know. This particular task always needs to be performed
by our staff.


If you need to follow up on this job with one of our on-line or phone
technicians, you can reference ticket id 11860.

With regards

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

Chris -

I am encountering a problem with items showing up.  When I click on a category and then select an item to view I get

THIS ITEM IS NO LONGER ACTIVE
DO NOT CONTACT THIS USER AS THIS ITEM HAS BEEN TURNED OFF
OR THE USER HAS SOLD THE ITEM.

I have verified the item has the item_active check.  For giggles, I even unchecked with the same results.

Thoughts?

Okay,  I deleted out the aspprotect folder and started over.  I also took out the dsn connection to the ecommerce database and deleted out the subweb that had it, I decided to use another provided where the database is resident on thier servers not mine.

I broke my txt file into groups and it's loading sort of.  The first 1000 users uploaded fine...the second said it timed out, but when I looked at the access database it showed 2000 people.   The login still times out and every page seems to load incredibly slow still.

as far as sql goes if you follow the instructions with give for setting up a new database you shouldnt have any issues and permissions should be already set. because we handle that in the sql script we give you.. "its a good thing to look at and it is pretty easy to understand what is going on""

however using another account could cause permissions issues.."yes, even sa"     basically the username your using needs datareader and datawriter permissions to all tables used by the photo gallery system and you probably have to go specifically set them usin ght e security tab for your database in enterprise manager. This is more of SQL server 101 than anything to do with the Photo Gallery Code so I am not going to get into it too deeply, but that is definetly the issue.  Permissions...

The main users screen... the 1st screen you see when you go to the admin area..  where you email an individual user..

The settings I am referring to being the various emailing settings on the settings screen, The settings you showed me.

As for emailing via a remote server over dsl. It may not be working because the ISP's block the port (25) to stop people from running email servers over their dsl.

Your POP3 works because POP3 uses port 110.

If you want to send emails from your local server on your dsl you should probably install the SMTP service of IIS if you have not and send emails using that with CDOSYS. Either that or get a commerical DSL account with a static IP that allows for running email servers.

Great suggestion, routing the banner click through an intermediate page before the destination.  We use Deepmetrix LiveSTATS.xsp V7 and I should be able to configure a filter to capture the stats of the intermediate page.

Thanks for the help!
Lance

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about

The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

banner_redirect.asp, line 36

Database - MS SQL Server.

At one point I was using CDONTS_Installed but since I moved to a new Windows 2003 server I was told by my ISP that either one of these will work

Disallowed Parent Path

The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory. 

When you get an error like this it is because parent paths are disabled on the web server. This is a setting in the IIS console for your website.

If it is not enabled on you server you will have to ask your host to enable parent paths for your website.

This is what the settings screen looks like on an XP Machine

Additional Information:

It is enabled by default on IIS4-IIS5 but in IIS6 it is disabled by default.
It is a minor security risk to have enabled and some hosts can be difficult about setting it.

Truth is, if your hosting ASP for customers you need to enable this setting if the customer requests it. Especially since 90% of the ASP applications out there require the setting.

Hosting companies should if they are serious about hosting ASP.


If they won't your only option is to go through all the code and convert the file includes to virtual includes.

http://www.powerasp.com/content/code-snippets/includes.asp

The trouble with virtual includes is they are different depending on the layout of your website. (that's why web application developers generally don't use them)

Basically if you are in a sub domain the path for the virtual include is going to be different then if you were in the root.. etc etc

Also.. someone developing on a local machine would need totally different virtual includes on the development server than they would on the live server. Server Side includes are processed before ASP so there is no way to make them SMART, so to speak. Server Side includes are hardcoded and that's that.

In my opinion virtual includes are pretty useless for commercial web based applications...  Since you don't know where the customers plan to install the apps.
And YES there are some tricks when designing the applications that make it less of an issue but they are not perfect solutions.

For example...

The virtual include below would work if the application or code was installed in the root
<!--#include virtual = /somefile.asp"-->

But if the application or code was installed in a directory called "somedirectory" the virtual include directive would need to look like this

<!--#include virtual = "/somedirectory/somefile.asp"-->

Thanks!  Will try both.

Appreciate the support.

Chris, I'm having problems getting this to work. When I plug in the redirect URL and then try to load the web page, the Flash ad never loads successfully - just its black background in the 468 x 60 space. Here's an example of what I'm seeing:

http://www.innovationtools.com/Articles/ArticleHeadlines.asp

Just keep refreshing the page until the black rectangle appears. And here is the code I've loaded for this flash ad:

<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
 codebase=" http://active.macromedia.com/flash2/cabs/swflash.cab#version =4,0,0,0" ID=banner WIDTH="468" HEIGHT="60">
 <PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">
 <PARAM NAME=quality VALUE=high>
 <PARAM NAME=bgcolor VALUE=#000000>
 <embed src=" http://www.innovationtools.com/aspbanner/aspbanner/images/ba nners/mindmatters_innovation3.swf "
quality="high" bgcolor="#3CBDCD" WIDTH="468" HEIGHT="60" TYPE="application/x-shockwave-flash" PLUGINSPAGE=" http://www.macromedia.com/shockwave/download/index.cgi?P1_Pr od_Version=ShockwaveFlash">
</OBJECT>

What am I doing wrong? By the way, I'm using the standard version of ASPBanner. Not sure of the version, but it dates from about 2002.

It is refered to as the internet guest account but that isn't the actual username. The username is different for every machine. It usually starts off with "IUSR_" and then your machine name. "Internet Guest Account" is always the account's full name as labeled by IIS when it is installed.

Regardless,

If an account isn't listed you have to add it.

Click (add-advanced-find now) and it will list off all the user accounts on the machine

You can also click (add-advanced) and simply type in the account name or part of it.

Some more tips:

If on a local machine you always just give the "everyone" account full control which is pretty much going to make anything work.

You can also go to computer management in your server's administrative tools and view all of the accounts  and groups there under "Local Users and Groups".

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

That was wrong of me but not what I meant. It seems as soon as I purchase something like this it doesn't work right and it can't be altered to work with what I have. The support ends up sucking or being none. Listen I’ve gone thru you're product and it's wonderful and does exactly what you say it does so that's a relief. Sorry about my ignorance with .NET but I’m from an ASP world and it's a lot different. You can see what I’m trying to protect here http://www.hotmixxent.com:8087/default.aspx. The final site after testing will be http://mxais.sfmx.org/default.aspx. Again thanks for the support on Christmas Sunday, that’s defiantly beyond the call and I appreciate it a lot.

Sounds to me like you got some bad databases or something. Or your trying to open a database with too old of a version of msaccess.. not sure

Everything is stored in one database. And yes there is more than just the users table.

Also,  removing the "temp" password should be a piece of cake.

Email me for a new copy of the download file ? Use the contact from on the cjwsoft site. Please tell me your order details as well so I know who you are.

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

I understand the encryption for security, but I am using ASPP for a very low security function and don't want encryption.

Can't I simply delete the code that does encryption?

If not, how can I

take my ASPProtect_access2002.mdb that was opened on my local host, with my own users added with text passwords,

export to a delimited text file, import it into ASPP with my own passwords encrypted, the use that file instead of my old .mdb file? Thanks

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.

I just finished implementing the V7 product on our site and someone made mention that on the profile form where you are asked all your personal and user information there are 2 fields for passwords.  The first field uses masking to hide the password as you type it, where the second shows it in clear text.

Now we know that the only people able to see the password are the user and the administrator, but it is playing mind games with my users as they think there is a problem with the application.  I am not a programmer (however, learning ASP slowly now!) and am not sure if you did this on purpose or if it is a bug?

If it was done on purpose, can you advise how I can make the confirm password field masked as well to eliminate the unfounded questions!

Thanks

I am using VS 2005, when i go to new project in visual basic folder asp.net web application is not there..

Can i add it somehow?

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy