Yes.

Now its OK

Thanks Christopher

Chris, that fixed it.  Found 2-references to guestbook2 in the file show_messages_inc.asp located in the \guestbook\ directory.

Suggestion for future release.  Create an option to email the admin when a message is posted.  If this code already exists please advise.

Thanks, Lance

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

so you are using the subscriptions signup directory right ?
"paypal_signup2" ?

1st.. I would check that the xml parser is working.

It is required for making the post back to paypal.
It is installed on windows 2000 and 2003 and XP by default.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=134& ; ; ; ; ; ;PN=1


Then I would check the actual form page to paypal to make sure it is generating a valid IPN url as a hidden form value.  It's the payment page you actually click on that actually takes you to paypal. For the subscription signup system that page is called "paypal1.asp"


You'll want to go through the process starting with the default.asp of the signup folder untill you get to that page. Then you want to look at the html source of that page in Internet Explorer. Your looking for something like this in the source code and you want to make sure it is valid.

<input type="hidden" name="notify_url" value=http://www.mysite.com/aspprotect/paypal_sub_signup/ipn.asp>

It also has to a url on the internet that paypals server can see. It can not be a local url for your machine. Also: If it is not valid we can try hard coding it.


If all of these things are good I'll have to take a look. I have some text file logging I can do when paypal hits your IPN url that can tell us if it is actually hitting that page like it is supposed to. And I can test the system for you by making some 1 cent payments using my own paypal account until we find out what is going wrong.

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

Using "Email Authentication" as a registration option you cannot do that. There is no possible way I know of to have a delay on the authentication email like that. Also that method is not intended to involve any sort of manual registration like what you are doing.

Because you want to review people manually you need to change to registration process to "manual" and then send the email out manually from the users screen after making a user active.

Chris,

Yesterday when I would access the get_me_in page with the password key, I was then taken to the default login page.  It did not give me the option to create a user. 

Today, when I entered the password key into the get_me_in page, I was taken right to the create user page.  So, yes the problem has been resolved.  I have no idea why though.

thats because you can not have exchange server running at the same time as the windows IIS virtual smtp server..

they clash with one another... and thats why the emails never get picked up by the iis stmp server

you have to send the emails another way like using a true remote mail server..  I am not sure but if your exchange server can do pop 3 you can probably use that that way

you may be able to change the pickup directory that cdosys uses under the virtual SMTP scenario, but I am not sure if that will work with exchange picking it up, but maybe it will work ok because you said it does when you paste them in there manually.. I do not really know.. you'd have to try it and edit the email sub routine to use that pickup path

"scripts/emailing_subs_inc.asp" is where you could try editing that path

The pages in the ASProtect Full version that have emailing code in them are as follows.

password_admin/email_user.asp

password_admin/send_mass_email.asp

users/add_new_account.asp

users/email_password.asp

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on an aspbanner database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner table in the database

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

The stat not show when  impression over  xxxxxx

I use  aspbanner v8.1   MS SQL version

Total Impressions	83523
Total Clicks	7
Total Clickthru	.0%

Microsoft VBScript runtime error '800a0006'

Overflow: 'CInt'

/aspbanner/stats_window_admin.asp, line 257

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

Things have now changed I found out godaddy has persitis aspUPload and aspjpeg as value added products, I have the aspjpeg working but have been unable to upload when using aspUPload, everything works fine with the vbscript method so I think my permissions are correct. Whenever you get a chance, any help would be appreciated.

Thanks

Mark

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

You can't unless you plan on editiing and custimizing the code.

The application is only designed to have one kind of admin and that kind has full access to the admin area.

You can of course give any user access to stats for their banners via the bannerstats page.

That is how it works. There are no other levels of admin access.

That’s about all I can tell you. It's just not something I support.

this issue has been resolved.. see following thread

http://support.cjwsoft.com/code/moreinfo316-1.htm

dsn-less is the way to go..
http://support.cjwsoft.com/code/moreinfo9-2.htm

you also need to use newer versions of the database as the odbc drivers on the server are sometimes very new and no longer work with access 97 databases

Great suggestion, routing the banner click through an intermediate page before the destination.  We use Deepmetrix LiveSTATS.xsp V7 and I should be able to configure a filter to capture the stats of the intermediate page.

Thanks for the help!
Lance

Most likely it is no longer supported on the web server. The web host probably moved you site to a windows 2003 server which does not support cdonts or they stopped running the IIS SMTP server.

You usualy wont get an error..

it is also possible that cdonts is boned up as it is pretty flaky and that tends to happen. For example sometimes the emails it is suppost to send get caught up in the smtp pickup directory and never get sent out until the server is rebooted.

You should really ask the hosting company why cdonts has stopped working. It definetly has nothing to do with the code if it has been working all that time.  If CDONTS still is supportd tell them you emails are in limbo. Ask them to look and see if a bunch of ".eml" files are stuck in the stmp pickup directly and if so to please reboot the server.

lastly:
cdonts has been deprecated and now everyone uses cdosys.
see my article
http://www.powerasp.com/content/new/sending_email_cdosys.asp

Hi,

That is not enough to go on. I need details in order to help.

It seems that if a user attempts to access a page that is not in their access level or they do not have the group permission they are redirected to the login page.  Re entering their ID generates an eror and they cannot go back to the pages they are alowed to access.  Is there a way for them to simply be blocked and return to the previous page or to a defined page so they can continue using the site?

thankyou 

And I'm the one who finds those rarities!   I'm not surprised. 

Oh well...this should be interesting trying to get an 80 year old man to change his password.

Thanks for your quick responses Chris.  This is still an awesome membership system!

Mick

Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

thanks for posting this... Since "private" is the default setting from what I read and setting it to "public" cured the issue chances are leaving it at "public" is the way to go.

http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/iissdk/html/33f2780a-eee8-4601-84b7-b489e4c756df.asp

http://www.w3schools.com/asp/prop_cachecontrol.asp

ALSO: since you are one the few people that has ever contributed anything helpful to the forums I am going to reward you with a free copy of the password expiration mod. I am sending you a PM with the download info.

Glad it worked

Wondering what might be causing a long delay to display the login screen?  This does seem to be intermittent.  Could be server/ISP related? Have experienced enough times to justify posting this question.

I can count up to 20 seconds after clicking on the link.  After login all other selections zip right along without problem.

http://gibsoncity.us/aspbanner/

Thanks, Lance

It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.