you can not limit image size using the pure code upload method. Its not possible using a pure asp method that I know of.

You would have to be using one the supported commercial upload components and edit the upload code accordinly to limit upload sizes (you would do this by looking through their documentation and samples) I didnt include any support for upload file size limitations with the supported 3rd party upload components because in my testing I found it problematic with all but aspupload from persits software. (I have example coe for that component I can provide that limits the upload size and seems to do it well) I am sure it could work with safileup and dundas as well but I gave up trying.

As for image resizing..
Image resizing requires the use of one of the supported 3rd party image resizing components. You didnt mention if you are using one or not. If you dont have one available image resizing is just not possible as asp can not do that on its own.

I have just started to move my sites to a new dedicated Windows 2003 box.  I have parent paths enabled, SSI turned on but I still can't get ../ to work with server side includes.  Everything I read online says that I need to turn on parent paths but again, they are already turned on.

The hosting company where the server is located can't tell me anything, they just say that that is the way it is with Windows 2003.  I don't buy it!

Can anyone tell me anything on this issue to help enable the ../ for serverside includes? 

The default database password is "temp"

This is noted in the docs. You can also see the current password by looking at your connection string.

yes, How can I have fixed size height and width image without distortion. Is there a component that I can use or how can I change the existing code.

yes, unless its ratio matches

how could it not be ?

Please keep questions like this in the forums... thx.
there is no need for this to be a private message

-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 2:19pm


If I choose fixed width and height is the thumbnail image going to be distorted?

-- Previous Private Message --
Sent by : cwilliams
Sent : April/29/2005 at 1:17pm

that is not possible unless you rewrite the code.

You onlyahve the two options we give in the config file for thumbnails

fixed width and height all the time

or

fixed width / dynamic height



-- Previous Private Message --
Sent by : eeye
Sent : April/29/2005 at 1:07pm

Hi William

One more questions for you. is there a way to make sure that all the thumbnails are the same size without distorting the images (in the thumbnails). Or if a picture's height is bigger than its width is there to create the thumbnail such that the height of the orginal becomes the width of the thumbnails and vice versa.

Basically I just want the thumbnail pictures to be in a perfect row with all the picture heights the same and all the pic width the same.

Thanks

Sean

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

I was able to get it all figured out.  Thanks a lot for your help, I really appreciate it.  I ended up copying the database with the password to the directory and used the user/password connection code and it works great.  I believe it was related to that but I cannot be sure.  Thanks again!

Also, I found this page which specifically talks about hidden IPN form values to change currencies

https://www.paypal.com/us/cgi-bin/webscr?cmd=p/acc/ipn-info

mc_currency	For payment IPNs, this is the currency of the payment. For non-payment subscription IPNs, this is the currency of the subscription.
	"USD"	The currency of the payment is U.S. Dollars.
	"CAD"	The currency of the payment is Canadian Dollars.
	"GBP"	The currency of the payment is Pounds Sterling.
	"EUR"	The currency of the payment is Euros.
	"JPY"	The currency of the payment is Yen.

It's not working because i guess im copying the viewstate also...and it comes up

Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.

Ok I used the following for the sql string.. is this correct?

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE (User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = '-1'" & ")"

Upgrade from V6 to v7.x with an MSACCESS DATABASE

1st of all, backup your existing ASPProtect files and database before performing this upgrade. Please be really careful while performing this upgrade. Version 7.x  is a highly advanced application compared to any previous versions. CJWSoft under no circumstances is responsible if you lose information or have website downtime.

BOTTOM LINE: (PERFORM THIS UPGRADE AT YOUR OWN RISK)

To do this upgrade you're going to need to have the Microsoft Access Application.
To work with an Access .mdb file it can not be newer than the version of Microsoft Access you are running.

That being said, on with the upgrade..

Open you're existing Acccess Database up in Microsoft Access..
You should see this something like this.



By right clicking on then choosing rename
Rename "Users" to "ASPP_Users"
Rename "Groups" to "ASPP_Groups"

If you do not have a "Groups" table do not worry about it right now.

Now right click and DELETE the Config Table.
Yes, delete it..

You should now see this. (with or without the "Groups" table)



Now, right click on "ASPP_Users" and go into design view.
It should look like this.


Rename the "Password" field to "Old_Password"
Be sure to spell it perfectly using the Underscore
It will look like this.


Now scroll down to the bottom a bit It should look like this.



Now..

If you have a "Groups" Field... leave it alone
If you do not have a "Groups" Field add one and make it a memo field.

Now, we are going to add a few more new fields.

Add a field called "Redirection_URL" make it a "text" field with 150 field size
Add a field called "PayPal_Subscriber_ID" make it a "text" field with 100 field size
Add a field called "Newsletter" and make it a yes/no field
Add a field called "Password" and make it a "text" field with 100 field size

It should now look like this.
(you do not need to worry about the field descriptions.. that part is optional and only seen when working on the database)



Now close that window and save the changes..

Your now going to open up another Access Database while still leaving the one you have on your screen open. You going to open up one of the new databases that came with v7.x. This database has some info we are simply going to copy and paste.

You'll want to open it and put it side by side on your desktop like so.
(the old database is on the left.. the new one is on the right)



Now, for the fun part.

On the new database to the right.. right click on the "ASPP_Config" table and pick "Copy"

Then move your mouse over to the old database on the left. Right click in the open white area and click "paste"

It will ask you for a database name. Type in "ASPP_Config"
Leave "Structure and Data" checked and hit OK

Your old database on the left should now have a nice new "ASPP_Config" table.

OK, now for the "ASPP_Groups" table

If you already have a "ASPP_Groups" table in your old database you are done.

If you do not have one your going to copy and paste the table from the New Database to your old database just like we just did with the "ASPP_config" table.

Your old database should now look like this.



Now, you are done upgrading your database from within Microsoft Access.

The existing passwords still have to be encrytped and moved from the "Old_Password" to the "Password" field

To that we have a special page we run in the application that will take care of that.

So, for now... go install the application, but using the database we just created.
Follow these instructions for the most part...
http://support.cjwsoft.com/forum/forum_posts.asp?TID=181& ; ;PN=1

When you get to the part where you finally get into the admin area and need to make an admin account you will notice that your existing user database is there but none of the users have passwords if you look at them in the edit screen.

That is normal. Simply do what the instructions say and create and admin account using a username that does not exist..

Then log off... then back in as that new admin account. If that works you are ready to convert the passwords.

This part is very easy.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Replacing the part in blue with your website info.

Once you get the page running you will see a login prompt and one form field just like before with the "get_me_in.asp" page

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see a page telling you to click here to encrypt the passwords and copy them over.

So do what it says... dont click more than once and wait.

Eventually it should say it is finished. So go log in to the admin area of the system using the new admin account.

Now edit some users but dont save... you want to see if the passwords are showing up. If they are the conversion worked. If you see nothing or a garbled mess it did not work and you made a mistake during this whole process.

If things went well backup and delete the conversion file below.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

You do not need it anymore.

Once you are positive every thing is running smoothly and everyone's passwords are ok you can go in and delete the "Old_Password" field as well.



If things didnt go well.. try again from scratch and go slowly.
If they still dont go well get ahold of us for help.

We are here to help, but if you really want us to we can be hired to do the conversion.

Good Morning - I getting errors in my system log that says "404 file not found" for a number of files - Here are a few examples:

/aspprotect/password_admin/ drop1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ drop2.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ left1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181

I ideas on how to fix this?  Note: The system seems to be working fine, but I want my log files as clean as possible. 

Thanks.  shirley

I am successfully using ASP protect on our site. I have one question:

The file Check_user_inc.asp looks a bit bland as I can't seem to use the sites Dreamweaver template. If I apply a template to this page, it is duplicated on other pages with this template.

How can I apply a template to this page?

Thanks

Clark

It a generic error that means something is wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

Hello,

I dont know exactly how you go about that and it would really depend on a lot of things like when the ad started and how yu wanted t handle that. it would involve custom coding though, not a change in the database.

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

so you are using the subscriptions signup directory right ?
"paypal_signup2" ?

1st.. I would check that the xml parser is working.

It is required for making the post back to paypal.
It is installed on windows 2000 and 2003 and XP by default.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=134& ; ; ; ; ; ;PN=1


Then I would check the actual form page to paypal to make sure it is generating a valid IPN url as a hidden form value.  It's the payment page you actually click on that actually takes you to paypal. For the subscription signup system that page is called "paypal1.asp"


You'll want to go through the process starting with the default.asp of the signup folder untill you get to that page. Then you want to look at the html source of that page in Internet Explorer. Your looking for something like this in the source code and you want to make sure it is valid.

<input type="hidden" name="notify_url" value=http://www.mysite.com/aspprotect/paypal_sub_signup/ipn.asp>

It also has to a url on the internet that paypals server can see. It can not be a local url for your machine. Also: If it is not valid we can try hard coding it.


If all of these things are good I'll have to take a look. I have some text file logging I can do when paypal hits your IPN url that can tell us if it is actually hitting that page like it is supposed to. And I can test the system for you by making some 1 cent payments using my own paypal account until we find out what is going wrong.

glad it is working now

sorry ya had trouble.

yes, PM me the encryption and cookie keys if you don't mind.
I can add it to my combinations that cause trouble.

it might help me to figure this problem out.

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

It appears there was a flag problem. When reading it into SQL Server, it converted the True/False in Access to 1/0 in SQL Server.

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

thats because you can not have exchange server running at the same time as the windows IIS virtual smtp server..

they clash with one another... and thats why the emails never get picked up by the iis stmp server

you have to send the emails another way like using a true remote mail server..  I am not sure but if your exchange server can do pop 3 you can probably use that that way

you may be able to change the pickup directory that cdosys uses under the virtual SMTP scenario, but I am not sure if that will work with exchange picking it up, but maybe it will work ok because you said it does when you paste them in there manually.. I do not really know.. you'd have to try it and edit the email sub routine to use that pickup path

"scripts/emailing_subs_inc.asp" is where you could try editing that path

The problem was that I did not have

ConnectionString = "Driver={Microsoft Access Driver (*.mdb)}.... in the connection string.

Thank You.

On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

Just installed software,  when I attempt to log on I get the following error (actually this is after I moved some of the include files to user).

Active Server Pages error 'ASP 0131'

Disallowed Parent Path

/gallery_admin/default.asp, line 25

The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

What do I need to do to fix?

thanks.

In addition to that I just noticed the </href> you have in there.. man that is some scary stuff you came up with.. that may appear to work and make a link but it is not correct. Each link will work but never truly be closed.

That is just not valid proper use of the anchor tag.
You make a link in html like so

<a href = "somepage.htm">somepage.htm</a>
http://www.w3schools.com/tags/tag_a.asp

Then your surrounding each link with <span lang="en-us"> </span>
Not sure why ?