do you have the smtp part of iis installed on your machine

cdonts needs that

then again I am not sure you can even use cdonts on a xp box without making some changes...

cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

It's custimization work. and just not something I can support.
Basically it is basic ASP/Database work.

Something you kind of need to figure out on your own. It's not difficult work for a good asp coder but there is no easy way and it is time comsuming.

I wouldn't use the custom fields though. I would make your own.
It's simpler that way.

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

Ok nevermind that... i got by that wasn't paying attention...

The problem is even before this which i didn't know until now.

I placed the protect tag in a page i called members.aspx

When i go to this page is says ACCESS DENIED etc etc etc.

When i go to login to view this page i get the error..which i DIDNT know because i assumed it was working. This is the error im getting:

Server Error in '/MAP' Application.

---

The resource cannot be found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable.  Please review the following URL and make sure that it is spelled correctly.

Requested URL: /map/users/aspprotectlogin.aspx

btw it says /map because that is the subfolder within the root folder

I uploaded the files designed for an aspprotect folder at the root of my site (mysite.com/aspprotect) and went to mysite.com/password_admin/get_me_in.asp and receive this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xf54 Thread 0x908 DBC 0x90c41dc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I am assuming my host has still not set rights properly and that is why I receive this error. Am I correct?

 I will definitely recommend hosting company you suggested for our businees site.

Hello,

What is the difference between the paypal_sub_signup and the paypal_signup directories?  Also, I know it depends, but what directories and files can I delete from my web server if I am not using them?  I copied the entire set of files that came with the program over to the webserver and I am concerned that there is too much out there.

Jess

No problem. I get it now.

I added a Session Variable for "Counter". Then wrote an If statement around that. When the user logs on for the first time they see a window pop, after that the normal start page.

Thanks

UPDATE... on very very busy sites these methods have been reported to fail once in a while..  meaning .NET gets overloaded and instead of a banner its shows some error code.

its not the banner system .. its the .net engine and the calling method

Hi,

1. Two months ago, we have set up to use the Subscription services exclusively for all new members and renews. and removed the regular payment service, a carry-over from v6.
2. Many from the "pre-subscription" service have yet to expire, thus have a populated expiry field.
3. With a 10 month bridge before we get all the members onto the Subscription service the "Send email to users that are soon to expire."
is used to remind these.
3. When members RENEW using the subscription service, the Expiry Field is not Nulled and they become targets for future reminders although they have renewed as Subscribers.

XYZ signed up on Nov. 05 2004, we send him a reminder in Oct 2005 and he renews as a SUBSCRIBER. His expiry date field is not nulled and he will keep getting notices although he has paid for another year.

Hope this is clearer... Thanks

It appears there was a flag problem. When reading it into SQL Server, it converted the True/False in Access to 1/0 in SQL Server.

i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

Great suggestion, routing the banner click through an intermediate page before the destination.  We use Deepmetrix LiveSTATS.xsp V7 and I should be able to configure a filter to capture the stats of the intermediate page.

Thanks for the help!
Lance

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

Okay, I did that, now I get:

Microsoft VBScript runtime error '800a004c'

Path not found

/aspprotect/password_admin/upload_post.asp, line 292

Hi all,

I have the photo gallery set up at www.kashabowieoutposts.com/gallery

It's great - love to work with it.

But I've never been able to get those with just User permissions to be able to upload... Only an administrator is successful in uploading.  This was no problem in the past, but now this client would like to give their guests a means to share their pictures on their site - so now I have to figure out the bug...

... this is the error I keep getting...

Your upload did not succeed, most likely because your browser does not support Upload via this mechanism.

Your browser must support a standard called RFC 1867. Please check with your browser vendor for support of this standard.

------- anyone else experienced this?

Many thanks all!!

Doug

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

I just told you a lot of different things to try... and I doubt you have tried them in the time since I mentioned them

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

That would be great.

I am sure you know that many virus that are sent via email have the same property. (double extension). The code can be executed even though Windows identifies them as simple text files etc.

Thanks again

The default database password is "temp"

This is noted in the docs. You can also see the current password by looking at your connection string.

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

Thanks very much for the tip. I'm a beginner with all this stuff so forgive me for the inate stupidity!

By the way, I think the system is great and I am very pleased my purchase.

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.