The count is in the album area where the small pictures and description of album.   Viewed 1 time(s)  This count never changes.

Thanks

 John

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

look in the "check_user_inc.asp" file

Thank you that did it !!

Hello,

Sorry
No, there is not.

not the way the code ships.. The program keeps tracks of everything by the way it ranames files. The system has been tested to work well with as many as 10,000 images files. Any more than that and you need something a little more serious meant for that amount of images.

You could certainly modify it do work that way if you are good with source code. There are actually as many drawbacks as doing doing it that way as there are advantages.
Take Care

I don't believe that the iframe method is supported in a .NET (aspx) implementation, is it?

JDooley

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

I have written asp.net application pages- obviously i knew what viewstate was, or else when they made a mistake on that page it would not have saved their filled in info. Same thing for after they submitted, when they hit the back button their info would be gone.

For someone who wrote this software it seems you are not able to do simple things. Im begining to think you didn't write it. The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

I know how the log boxes work. Esp. reg ASP... they all allow you to enter your username and password and then when you hit submit it gets verified and transfers you to your destination. ASP.NET has that capability also.. i didn't purchase a program to go and have to re-write it in visual studio. It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

The program seems to have some great complex features, however, your not able to incorporate this easy login from a diff. page function... fishy

if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application

how you connecting... lets see the connection string...

could be permissions related too.. if they are not set correctly
(always give them to the folder, never just the mdb file)

Some of this might help...

http://support.cjwsoft.com/code/moreinfo11-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/moreinfo56-1.htm

you may want to download some of the different versions of the access database from the support area and try connecting to them as you may have older odbc drivers on the server

You may also want to try to get ASPTest from our website working before you go any further

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

Hi there,

Just bought ASPProtect 7.0 last week and just got around to installing it. I've gotten through the installation and am now trying to test the (Forgot Password) functionality.

I get the following error when I type in the e-mail (or in some cases the username) and Post the form. 

Error was [11004] Valid name, no data record of requested type

I know that the add user functionality is pointing to the correct database (I see the additional rows via SQL Enterprise Manager) and that the e-mail address I am looking for is in the SQL database. 

Any ideas? Any other information you need?

Thanks,
Toni

I need to use SQL for other reasons than efficiency.  If I create 2-seperate databases, would there be a lot of code to edit?

Thank you.
Lance

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

basically one at a time because of limitations of the file uploads that browsers can support 

more on that here
http://www.aspphotogallery.com/pro_add_ons.asp


An Admins can however ftp a bunch of pics to the import folder and import them into any album all at once pretty easily

I wonder why the banners in ASPBanner 8.1 are moving from one place to another when opening my site www.helserevyen.no in a Mac Safari browser and click on refresh?

Can you take a look at my site and response?

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

I did all that you sugessted and all failed, you  said "I did a sign up.. your verify URL is not saved/set in the application variables. is this somthing I can change manually?  below are the steps I performed......

1 - made sure the web is it's own application in IIS

2 - Reset IIS in command promt

3 - Restarted the server, the only thing is I have not waited perhaps long enough for it to kick in. but it should have with the restart.

I am running windows 2003 on the front end with wondows 2003 and Exchange 2003 on the back end, is there anything else that may be causing this issure?

Thank you!

Matt...

There is nothing built in to the system but it is very doable.
However, you need to be a decent asp coder because your going to have to write some code.

Basically you would want to do a check on the screen where a user uploads to count how many pictures they have uploaded.

Then act accordinly and either let them or dont let them proceed.

On a side note the overall filesize limit of the total of all pictures a user can upload can be set when you edit a user.

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

Hallo,

Can I change the number of the access levels?

I want to have about 20 levels...

ASPProtect v7.x has a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customer that was using them.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

and so on... I think you should get the picture by now

It probably is. You would have to look at the paypal documentation for IPN and see what needs to be changed in the form code.

You can get all that info from PayPal's website.

There are tons of variables and options you can use with all of their code.
They have detailed PDF files full of information on all of them.

Has anyone used the aspmail function to send and recieve emails from within your forms? If so what string did you use in the aspmail_host field in the connections database.

thank you
adam

Hello -

Believe it or not I finally can access the photogallery. You were right Chris regarding the unzipping of the files.

Now onto the next challenge! I have set up three categories and proceeded to create a test album. I uploaded a couple of pictures (yeah that worked!!!) but the album does not show up on the default.asp page under the category.

Please advise -
Rhona (rookie)