Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

Hi,

I don't fully understand what you are explaining ... the part about showing a user but not working???? but if you PM me the details I will glady go into your live webserver and see if I can get it working.

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application

Hi,

I basically explained how I thought that might work here where I went over everything I could think of and suggested you download the free version and see if you could get it working
http://support.cjwsoft.com/code/moreinfo488-1.htm

The part about using the alternate scenario involving querystring info from a url.

I have never done anything like that and that is why I told you what I knew and suggested you try it with the free version...

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

I have sent an registration email (as test) to both a yahoo account and also my own email server and in both cases I get the same issue, all else is working great. I am sure its somthing simple, perhaps I am over looking somthing else. the site url is www.rochestertek.us/asp/users/register.asp if this helps

Again thanks.

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

Microsoft VBScript compilation error '800a0411'

Name redefined

/aspprotect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^

While attempting the database connection test, I receive the following error:

Server Error in '/' Application.

---

Security Exception

Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.

Exception Details: System.Security.SecurityException: Security error.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[SecurityException: Security error.] aspprotectnet.DBConnectTest.Page_Load(Object sender, EventArgs e) +0 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +2112 System.Web.UI.Page.ProcessRequest() +218 System.Web.UI.Page.ProcessRequest(HttpContext context) +18 System.Web.CallHandlerExecutionStep.System.Web.HttpApplicati on+IExecutionStep.Execute() +179 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87

I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

you summed it up perfectly... everything you said really

As for the banner software custimizations.. you could just make another folder with a modified admin area (little tweaks here and there so the person logged in only controls their own banners) You'd probably want to add an approval process so nothing they did went live unless you really really trust them. That wouldn't be that hard either.

I always planned to do it someday but I just never have time.

Yup, it probably means the virtual directory is not configured as an Application in IIS.

You did put this in a plain folder in your web, correcct ?
Not a subweb

Regarding the application settings for the virtual directory.. if it is your server you set that stuff up in the IIS console.

If hosted somewhere it is there responsibility to have that set up correctly for you and you need to contact them and ask them what the deal is.

I need to use SQL for other reasons than efficiency.  If I create 2-seperate databases, would there be a lot of code to edit?

Thank you.
Lance

basically one at a time because of limitations of the file uploads that browsers can support 

more on that here
http://www.aspphotogallery.com/pro_add_ons.asp


An Admins can however ftp a bunch of pics to the import folder and import them into any album all at once pretty easily

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

Hi,

I am using the upload_post_VBSCRIPT.asp to upload the pictures. My concern is the security of this. For instance I've seen some sites get hacked by a user uploading a file (going through the same process) and ending up crashing the entire server.

I tried adding .jpeg to the end of a text file (filename.vbs.jpeg) and then uploading it, and the file was actually uploaded. Is this a potential problem?

Thanks

S

hi,

no.., not unless you come up with some clever way to handle it on your own
http://support.cjwsoft.com/code/code_info.asp?TID=369&KW =https
read 2nd to last post

The way ASPProtect ships it is designed to either be in http:// the whole time or https:// the whole time.... (there curently is no solution from me allowing going from one to the other)

sorry

Not a problem.  Have a good time at your wedding.

thanks!

how about translating the error to english..

Looks to me off hand that it would have something to do with the SQL server itself not being run in an english lcid/format and causing some sort of date issue.

I would also suggest you start off with a brand new blank SQL ASPBanner database and make sure that works before you attemp t to import any data into it.

YES.. you need to edit your SWF file to link to the aspbanner system...

example.. the link may look something like this
http://banserver.powerasp.com/aspbanner/banner_redirect.asp? Banner_ID=60

of course you need to put in the right information for your site and whatever banner ID it is in your system

Like it says above.. if you save the new banner at least once and then come back to edit that link will be generated for you at the bottom of the edit page.

then when your flash banner is clicked on it will go track the click and then send them to the "link_url" specified for that banner when you edited it.
(you need to enter the final destination url there if you want that to work)