thanks... a review at aspin is always appretiated ...no one ever seems to do a review and they help me out a lot.. the aspprotect admin area header has a link

thanks...

If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

Yes, thats cool.. post it here for sure.

Also, the way you allowed for your search engine is clever and probably was the easiest way to go.

You could do the same thing with the IP. Much easieri than the way I was thinking of doing it.

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

Hi-

Thanks for the quick response to my previous posts.

This is my issue:

I have read over all the docs and installation instructions and can't find a way to do this:

my default page in my root dir will be a log in page which will take the user once his level is validated to a "home page". Is there a page in your examples that will perform the function of this log in page? or should I rename check_user_inc.asp as the default and change it's html output to make it look like my log in page?

I also looked within the code for check_user_inc.asp and did not see where to specify where the user will go once he signs in.

Your help is appreciated

A very common and extremely bothersome error encountered when running ASP apps that connect to a database is the "80004005" error. It comes in many varieties.

These articles cover it.


(an article I wrote)
http://www.powerasp.com/content/hintstips/permissions.asp

(more articles)
http://www.aspfaq.com/show.asp?id=2009

http://support.microsoft.com/default.aspx?scid=kb;en-us;3065 18

http://www.aspfaqs.com/aspfaqs/ShowFAQ.asp?FAQID=115

http://www.macromedia.com/support/ultradev/ts/documents/8004 005_cannot_open_unknown.htm

I have set up a user to be redirected to a different page when logging in for the first time.

I assumed this function would count the number of times a user has logged in. When the login count was greater than 1, the user would be taken to the default.asp 

This isn't happening. The user is always redirected.  The user login count in the database is now 9.

What am I missing?

That being said, ASPIN has a lot of problems with anonymous reviews so if you can please sign up with them and post an Authentic review as they carry a lot more weight. Authentic reviews involve responding to their validation email so when doing so use a real email address that you regularly check.

And sorry I made you use the forums, but as you can see this is exactly the sort of thread that will help someone else later on.. and that is why I require people to use the forums now instead of just email support. That way the conversations are out in the open where they can help everyone instead of buried in my outlook where no one will ever see them. And of course if information is sensitive you can always do a Private Message as you did earlier.

It is all about creating a knowlegebase of valuable information.

I would highly suggest setting up a DSN-LESS connection.

That system dsn is most likely the source of your trouble It is probably that or permissions are still not correct.

I can't tell you how many people have had trouble with system dsn's and finally set up a dsn-less connection and everything then worked as it should.

The location of your database is fine as long as permissions are truly set correctly like I mentioned.

Also, be sure you are setting the database type correctly in the dataconn_inc.asp file. That can cause problems as well as some people have been known to delete that line.

See my articles...

http://support.cjwsoft.com/code/moreinfo9-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

http://support.cjwsoft.com/code/code_info.asp?TID=40&KW= system+dsn

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

If you bought ASPBanner Unlimited Version 7.3 Before August/01/2004 this file needs to be updated.

It fixes a bug where CODE type banners do not work correctly with a weight higher than 1.

Basically, blank banners will rotate and you will see nothing sometimes.

Copy this file into your ASPBanner folder over the existing file of the same name.

2004-08-03_045728_appinfo_inc.zip

I have activated both activity and log files. The directories exist on my server and don't give any errors.

When I check the activity tab, some times there are a number of items in it.  Other times, there is only my login info.  From what I can see, it is supposed to show the last 50 items of activity at all times.  Am I missing something?

Also, when I click on the log file tab, there is no file or information to see.  Is there something I need to do beyond activating it in the settings area and making sure the directory has write permissions?

Thanks.

enjoy the bar.. drink one for me.. cause that was the problem..

Hi,

I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)

Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)

If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.

I'd would greatly appreciate any help with this.

Thanks,

Allison

Hi Chris,

Alright.  We figured out how to work with both C# and VB, by creating a separate VB web project in VStudio, and then passing the aspprotectnet.dll to the C# project.

Ok.  I have another question:

How can our code determine the identity and user_id of the currently logged in user:

Is it Session["User_ID"].ToString() and Session["Username"].ToString()?

thank you

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on a database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner database in the SQL Server

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

If you have an album with more than 96 pictures, the spacing in the tables can become incorrect, with pictures touching each other. (This program is not designed to handle more than 96 pictures due to server speed, but it can handle more than 96 with minor changes to the code.) Also, after 96 pictures, the pictures will not have 6 on a line, but rather 6 on a line up to 96 pictures and then the rest of the pictures on one line next to each other extending to the right of the screen endlessly. To fix this, I simply edited the ASP code using the following loop. It can be a perminent fix, because I used the maxpicsperalbum variable to define the spacing.

<%
Dim SixInterval
For SixInterval = 2 to maxpicsperalbum
 SixInterval = SixInterval + 5
%>
 <% If PicIndex = SixInterval THEN %> 
  </tr>
  <tr>
 <% End If %>
<% Next %>

Then, the following code must be commented out:

<% If PicIndex = 6 or PicIndex = 12 or PicIndex = 18 or PicIndex = 24 or PicIndex = 30 or PicIndex = 36 or PicIndex = 42 or PicIndex = 48 or PicIndex = 54 or PicIndex = 60 or PicIndex = 66 or PicIndex = 72 or PicIndex = 78 or PicIndex = 84 or PicIndex = 90 or PicIndex = 96 Then %>
 </tr>
 <tr>
<% End If %>

This code can be found in scripts/view_album_style*STYLE NUMBER*_inc.asp . (STYLE NUMBER depending on which style you are using (found in config file))

This change in code will enter a new table row after each 6th picture. You can have more or less than 6 pictures per line depending on the width of your files and preference by changing  changing the number 5 in this line of code: SixInterval = SixInterval + 5

If you have any questions, JPortnoy@Checkernet.com

check the action for the button in the code... its probably not posting back the the right page which should the same page it is...

I bet ya it is posting to guestbook2 which is the wrong directory... an old mistake I forgot to correct...

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

Hi all

User activity screen shows history of logged-in users.

Is it possible to view only those users that are currently logged in ? not the all users that have logged in previously

thanks in advance

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

If you are developing using Windows XP Pro and running the NTFS file system setting proper permissions on a folder in your website requires that you 1st disable simple file sharing.

To do so open up "my computer". At the top open up "tools/folder options"

Then the "view" tab.

Then at the bottom uncheck "use simple file sharing"

After that that is done... using "my computer" browse to the folder in your web that you need to set permissions on.

Right click on that folder and then choose the "security" tab.
(If simple file sharing is on that tab wont be there)

Give the "Internet Guest Account" Modify Permissions
This will check all the boxes under modify as well.

You can also give permissions to the everyone account and accomplish the same thing.



BTW:
If you are using ASP.NET you need to give permissions to an account called ASPNET. It wont show up in the user list. You'll need to click "add" and then type in "ASPNET"

One is for paypal subscriptions (recurring billing) and the other is for single payments

http://support.cjwsoft.com/forum/forum_posts.asp?TID=185& ; ; ;PN=1

http://support.cjwsoft.com/forum/forum_posts.asp?TID=186& ; ; ;PN=1

You can delete any of the 3rd party payment directories you are not using including the the 2checkout one... (all those folders really are is a copy of the users folder specially modified to handle a certain payment processor)

Just Don't delete the "users" folder though as there are things you do there that you can not do anywhere else..  quite a few things..  editing existing account info, looking up passwords... etc etc