If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

Now that I think about you may very well be able to use the existing login_form_inc.asp page

the header and footer files for the users area may be ok as well.

probably the smart thing to do is try your old ones and compare them to the new and see if everything you need is there. If not add it by looking at the source html and comparing.

All other files should definetly be replaced with the new.

Thanks very much for the tip. I'm a beginner with all this stuff so forgive me for the inate stupidity!

By the way, I think the system is great and I am very pleased my purchase.

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'ZŁ$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks

[QUOTE=spider]At the bottom of my "users" list page, it asks the question "number of users displayed per page"?  After hitting a larger number than the default of 1-25, it increases the number of users per page to that number.  But as soon as I leave that page, it goes back to the default.  Any thoughts?[/QUOTE]

That is how it is supposed to work. It is not supposed to remember that info after you leave. If you want it to always start at some default number simply copy the URL info after picking a number. You'll see the querystrings that tell the page what to do in the address field of your browser. Take that entire URL and  edit the button in the admin area to link to that. The links for the buttons are in the "header_inc.asp" file and you should edit that file with a text editor.

That's the easy non technical way to set a default on the users page and that applies to anything including doing a sort or whatever.

example...

you might change this

<a href="default.asp"><img src="../images/users.gif" border="0" alt="Users"></a>

to something like this

<a href="http://www.yoursite.com /aspprotect/password_admin/default.asp?SORTBY=Email+DESC& ;MyPageSize=500="><img src="../images/users.gif" border="0" alt="Users"></a>

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

OK, thanks.

Nick

Just having the database with members does not protect the page.  You need to add the appropriate code to every page you want to restrict access to.

You need to click on the Groups tab in Admin. 
Click on Generate PW protection code. 
Click on the basic button if you don't want to include levels or groups or choose a level or group(s) and click the appropriate button. 
Paste the code that's generated  into the top of an ASP page in code view.

Is that what you're looking for? 

Michelle

ok... glad ya figured it out.

Yes.. for ASP server side code to run the page extension must be ".asp". I was gonna mention that but I guess I just didnt think anyone would do that.

no offense.. not everyone works with this stuff every day..

Our home page is not showing up gives this error:

Active Server Pages error 'ASP 0126'

Include file not found

/Default.asp, line 246

The include file 'elib/articles/home_feature1.asp' was not found.

I am not entirely sure how one configures the system to assign a user to a specific group.  For example, let say I have created two groups A and B, and I have pages protected by the code generated in the admin area for groups A and B.  I know I can assign access to these groups in the admin area.  However,  it is not clear to me how I do it automatically through the registration process. 

Chris,

When I set up a test user name it does accept name and passwords and the passwords are encrypted, no problem there.

All I want to do is to restrict access to the protected pages to the members only. Only those users will be accepted and allowed to view.

I have entered all of thier names, address, phone number, email and company in the database, which is still named ASPProtect_access2002.mdb and in the fpdb directory of wwwroot. To get it there I uploaded via FTP.  I hope I expained the situation well enough.

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

An email I just received from eastcoastguy.. to keep this thread up to date

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

When I add a user, I can not activat it.

What do you have the registration type set to in the settings ?
They wont be activated automatically unless you have "automatically" selected ?

It sends me back to log on and will now allow me to log in as admin???

I am not quite sure I understand ? Seems to me like that would be normal because you can always log in as the admin at any time. If you cant log in as the user you just signed up as that could be for a couple reasons relating to the registration type you have slected in the settings. There are 3 types all epxlained in the settings screen. Some require manual activation byt the admin, some involve a registration email.. etc etc

I can restart the APP and log in as Admin, but the user I added
is still not activated??

How and why are you restarting the applicaton ? Please explain what your doing there.

My system will also not allow me to set the Stay Loged in FLag.
It just ignores it....

As I told you in an email earlier cookies must be enabled for authentication to work. You mentioned now you can not log off ? I am not sure I know what you mean by that. I assume you know to close all browser windows when testing things like this and I assume you know you have specifically log off and confim it in order to remove the remember me cookie and have to log in again when you return to the site.

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

There is nothing built in to the system but it is very doable.
However, you need to be a decent asp coder because your going to have to write some code.

Basically you would want to do a check on the screen where a user uploads to count how many pictures they have uploaded.

Then act accordinly and either let them or dont let them proceed.

On a side note the overall filesize limit of the total of all pictures a user can upload can be set when you edit a user.

More info on the groups session variable.

Session("Groups") will contain the ID numbers of whatever groups the user is a part of.
It does not store the descriptive name of that group. It will show the same data that is actually stored in the "Groups" field in the database.

for example it might hold a value like this

*2*,*5*,*9*

meaning a user is part of groups 2, 5, and 9

so if you wanted to check to see if a user was part of a particular group you would do something like this

<%
If InStr(Session("Groups"),"*9*") Then
     Response.Write("You are a member of group 9")
End If
%>


Taking this even further, if you really wanted to get a particular group's name or description you would have to query the database like so. In this case we ask it the name and description for group 9.

 Group_ID=9
 Set ConnPasswords = Server.CreateObject("ADODB.Connection")
 ConnPasswords.Open ConnectionString
 Set cmdTemp = Server.CreateObject("ADODB.Command")
 Set CmdEditGroup = Server.CreateObject("ADODB.Recordset")
 cmdTemp.CommandText = "SELECT " & tbl_label_groups & ".* FROM " & tbl_label_groups & " WHERE (Group_ID = " & Group_ID & ")"
 cmdTemp.CommandType = 1
 Set cmdTemp.ActiveConnection = ConnPasswords
 CmdEditGroup.Open cmdTemp, , 0, 1
  
 Group_Name = CmdEditGroup("Group_Name")
 Group_Desc = CmdEditGroup("Group_Desc")

humm, those are some very big images to be starting off with but I am not sure that would cause a problem under the importing scenario

what width are you having the system resize them to ?

What happens when you upload a image manually (one a t a time)

Also, try the import process out with some pictures no bigger than say 1024 and lets see what happens

Nobody ever asked me, so i guess npegley sorted it.

The solution is indeed a single line added to your button form code ..

eg :

<input type='hidden' name='return' value='http://www.your-return-url/here.asp'>

This will overwrite any settings you have in your paypal preferences.

I posted this reply for anyone stumbling on here with the same problem. Hope it helps. :)

Dave.

Ok i am having an issue with my other comp. I have spent ANOTHER 3 hours researching this one.... it WONT START THE IIS SERVICE!!!

I get this error:

The service did not respond to the start or control request in a timely fashion

ANYWAY---

I decided to use one of my client's hosts; which happens to be Network Solutions.

ANYWAY again-

I uploaded the whole thing there and they advised me they cannot do the explicit permissions on that _database folder. This is what they said: I would also would like to point out that ASP.NET applications and permissions do not extend to any other folder, other than the root, (/htdocs/), and the bin, (/htdocs/bin/) folders.  Sub-directories and folder after bin and htdocs will not have ASP.NET permission (read or write).

If you could move or reconfigure your application to save all your code behind, include and dll files onto the root or bin folder, your application could work or possibly run as you would expect.  Please have this done and retest your application. If and when you get a different problem or another error after doing so, please let us know, and we shall be happy to help you troubleshoot any problems that you may have.

There is a 'create database option'  where i can create a database..create a dsnname, user name, password and have to specify the database file name. Once i do this i need to place the database file (aspprotectnet2002.mdb) in the /db folder within the root. I also tried this and made the appropriate change in the web.config but it STILL DOES NOT WORK. I AM PULLING MY HAIROUT WHY WONT ANYTHING WORK.

ALL THE FILES ON ON THE ROOT OF THE WEB HOST. I PULLED THE FILES OUT OF THE _DATABASE FOLDER AND DUMPED THEM ON THE ROOT. I CHANGED THAT ON THE WEB.CONFIG BUT ITS STILL LOOKING FOR SOME .XML FILE IN THAT _DATABASE FOLDER.

I'VE BEEN TRYING EVERYTHING AND IT SEEMS THAT I CANT USE THIS SOFTWARE FOR THE LIFE OF ME

Flash Code Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

http://www.banmanpro.com/support/flashgenerator.asp

Chris,

I understand.  I set it to a lower number that will hopefully be a good balance for the user.  I am simply AMAZED at what your software does and I thank you for all you have done.

Jess

I'll give it a shot loading it on the laptop and publishing it, if it doesn't work I'll let you know and you can take a look at it tomorrow afternoon.  Thanks for all the help tonight...

Good luck pouring that concrete!