I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here

ACCESS DENIED

INVALID Username & Password

Username HAS EXPIRED

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

Hi Chris

I've just recently purchased ASPBanner and have been testing out serving multiple Tradedoubler code using the IFRAME method. I have four types of banner on the same page refreshing every 15 seconds. (this will change on the live site) 

I've been leaving the IE page up for x hours and coming back to find between 1-3 of the banners has stopped and in place is an "internal error".

BannerZone=3&Refresh=15|40|800a0046|Permission_denied 80

I thought it may have been the SQL permissions from one of your other messages so I gave the banner user the DataReader and DataWriter permissions.

Its still happening and around the same time in the logs theres a couple of file not found errors.

BannerZone=2&Refresh=15|23|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=4&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

BannerZone=1&Refresh=15|25|800a0035|File_not_found 80 - 80.65.240.159

Any ideas? I'm hoping its not the server as there is currently only 2 sites on it and this is pretty much the only traffic.

Thanks

Colin

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

Hi Chris,

The password is HANNAH.  If you're into trouble shooting mode and would like the key, I can send it to you.  If not, no big deal, I've email the guy a new password.  We'll see how many rounds it takes him to get it right. 

Thanks,
Mick

Encountered another issue.  When entering a user name correct but the wrong password get the following error:

Microsoft OLE DB Provider for ODBC Drivers error '80040e14'

[Microsoft][ODBC Microsoft Access Driver] Syntax error in string in query expression '(Username = 'ROBERT') AND (Password = 'ZŁ$'.

/check_user_inc.asp, line 115

Did I do something else wrong?!

Thanks

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

If I also password protect the pricelist pages then someone will have to login twice.

nobody should have to log in twice... ?

session variables keep track of access... once your in - your in and you can browse to and from any password protected pages you like

If it is making you log in each time then cookies are most likely disabled.. session variables requires cookies being on to work.. cookies being on  is a requirement of aspprotect and is how Formed Based Authentication works..

let me know if that is the issue there...

you shouldnt have to be logging in more than once per session

Thats the whole point of the application...

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

The only other thing I can think of if you are not getting any errors.

Is that you may have the path to the server include file correct but ASP server side code is not executing in that part of your web site.

You can do a simple test to tell if it is...

Make a simple ".asp" page in the same folder.

Put only this code in it.

<% Response.Write ("ASP is executing") %>

then run the page via the web browser thru the server..

If the text prints out ASP is running... if you don't see anything it is not

I have been having some display issues with the .NET version of ASPBanner.  I set the size of the image, and I set the size of the banner and there is still white space above and below the image.  I am not using a text link below the banner, so I have it set to blank.

Here is a link to my page. 

http://www.nababaseball.com

Two of the three banners in the rotation on the main page have non-white backgrounds so it's easy to see the issue I'm talking about.

Is there a way to tighten up the formatting so that the image fits onto the page in the size specified?

JDooley

Christopher

Many Thanks

Seems like its working just got to test it bit to see, though it wasnt going to work as I had one too many End If's after the last part of the code you done for me. But even I eventually sussed it, nothing to do with your bit just another mistake on my part

Great to get support like this especially on a Saturday

regards

John

I noticed that is grabbing the wrong URL for some reason. Even when i mouse over the URL its somehow getting the users sub directory. How.. i dont know... when i erase that users in the url it works perfectly.

I am looking at the code in the .vb file and i dont see anything that could be causing it to do that... but then again i am no programmer LOL

Its obviously kicking in that users subdirectory somehow... what are your thoughts?

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

[/QUOTE]

The relay error is because when you send emails outside your email domain smtp authentication is required.

I suggest trying to use CDOSYS with the smtp authentication option. CDOSYS is on all servers by default and is really the way to go. Use a real email account and password to send the emails through the server.  Be sure to check smtp authentication for cdosys and to specify all that info for your email account and password in the settings screen.

If you want to know about CDOSYS read my article.
http://www.powerasp.com/content/new/sending_email_cdosys.asp

I have noticed that during the file import, that some of the pictures get messed up.  I can import aroun 150 pictures into different albums, say 3 albums with 50 each.

I have noticed however that some of the get messed up.  What is happening is...the thumbnail will be correct, but after you click it the picture that shows up is one form a different album.

Any cure for this?

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

Hello,

I do not really understand what you mean?
There are no country and city lists in ASPClassifieds.

It really means just what it says. Your connection string is just not valid and the sql server speicifed can not be reached. The username and password could also be invalid. Since you already had a database set up you should use the same username and password you have always been using. You also need to use the same database name you have always been using. Without actually knowing more and seeing what you are doing it is pretty hard to tell you anymore than that.

The directions and sql scripts given are for setting up a new sql database. Applying them to an existing sql database requires a slightly different approach. Modificiations to the SQL scripts elimintating references to the usernames/password/database we suggest in the scripts is also a good idea.

A data connection is a low level as it gets. Until you get that working you are really not even touching any of the code in the ASPListings application.

If you want I have no problem going into your sql server and web and setting up for you correctly.

The application automatically generates all the code for you for each method of calling banners. It does this on the zones screen.

If you are using flash it also possible that the actualy flash file is what is causing things to slow up.

It really all depends... it could also be server resource related

using sql server or access.. ? etc etc

all important details

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

I am using ASPProtect's password program, which has been very successful, for managing over 1,500 military veterans' memberships at http://www.vspa.com.  What I am trying to do now is utilize the "Groups" code, as generated by the Admin page, to prevent members with expired accounts (and non-members) from accessing restricted "members only" .ASP pages they may have bookmarked, or found via web search. The code generated and used is as follows:

<%@ LANGUAGE="VBSCRIPT" %>
<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * ADMIN * Member Current * Member Life * Officer/Staff * ) -->
<% GROUPACCESS = "10,12,14,19" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<!-- End ASPProtect Code -->

The above is placed over the <html><head> statements on the page.

When I am logged in the code works perfectly! When I log off and try the URL again, the page appears in its entirety but with a Login box for Username and Login Password at the top of the page. You may view the problem at: http://www.vspa.com/aspprotect/vspa-password-enter.asp .

What I would like to have happen is expired members and non-members would be sent (or Redirected) to a Login page. I do not want the Login password box to merely be inserted above the page that I am trying to keep them from visiting.

Don Poss,
VSPA Webmaster

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

I guess i am not being clear as to what i am trying to do. As far as the event thing... lets hold off on that for now. It seems Chris has answered my question and i am on my own for that one...

As far as the log in goes: I went to that site you mentioned;www.CafePress.com to see if they had what i was talking about. and they do. Notice on the bottom of the page it says "sign in to your account"

I want that option on my home page where users can sign in to go to their account. It will either take them to a page where they can update their info, or it will take them to a protected page. Pretty much instead of posting a link on the site to say... click here to go to members.aspx and have it return an "access denied" the user can enter their info from the main page and be automatically re-directed to that members.aspx page.

I know how the viewstate works and i also know what that returnURL thing does..pretty self-explanitory.

Hopefully that makes things easier. I just want a user to log in from the homepage and be redirected to either a protected page or their account page...

(as does that cafepress website)

enjoy the bar.. drink one for me.. cause that was the problem..

well, I need more details..

you got SQL server or data connection issues is pretty much the bottom line

If I remember right we went down this road with a SQL setup quite a while back (auguest 2005) and that never really got resolved

here it is
http://support.cjwsoft.com/code/code_info.asp?TID=321&KW =yiak

hi,

no.., not unless you come up with some clever way to handle it on your own
http://support.cjwsoft.com/code/code_info.asp?TID=369&KW =https
read 2nd to last post

The way ASPProtect ships it is designed to either be in http:// the whole time or https:// the whole time.... (there curently is no solution from me allowing going from one to the other)

sorry

Is there a way to know if it is a SQL server with IIS5? My database type is MSACCESS.

Thanks!
Rhona (rookie)