If you are using an ACCESS Database try to avoid using a system DSN. They are much slower because they go through ODBC which then uses the Jet Drivers to access the database. They also have to do a registry lookup.

ttp://www.4guysfromrolla.com/webtech/070399-1.shtml

http://www.powerasp.com/content/database/dsn_vs_dnsless.asp



It's funny because in the 4guys article they ask the question..

"Hmmmm... so who was right, Microsoft or Wrox?"

I'll tell you who was right and who said it 1st.  It was me and I said it on my old powerasp.com site before anyone else ever did.

I found it out on my own by experimenting when I was the Systems Analyst for an large ISP. We we had web servers that were not running well. I didn't read about this solution anywhere because no one was talking about it at the time. Microsoft said use System DSN's so everyone just took their word for it.

I took a lot of heat for saying that back in the day but over time everyone started saying it.

Sorry, there is not any documentation on that.. it is basic asp/database work and customization like that is not supported. I recommended looking at what is already there and using that as a guide to produce more fields. etc etc

Parent Paths ?

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

Here is what I have in settings.

ServerSoftware	Microsoft-IIS/6.0
ServerName	www.107threnegades.com
ServerProtocol	HTTP/1.1
PathInfo	/gallery/gallery_admin
PathTranslated	d:\hosting\arisky1\gallery\gallery_admin
FILE SYSTEM OBJECT	Installed
ADODB (ActiveX Data Object)	Version: 1.2 Installed
CDONTS	Version: 2.80 Installed
SMTPMail	Not Installed
JMail	Not Installed
AspEmail	Not Installed
AspMail	Not Installed
SAFILEUP	Not Installed
Dundas Upload	Not Installed
ASPImage	Not Installed
AspJpeg	Version: 1.4.0.1 Installed
ImgWriter	Not Installed
Script Engine
Type	VBScript
Version	5.6
Build	8515

I do not even see ASPUpload listed but when I run the test_asp_components.asp from the extras/more_component_info folder, it shows that it is installed.

67	Upload	Installed	COM Details	Persits - ASPUpload
68	Image	Installed	COM Details	Persits - AspJpeg

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

It does not matter what directory name the ASPProtect files and folders are in but you cant go moving around critical file and folders like it appears you did nor is there any reason to.

All that is is saying is that the users folder, the password_admin folder, the scripts folder, the check_user_inc.asp file, and all the other files and folders that come with the system can be in any directory name as a whole.... but that doesn't mean you can go messing around with the files and folders in that directory.

I assure you 100's of users do not use "aspprotect" as the main folder name and they have no issues doing so.

Regardless, you need to explain in much clearer detail exactly what you did and what paths you used and what is where.  At this point I really do not know what is you did as your post was not clear to me.

You should also check that you have entered correct path info in the admin settings page area. The register page is one of the paths that geths set there.

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

Hi there, I am not exactly what you mean when you say "moved some of the include files to user"

are you saying you are moving files around ? I am not sure what you mean there.

but.. the parent path issue is described in detail here

http://support.cjwsoft.com/code/moreinfo5-1.htm


Having is enabled is actually a requirment of the photo gallery application as stated on the web site
http://www.aspphotogallery.com/aspgallery_pro.asp

You can certainly still use the apllication but as that article says you will need to change any file includes to virtual includes so they will work with parent paths disabled

Good Morning - I getting errors in my system log that says "404 file not found" for a number of files - Here are a few examples:

/aspprotect/password_admin/ drop1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ drop2.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ left1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181

I ideas on how to fix this?  Note: The system seems to be working fine, but I want my log files as clean as possible. 

Thanks.  shirley

it might also be a good idea for you to try a simple text file writing example like this on your server and see if it hangs as well

http://www.devasp.com/samples/writetofile.asp

for troubleshooting sake

this is sounding more and more like the filesystem object is blocked or disabled on your server

It probably is. You would have to look at the paypal documentation for IPN and see what needs to be changed in the form code.

You can get all that info from PayPal's website.

There are tons of variables and options you can use with all of their code.
They have detailed PDF files full of information on all of them.

Chris:

I just got done trying it myself and it worked great for me too. I was aware of the security issue, but I'd already planned on using SSL for this particular call, as well as for the secured pages accessed through the normal process, so the bad guys will be kept at bay.

Thanks for the help.

Hello,

I dont know exactly how you go about that and it would really depend on a lot of things like when the ad started and how yu wanted t handle that. it would involve custom coding though, not a change in the database.

I have tried everything to get your CJWSoft code working..I purchased the auto listings software and I am stumped, and actually you stumped my hosting provider, my database is stored in the database directory on the root.

I have even tried your ASPtest and still cannot connect.  My have connected other databases without an issue on this same host, I have named a DNS Auto for my database and ponted to that in my code  but get the following error you see at http://www.burkesauto.com and even when i try you test script found here at http://www.burkesauto.com/asptest.asp .

CJWSoft offers a mutually beneficial partnership program for resellers of our Active Server Pages Based Web applications.

The program is very simple.

• You offer our products to your customer's as Ready-to-Run Web Site Applications.
• We sell your company our software at a 50% discount allowing you to re-sell if for the same price we sell it for or slightly higher.
• Your company installs the application in the customer's web site and configures it for the customer.
• Your company is in charge of installation support and general usage issues. We handle other more complex issues as usual.

Each time a customer purchases an application from you, you are required to purchase a license from us.
These must be purchased online via PayPal. You will be give a special password protected URL where these purchases can be made. You are in charge of setting up a system for your customers to purchase the software from you. You are also responsible for purchasing a license from us within 7 days of a license being purchased from you.

Below are the applications currently eligible for the program.
They have been chosen because of their popularity and reliability.
You must resell all three applications below.
The details and pricing of this program may change at any time.

	ASPBanner Standard sells for 99.95 (You pay 49.95) ASPBanner Standard is a high end Banner Rotation system. Web Based Administration for managing the users and banners in the database. Advertisers can monitor online statistical reports via their web browsers.
	ASPProtect Version 6 with Option Pack sells for 99.95 (You pay 49.95) Easily Password Protect any ".asp" page within your web site.  Easily integrates with your current website or project design. Web Based Administration for managing the users in the database.
	ASP Photo Gallery Pro sells for 49.95 (You pay 24.95) ASP Photo Gallery allows anyone to have their very own online photo album. Upload an unlimited amount of albums. Set up categories however you like. Allow others to upload photos. Optional image resizing and thumbnail creation.

We are looking for Web Hosting Companies and ISP's who can sell an average of 2 applications per month.
If you are not a serious company with a professionally done website you need not apply.
We are not looking for mom & pop operations.

To be very clear:
We are looking for experienced ASP Development/Hosting Companies that are serious about being a reseller and ready to go.
We need knowledgeable resellers that are experienced with ASP and will be able to install the application for the customers and handle some of the general installation issues that may come up.

To qualify for the program:

Please send us a brief overview of your company, Website URL, and your expectations for the program. After looking over your information we will get back to you with a response.

Contact us

Additional Info:

Our applications run on NT based servers only with true Microsoft ASP support. They do not run under Chilisoft. Our applications are licensed per website. That means one running installation of the database and scripts. Qualified resellers will be reviewed every quarter to see if they are meeting the 2 application per month quota.

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If

you can not limit image size using the pure code upload method. Its not possible using a pure asp method that I know of.

You would have to be using one the supported commercial upload components and edit the upload code accordinly to limit upload sizes (you would do this by looking through their documentation and samples) I didnt include any support for upload file size limitations with the supported 3rd party upload components because in my testing I found it problematic with all but aspupload from persits software. (I have example coe for that component I can provide that limits the upload size and seems to do it well) I am sure it could work with safileup and dundas as well but I gave up trying.

As for image resizing..
Image resizing requires the use of one of the supported 3rd party image resizing components. You didnt mention if you are using one or not. If you dont have one available image resizing is just not possible as asp can not do that on its own.

Hi there,

Just bought ASPProtect 7.0 last week and just got around to installing it. I've gotten through the installation and am now trying to test the (Forgot Password) functionality.

I get the following error when I type in the e-mail (or in some cases the username) and Post the form. 

Error was [11004] Valid name, no data record of requested type

I know that the add user functionality is pointing to the correct database (I see the additional rows via SQL Enterprise Manager) and that the e-mail address I am looking for is in the SQL database. 

Any ideas? Any other information you need?

Thanks,
Toni

Hello-

I'd like to set up the system to redirect to a landing page (say home1) after the user logs in.

I have looked at all the documentation and can't find something that explains how to do this. I am thinking that I can set up a log in as the default in my root directory that will have a form with an action=check_user_inc.asp. I have looked at the code there but cannot find a place where I would place a redirect to home1.

Help please

Thanks

When using the ASPProtect admin panel. My firewall software is going crazy or Blocking it on the Mass E-Mail, Newsletter, and other pages.

Here are some of the messages:

[Unauthorized Access Attempt] This signatures detects an attempt by a web server to deliver a malicious HTML page to a browser client, in an

[Suspicious Activity] This signature detects HTML documents attempting to spoof a link destination in the browser's status bar.

I am using Black Ice...

Will users also get this kind of activity from the pages ??? Or is it only because of using the Admin Interface of the software ???

Thanks

hi,

no.., not unless you come up with some clever way to handle it on your own
http://support.cjwsoft.com/code/code_info.asp?TID=369&KW =https
read 2nd to last post

The way ASPProtect ships it is designed to either be in http:// the whole time or https:// the whole time.... (there curently is no solution from me allowing going from one to the other)

sorry

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

Great software.

How easy would it be to copy the email address entered at registration directly into the login id field so that the user's email address is automatically used as the login id? 

Also, where in the code can I turn off the random password generator - I'd rather force people to pick something they can remember themselves.

Thanks,

Nick

Is there a way to upload photos to individual user directories? I don't want all the picture files in a single directory.

Thanks,

Steve

I dont know. Perhaps a fresh installation in a new folder would be a good idea as well if possible..

for troubleshooting sake..

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.

Is there a way to set various members to upload a limit of photos. So, one member can only upload 5 photos in 1 album and another can upload 30 photos in 2 albums. Even if you just set a permission for the number of uploads for each member.

Thank you

Parent paths being enabled on the server is a requirement of the application. That error means just what it says.

you can change all the server side includes to virtual includes that will work or you can ask you host to enable parent paths.. those are the options

more here...
http://support.cjwsoft.com/code/moreinfo5-1.htm