If they changed the paths they moved the site.

That means permissions for the database folder must be set again.

If permissions are not set and you are not using the correct new path info then you will still get errors.

Those errors the server reports back and quite generic and do no mean exactly what they say. They just mean everything is not perfect.

And everything just has to be perfect..

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

I recently upgraded my ASPclassifieds from MS Access to SQL.  The application launches, I can browse existing catagories, etc. but when I try clicking on the login, guestbook, register or accessing the classifieds_admin,  I get the HTTP 500 - Internal server error.  Guessing this must be a folder or file permission issue?  Have tried changing IUSR permissions but nothing helps.

Please advise.
Thanks, lancem

If you bought ASPBanner Unlimited Version 7.3 Before August/01/2004 this file needs to be updated.

It fixes a bug where CODE type banners do not work correctly with a weight higher than 1.

Basically, blank banners will rotate and you will see nothing sometimes.

Copy this file into your ASPBanner folder over the existing file of the same name.

2004-08-03_045728_appinfo_inc.zip

I am brought to a logon page in which I cannot access the page.  This must be due to the check_user_inc.asp include.  Without the include I get a blank page.

Ok i was wanting to know what the "if then" statement would be if i wanted to show xxx if your group is xxx.

I tried

    <% If Session("Groups") = "1" then%>
    <font size="2">TEXT HERE</font>
    <%end if%>

But that did not seem to work.

I assume that if I am using this product, search engines such as Google cannot access and index my content. Can somebody confirm that; I want to be 100% sure.

In case it matters, I am using a basic, cheap ISP setup where my site is on a shared server.

Thanks in advance.

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

Hello,

Again, enspecified error are not very helpful.
An error usually tells you at least a line number and page or something.

Please read this as it might help do tell me more.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

As for only happening once in a while. It could be a lot of things.

Version being used (when did you purchase.. what name/email was it under and I can look) ?
What banner method being used?
Access or MSSQL ?
How busy the site is ?
Server Resources ?

Sounds great, Sold!

Thanks Christopher!

You should not have single quotes around the "-1" because Album_Active is not a string field in the database. It's true/false or bit field in the database depending on the database you are using (MSSQL or ACCESS)

I'd do it a little more like this I think.

SELECT COUNT(Album_ID) AS Alb_Count FROM " & tbl_label_albums & " WHERE User_ID = " & CmdListUsers("User_ID") & " AND Album_Active = 1"

I took out the parentheses as well since I dont believe they are needed in a simple case like this

but is hard to say unless your the one testing it... my version might have a mistake as I am a little rusty with my SQL at the moment

also: in case your wondering...
depending on the situation and the odbc drivers the 1 and -1 should work either way but sometimes it's picky and you have to do it one way or the other

This issue came up once before and when I investigated I could find no error in the html that aspprotect generates and those files do exist where they are supposed to. We concluded it was a parsing error from the log file system.

There just really isn't anything I can do about it. I spent a week trying to figure it out. It is just the log parser screwing up under certain circumstances where there is no reason anything is wrong. They have trouble dealing with some of the complex URL/querystrings that the ASPProtect admin area uses. They think there is a 404 eror when there isn't... etc etc

I am still a little confused... one thing I would like to mention is that the passwords in the aspprotect database are encrypted... meaning you cant just add a password to the user database by hand because it wont be the encrypted value and wont work.

It is something the application takes care of when you add a user via the web based interface.

You can however still add users manaully or with careful import/exporting... but you will have to use the existing password conversion technique which is covered at the end of our upgrade instructions in these forums.
http://support.cjwsoft.com/code/moreinfo174-1.htm

Basically you want to add a field to the "ASPP_Users" table called "Old_Password" and that is where you enter the password in plain text. Then after you are finished adding users to the database manually you do this.

You want to run a special page via the browser.

http://www.mysite.com/password_admin/convert_to_encrypted.asp

Which will convert the passwords to the encrypted value for you.
See the bottom of this thread for all the info on that.
http://support.cjwsoft.com/code/moreinfo174-1.htm

The random password is generated during signup and the function that creates it is located on this page of code.

users/register.asp

it looks like this

Function RndStr(Length, UseChrs)
 If IsNull(UseChrs) OR (UseChrs = "") Then UseChrs = "0123456789abcdefghijklmnopqrstuvwxyz!@#$%^&*()_+=-"
 NewStr = ""
 Randomize(CByte(Left(Right(Time(),5),2)))
 For gpIndex = 1 To Length
  NewStr = NewStr & Mid(UseChrs, Int((Len(UseChrs)) * Rnd + 1), 1)
 Next
 RndStr = NewStr
End Function

For example go to this page and hit refresh and watch the password change.

http://www.aspprotect.com/demo2/users/register.asp

Yes, sometimes if you hit refresh quickly over and over you'll get the same password, but not generally. Also that is not something that would happen normally as a user isnt going to sit at that screen and hit refresh over and over.

Anyway... when signing up the new user of course has the option to change that password to something they would like better...

As far as... "selecting the same user name and password every time"

I need more information. That does not make sense for a lot of reasons.

Most importantly because usernames are not generated. The are inputed by the user during signup. They are then checked to ensure they do not already exist before the user is allowed to complete their signup.

So under normal circumstances there can never be duplicate usernames in the system or even users with duplicate emails as that is checked as well.

Now of course if you edited the code in any way it is possible all this is not working correctly ?

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

yeah.. I cant say for sure.. as I have never really tried to get it working in xp pro.

Last time I actually used cdonts locally was on a 2000 box

I would do a google search on xp pro, smtp service, and cdonts and let us know what you find out.

All of our apps can use free 3rd part emailing components as well so maybe try some of those. Course you need a valid email server to connect to.

Sorry, there is not any documentation on that.. it is basic asp/database work and customization like that is not supported. I recommended looking at what is already there and using that as a guide to produce more fields. etc etc

that wont work the way you did it because groups are not stored like like.

groups are stored "*1*"
or "*1*,*9,*"

so if you test for them you must do so using the InStr function of vbscript

example:

If InStr(Session("Groups"),"*1*") Then
    ' do whatever
End If

also.. as for the session variable
it should be    Session("Groups")

And in Version 6.... (its all ready to go in version 7) that session variable must be saved in the check_user_inc.asp file near where all the others are saved. If it is not there by default "I dont remember if it is or not" you have to add it like so near where all the others are saved

Session("Groups") = CmdCheckUser("Groups")

If you are wondering if it is being saved correctly you can always response.write out the Session("Groups") to see if it holds a value

the sql databse is the same.. the sql script is the same for any version

as the site says they are essentially the same app with very minor changes... if you are trying to share the same sql database with both it's not gonna happen because the table names are the same

truthfully:
that app runs nealry as well with msaccess as it does with sql so I wouldnt get too excited about running it withe sql. You will not see any benefits unless you have a ton of simultaneus (sp) users.

When using this code:

<!------- ASPBanner Ad code ------------->
<script language="JavaScript"> var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.poconocommuter.com/aspbanner/injectbanner.asp?Ban nerZone=6&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script& gt;
<!--------- End ASPBanner Ad code --------------->

I receive an error that jscode is undefined. The banner will not display.

Any ideas how to fix this?

when I go to that url is seems fairly fast and somewhat normal.. even when I try to log in it pops right back up asking for login info again..

I would check to make sure you are not running anything that might be effecting your web browsing.. software firewalls.. ad blockers.. script blockers... norton internet security.. zone alarm... anything like that

they can all effect a lot of things regarding how web browsers act.

Hi Chris,

I have a small problem, I have installed asp photo gallery pro on a hosted site, and after eventually getting them to modify permissions on directories it is essentially working, except that it won't delete pictures from an album. If I delete an album the pictures are left in the pictures directory, but the album is no longer displayed. If I then make a new album it is labelled incrementally... ie I had one album "album_ID_1", deleted it created a new album it is labelled "album_ID_2". I would have thought that the new album would be called "album_ID_1" ie taking the place of the deleted one. It seems to me that the delete album function isn't fully working either. My hosting comppany swears that the permissions on the pictures directory are set to full access for everybody. What have I done wrong?

Thank you

Nigel

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properly.

The way to cure it is as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

If this happens a lot it is a server issue, not ASPBanner's fault.

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

Hello,

I really need more infomation..

for starters

what is the server ? iis4,5, or 6 ?

what is the version of aspbanner.. aspbanner standard or aspbanner unlimited ?

what was the error message before you removed the "on error resume next"

was the sql database created using the sql creation scripts we provide as that is VERY important.

and lastly what are the the regional settings of the server ?
what is the date format ?

An email I just received from eastcoastguy.. to keep this thread up to date

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

I wonder what that ENDSQLMail send failure is all about ?
I dont use anything regarding SQLMAIL in the ASPProtect code.

I think I might need to go in so I can debug a bit. Everything seems to work fine with a SQL installation here so I just don't know at the moment.

If that is ok with you I would need ftp access or something so I can trry a few things and hopefully figure it out. Admin access to the aspprotect admin area as well so I can see what you have set up in there.

PM me with that info if you want me to take a look.

I did everything mentioned here but it do not work ;(

maybe this is the issue...

do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.

Perhaps what you named Group 1 is really group ID 3

You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..



You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc

in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp

and do that in between any user you log in as

I was actually able to do similar thing by allowing our dedicated search engine to access the site unchallanged.

<%
If Trim(Left(Request.ServerVariables("HTTP_USER_AGENT"),11)) = "MYPASSWORD" Then  
 SearchFlag = True
End If
 
If SearchFlag <> True Then
If Session("Access_Level") > CHECKFOR or Session("Access_Level") = "" Then 
%>
<!--#include virtual="/Auth/check_user_Code.asp" -->
<head>
<title>My Title</title>

</head>

<body>

My Protected stuff here

</body>

</html>

For this to work, the search engine must pass the PW to the web site. I just was not sure how to do the same thing with IPs. I will play with the code and see what happens. If it works, I will post it here to help others, if this is OK with forum rules.

Thanks,

Mo

[/QUOTE]

I just added couple of lines and it works fine

If (Request.ServerVariables("REMOTE_ADDR")) = "xxx.xx.xxx.xxx" Then 
 ' Session("PasswordAccess") = "Yes"
 SearchFlag = true
End If