humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Thank you so much that works great.

I will test with the other settings on the email server again thanks for the advice,

best regards

ok.. the count your talking about wont increment until someone other than you views the page.

After that you can increment it one time...

It keeps track of the last IP that hit it.. if it is the same it doesn't increment

This is all by design...  so the same person doesn't increment the count over and over..

It's simplitist and it can be tricked... but it does what it needs to do 

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

Anyway,

How busy your site is actually won't be the only factor. Really the application should not restart unless something happens. If the IIS application is reseting alot it could very well be the ISP restarting the server or doing IISRESETS as well or other sites on the server causing the application pools to restart.. etc etc etc  Quality ASP hosting is important. Regardless your hosting company most likely will not admit to anything be out of the ordinary.

As far as that directory deleting itself on you.. I doubt they will have an answer for that one. All I can tell for sure is I didn't put any code to delete it in there.

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

I wonder why the banners in ASPBanner 8.1 are moving from one place to another when opening my site www.helserevyen.no in a Mac Safari browser and click on refresh?

Can you take a look at my site and response?

Hi Chris:

Is there a way I can include the username and password in the URL of a protected page to gain access to a that page without going through the log-in page?

I'm not quite sure what the syntax would be in the URL.

Warren

this could go on forever...

if you want PM "private message" me info to log into your site.. show me the pages we are dealing with...

and I will take a look at it all...

CJW

I'll try to help when I get back tues night,, see the contact page for info on where I am
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john

Hello..

I actually noticed something was up with your install earlier...
(I saw you in my log files when you clicked to cjwoft from the docs)

I need more info... like what uploading method your using.. what image resizing component, what widths yoru resizing things to... etc

have you tried it while telling it to delete the pics and also while not telling it not to delete them from the import folder

I might have to take a look tommoro as well to really figure it if that is ok

I have to go the bar to meet some friends so I wont be of much more help tonight :)

I been working steady all week and need a few.

CJW

ASPProtect v7 comes with working example code of protecting an image from being downloaded and also protects the true file location of the image on your server..

This comes with the system as an example folder with some files in it.

Basically we protect the image in 2 ways.

All in all this is should be very effective protection. Yes, there are still ways to get the images like doing screen captures, but this will ensure that people viewing images are logged in to your site. This will in most cases keep them from right clicking and saving the images. This will ensure that people can not tell other people the image's url location and it will ensure other sites can not leach your images and bandwidth.

For the image protection examples to work you may need to edit some values
in the stream_pic.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "image file name" from the call_pic.asp file which is an example of how you protect a page with javascript and call a streamed image using an image tag.

Lasty, here is a great article I found on image protection and some of the things you can do about it and some of things you cannot.

http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID =41

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/default.asp, line 287

I'm doing an upgrade from an OOOOOOOOOOLD version (not sure if it was 6 or not) and it read my database OK prior to adding a new user. Now I get this error message. I was able to run the password encryption function OK, but I still get this error when I try to view the password_admin stuff. I can log in via the "get_me_in" asp page just fine, but I get the above error.

If I try to log in with my admin account, I get

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/check_admin_inc.asp, line 166

*****

OK, my question is this... if I retype all the info from the old DB into a brand new one, never before used, that would work, right? I only have 108 users, so that's about an hour of work. Or is there a 5-minute fix that I can try? I've done some messing around that got nowhere and returned all edited files to their original state, with the exceptions of the ones calling the DB location.

I'll start the C&P process and await your reply...

On a side note, I really love the new format and am excited about the new features. I'm not married to upgrading the DB and if copy and paste is faster (I just need first name, last name, username, password, email, and expiration date), then I'm using v.7 that much faster.

Connecting user is dbo of database.

User_ID is primary key with auto increment identity.

SQL Script of current table:
CREATE TABLE [dbo].[Security_Users] (
 [User_ID] [int] IDENTITY (1, 1) NOT NULL ,
 [First_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Last_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Company_Name] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Username] [nvarchar] (75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Password] [nvarchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Access_Level] [nvarchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Notes] [nvarchar] (1000) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Admin] [bit] NOT NULL ,
 [Active] [bit] NOT NULL ,
 [Expiration_Date] [smalldatetime] NULL ,
 [Email] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Address] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [City] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [State_Province] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Zipcode_Postal_Code] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Phone] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Counter] [int] NULL ,
 [Last_Access] [smalldatetime] NULL ,
 [Login_Limit] [int] NULL ,
 [Custom1] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom2] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom3] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom4] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom5] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Custom6] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [ValidateEmailCode] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
 [Date_Created] [datetime] NULL ,
 [Validated] [bit] NOT NULL
) ON [PRIMARY]
GO

ALTER TABLE [dbo].[Security_Users] WITH NOCHECK ADD
 CONSTRAINT [PK_Security_Users] PRIMARY KEY  CLUSTERED
 (
  [User_ID]
 )  ON [PRIMARY]
GO

Good Morning, any suggestions on how to best "fake out the system" -- I would like to try to keep this clean so I can see the real errors?

My thought was to try to just move those .gif files to the directory that it thinks it should be in -- do you have any better suggestions? Or reasons why I really wouldnt want to do that?

Hi,

I don't fully understand what you are explaining ... the part about showing a user but not working???? but if you PM me the details I will glady go into your live webserver and see if I can get it working.

one thing to note... the time period we are talking about is going to to be whatever you have the session timeout set at in the settings.

perhaps making that value lower like 10 minutes is an option for you.. and might help to deal with situation

Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

sorry.. you just said above you were using XP SP2 so that is the article I referred you to as I just assumed you were talking about your local web server

here is my article on permissions regarding server 2003
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

I can look at your installation monday if you like. In about an hour I leave for a wedding thingie and I wont be around again untill monday around noon

Try the uploading using VBSCRIPT method just for the heck of it. Perhaps there is an issue with the installation of the dundas component.

CJW

That’s about all I can tell you. It's just not something I support.

Hello,

I have ASPprotect 7 installed on my remote server.  I am able to go to the examples/default.asp page and login in without any difficulties.  If I copy the code from that page and paste it in a new page called the same thing but in a different folder, I get this error;  (Keep in mind that this is essentially the same exact page in a different location of the website)

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file '../../check_user_inc.asp' was not found.
/aspprotect/Pages/default.asp, line 3

I get the same error if I paste the "protection code" I have generated into the top of a current (.asp) page in my site.

Basically, the only pages that work are the ones that came with the program as examples.  Thats great, but now I need to make it work for my pages.  Any thoughts?

I recently upgraded my ASPclassifieds from MS Access to SQL.  The application launches, I can browse existing catagories, etc. but when I try clicking on the login, guestbook, register or accessing the classifieds_admin,  I get the HTTP 500 - Internal server error.  Guessing this must be a folder or file permission issue?  Have tried changing IUSR permissions but nothing helps.

Please advise.
Thanks, lancem

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

Sounds great, Sold!

Thanks Christopher!

This isn't going to help you much but here is the deal.

The 2checkout support in ASPProtect actually is not supposed to work with 2checkout subscriptions and therefore does not need to use an item number.

It is intended to be used for single payments only with 2checkout as explained in this thread.
http://support.cjwsoft.com/code/moreinfo212-1.htm

Single payments with 2checkout use their shopping cart which allows for dynamic payments without needing an item number.

I agree with you that 2checkout's interface is confusing. It's actually about the worst system I have ever seen. I could not make a 2Checkout subscription system because their system is just too limited and I couldn't make it work the way it really needed to.

Thanks.

Nick

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

[/QUOTE]

Like I said no guarantee... I have a lot of things going on... it might not even be finished till the end of July... customers will always be able to get it for the difference in price

You have the version listed on the site when you purchassed it.
Version 3.0

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

Hi, I haven't heard anything from you.

Has this issue been resolved ?

Thanks

the menu file.. "menu.asp" or something... just follow the logic of the code to find things like that. Look for server side include files and what not in the source code.

This is a good article on figuring out what pages to edit as well as other things.
http://www.powerasp.com/content/hintstips/common_sense.asp

If it was working and you changed code you could have possible messed up how all of that works... you may need to revert back and be really careful as you make changes testing every step of the way.

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.