Blog Entry: 3/25/2006 4:25:07 PM
I have sent an registration email (as test) to both a yahoo account and also my own email server and in both cases I get the same issue, all else is working great. I am sure its somthing simple, perhaps I am over looking somthing else. the site url is www.rochestertek.us/asp/users/register.asp if this helps
Again thanks.
, Christopher,
Thanks for the reply. I think I've found my problem, but can't test until later in the evening as it is on a live site.
Darrell
,
Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1
That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.
using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances
http://www.orbit.org/replace/
cwilliams38420.4424537037, Most likely it is no longer supported on the web server. The web host probably moved you site to a windows 2003 server which does not support cdonts or they stopped running the IIS SMTP server.
You usualy wont get an error..
it is also possible that cdonts is boned up as it is pretty flaky and that tends to happen. For example sometimes the emails it is suppost to send get caught up in the smtp pickup directory and never get sent out until the server is rebooted.
You should really ask the hosting company why cdonts has stopped working. It definetly has nothing to do with the code if it has been working all that time. If CDONTS still is supportd tell them you emails are in limbo. Ask them to look and see if a bunch of ".eml" files are stuck in the stmp pickup directly and if so to please reboot the server.
lastly:
cdonts has been deprecated and now everyone uses cdosys.
see my article
http://www.powerasp.com/content/new/sending_email_cdosys.asp
, False alarm. Dumb user alert (both the classifieds customer and me).
When I test fixes, I need to be looking at the right Ad_ID to get correct results 
, Hi, I am wondering if I can redirect users with "GROUPACCESS"
just like access levelS. I tried to redirect using both "Groups"
and "GROUPACCESS" example below:
<%
If Session("GROUPACCESS") = "1" Then
Response.Redirect("group1.asp")
Else
Response.Redirect("allothers.asp")
End If
%>
I could only get the Access_Level to actually redirect. Is
this something the option pack supports? If so, any words of
advice?
, I would like to have the ability to give a user 1 album with the default # of photos in it.
Is the best way to implement this to just add in an album creation
routine during the sigup/registration process and turn off the ability
to create a new album? Or is a user setting prebuilt into the
system for this?
, We are using this photo gallery to manage galeries of all the prodcut
lines we carry, we have no use for users to be able to sign up so i hid
that part of the pages, what i am wondering is how can i hide the rest
of the navigational links and still be able to get logged in to
admin. Here is a link to the unfinished demo site.
http://www.scs-cases.com/photogallery/
, maybe this is the issue...
do you realize that the descriptive name you give a group is not always going to be the same ID in the database ? The two are not related.
Perhaps what you named Group 1 is really group ID 3
You can tell for sure by generating protection code for group 1 and see what ID it tells you to use..
You also need to remember that you are testing this with different users and it is really easy to get confused so you need specifically log off using the log off page to ensure session info from the previous login doesn't show up and cause confusion when you log in with a different user... etc etc
in addition to logging off that way you may also want clear the session and application info via the code at the bottom of my article
http://www.powerasp.com/content/new/displaying-session-and-a pplication-variables.asp
and do that in between any user you log in as
, The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.
cwilliams38453.6665509259, ok,
IE and firefox do some things differently.
It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.
Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming
see this article which shows how to do that
http://psacake.com/web/gj.asp
'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types
You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.
, ok, glad it is working, Banners no longer show up on my site ?
If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.
The web server must have crashed or lost power and now the application variables are in limbo/not working.
I have seen this happen 3 times. Twice on my own server when the power went out for 2 hours and once on a customers server.
Basically the application variable system gets all messed up because it was not shut down properlly.
The ways to possibly cure it are as follows.
Edit and save a banner in the system. Hopefully that gets things going again.
If not... keep reading for the more drastic cures..
Go to the command prompt on the server and type "iisreset"
Sometimes that is enough.
Reboot the server.
Sometimes that is enough.
Stop the web in the IIS console.
Sometimes that is enough.
Stop the individual processes for each web in iis
"you must really know what you doing and be very careful about doing this"
Remove and recreate new applications in IIS for the web in question.
And sometimes it just takes a combination of the things listed above and a few reboots. I don't know the best way to cure it but I do know why it happens and the steps listed above can get things back on track.
Again, this is because the server lost power or crashed as far as I know.
It was not allowed to shut down properly which sometimes happens.
You'll know things are ok again when you see your banners show up on your site.
cwilliams38295.0183101852, nope ,sql server has nothing to do with this
I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about
, I would kile to see more support for the groups function:
1. on the password_admin/default.asp page have a coulmn listing groups
2. ability to change groups in bulk eg change the expiry date for all group x members
Cheers
, I have been using the AspHttp Component method for displaying my ads along with the google adsense code. However, in the last few days my site was taking too long to load, so I replaced the AspHttp component, with Javascript method. The site was back to speed. But now, the Google Adsense banners do not show up. Is there a solution for that? Can the Javascript show Adsense banners also? Because they do show the Flash banners., Hello,
I need some help with the following code. Please look at the area in red. I need to be able to set someting up to where the variable eval1 (a yes/no field in my database) is set to false after the associated link is pressed.
Thank you
="vbscript" %>
<!--#INCLUDE virtual="/irp/check_user_inc.asp"-->
<html>
<head>
<title>Administrator Evaluations</title>
<style>
<!--
div.MsoNormal
{mso-style-parent:"";
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";
margin-left:0in; margin-right:0in; margin-top:0in}
-->
</style>
</head>
<body background="../images/1.gif" bgcolor="#C0B59A" vlink="#FF0000" alink="#FF0000" link="#0000FF">
<p><map name="FPMap1">
<area href="http://www.utb.edu/" shape="rect" coords="627, 66, 670, 81"></map>
<span lang="en-us"> & ; ; ; ;nbsp; & ; ; ; ;nbsp; & ; ; ; ;nbsp; & ; ; ; ;nbsp; & ; ; ; ;nbsp; & ; ; ; ;nbsp;
</span>
<img border="0" src="https://blue.utb.edu/irp/Inst-Research&Plan.jpg" usemap="#FPMap1" width="675" height="82"><br>
</p>
<h2 align="center"><span lang="en-us">Administrator Evaluations</span></h2>
<p align="center"> </p>
<p align="left"><span lang="en-us"> <b>Welcome, </b> </span> <b> <% Response.Write(Session("FIRST_NAME")) %>
</b>
</p>
<p align="left"><b><span lang="en-us">On this page, you will see a list of names
that represent the persons that you will be evaluating this year.
Please click on a name to select that persons evaluation form. Once you have completed
and submitted that persons evaluation, you will be returned back to this page to
continue with the next person on your list. Once you have completed all your
evaluations, you can log off the system using the link below.</span></b></p>
<p align="left"><b><span lang="en-us">Please note: Only <u>1</u> submission per
person will be accepted, any additional submissions will not be accepted.</span></b></p>
<p align="left"><span lang="en-us"><b>If you have any questions please feel free
to contact us at the number below.</b></span></p>
<hr color="#FF9933" width="80%" size="3">
<p align="center"><span lang="en-us"><b>Please click on a name below to begin
the evaluation process.</b></span></p>
<div align="center">
<table>
<%If Session("Link1_Name") <> "" Then %>
<table border="1" width="28%" id="table1" bordercolor="#000080">
<tr><td bgcolor="#FFFFCC" style="float: left"> <b><span lang="en-us"> <a href="https://<% Response.Write(Session("Link1"))%>" onclick="<%=Session("eval1")="true"%>;return true" </href> <font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link1_Name"))%>< /span></font></a></span> </td>
</tr>
<%End If%>
<%If Session("Link2_Name") <> "" Then %>
<table border="1" width="28%" id="table1" bordercolor="#000080">
<tr>
<td bgcolor="#FFFFCC" style="float: left"> <b><span lang="en-us"> <a href="https://<% Response.Write(Session("Link2"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link2_Name"))%>< /span></font></a></span></td>
</tr>
<%End If%>
<%If Session("Link3_Name") <> "" Then %>
<table border="1" width="28%" id="table1" bordercolor="#000080">
<tr>
<td bgcolor="#FFFFCC" style="float: left"> <b><span lang="en-us"> <a href="https://<% Response.Write(Session("Link3"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link3_Name"))%>< /span></font></a></span></td>
</tr>
<%End If%>
POST EDITED / SOME CODE REMOVED TO KEEP IT SHORTER ..
This went to Link3_Name
</table>
<p> </p>
<p><span lang="en-us"><b>If you have completed all your evaluations and wish to
log out please click <a href="log_off.asp">here.</a></b></span> </p>
<p> </div>
<div class="MsoNormal" align="center" style="text-align:center">
<hr size="3" width="80%" noshade color="#ff9933" align="center"></div>
<p align="center" style="text-align:center"><b>Institutional Research and Planning
<br>
Tandy 270<br>
80 Fort Brown<br>
Brownsville, TX 78520</b></p>
<p align="center" style="text-align:center"><b>Phone: 956-544-8816 &nbs p; &nbs p;
Fax: 956-983-7652<br>
E-Mail:
<a style="color: blue; text-decoration: underline; text-underline: single" href="mailto:iresearch@utb.edu?subject=Administrators%20Evaluation">
iresearch@utb.edu</a></b></p>
, I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.
Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->
Here is the error:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30689: Statement cannot appear outside of a method body.
Source Error:
Line 15: <%
Line 16: ' This is part of the too many login attempts lockdown code which sets a cookie to block login attempts for a certain amount of time
Line 17: If LoginLockDown Then
Line 18: If Request.Cookies("PASSWORDSYSTEMCOOKIETRIAL")("LoginTries") <> "" Then
Line 19: If Cint(Request.Cookies("PASSWORDSYSTEMCOOKIETRIAL")("L oginTries")) = Cint(LoginLockDownAttempts) Then
Source File:
D:\Sites\resadmin\NetOptions\testsite.com\www\ASPProtect\che ck_user_inc.asp Line: 17
, I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.
I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..
maybe show me the site ? so I can see this happening ?
cwilliams38348.9748726852, Using just ASP (Form Based Authentication) you can only protect the actual content of the ".asp" files.
You can however use some ASP tricks to stream other types of files to the users.
That way the actual file locations are never known and they can only get them/see these files when they are logged in as you would be streaming files to them after they logged in.
Below are informative links I have collected on the subject in an email I sent to another customer a while back.
Using Active Server Pages you can only protect ".asp" pages.
You can however password protect ".asp" pages that stream files to the user using code like in these examples therefore keeping the actual file name a secret.
And from another email I sent...
ASPProtect only protects the content of ".asp" pages. Directory protection is not possible using just ASP.
Other file extensions can not be protected using just ASP.
There are ways to get around this.
You'd want to do a technique like this to stream non ".asp" files to the users.
The safileup component from softartisans can actually do something similar as far as streaming the files go.
Then use something like ASPProtect to protect the ASP files that streams the files.
The actual location of the files is never known to the users and of they don't have access to the asp pages they can not see or get those other types of files.
Very doable, but nothing ASPProtect takes care of automatically.
This info above should get ya on track.
cwilliams38344.8751736111, Javascript Popup/Pop Under Generator
Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.
Just dont use option 2 on that page as that is specific to banmanpro
http://www.banmanpro.com/support/popupgenerator.asp
cwilliams38291.614849537, you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..
ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations
For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.
I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.
Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.
, do you have the url path to the registration page set correctly in the settings cause not having it there would do that ? , The ASPProtect v7.x Documentation is now available as a download in windows ".chm" format. (needs to be viewed on a windows based machine that can read it) If you are using XP with Service Pack 2 follow the instructions below or you will not be able to view the help file.
Download Documentation
You should save this file and then open it.
Just opening it from download may not work and you will not be able to read it correctly.
Please continue to check the support forum threads for the most up to date documentation.
IMPORTANT
If your are using xp with service pack 2 there are some new security features that can block the access of help files you download. So as far as the ".chm" file goes.. you have to download it... right click on it...go to properties... then choose unblock down in the lower right corner ...then you can open and view the file correctly
, Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.
Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.
Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.
If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.
, [QUOTE=cwilliams]
something weird is going on
[/QUOTE]
Yeah that's my impression too. I've done a lot of searching before posting this problem, but haven't solved it. Maybe it has to do with the sql-server/hotel?
Though I have compared carefully what goes on (and it should all be good) it could still be the problem? I have now made it work on a local msde sql server too.. 
, ok.. There are various spots that call the end_date variable. That is why I am asking. Then incorporating it into the forms that have been developed, made me wonder.
, A nice addition for the listing script would be if the script would allow a "featured ad" or ads that would appear on the default page. , I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.
I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.
When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.
On a whim, I took the page I was publishing in FP and published the same page with my FTP program. It worked! What I can't figure out is what FP does to the files to screw them up so they won't function. Is there a setting in FP that I have to change to get it to work? The files look the same, but they are different sizes when I overwrite them with FTP.
Any ideas? I don't want to have to publish my entire site with FTP as it is a FP template site.
Thanks,
Dave
, Ok, for starters what is the real error ? Please read this.
http://support.cjwsoft.com/code/moreinfo11-1.htm
2nd I always recommend using CDOSYS before any other email component. All servers have it running by default and ASPProtect supports some a html editor if you use that component. I would give that a try as well. It's the best emailing option.
, well, like I said.. I am leaving in about 5 minutes for the wedding.
If you put this up on a live server that I can connect to I will look at it tommoro for you. I have told you everything I could possibly tell you so I dont think your going to figure it out based on the things you have told me so far.
Only other thing I can think of is make sure your not running anything goofy on that server 2003 box. Norton Antivirus script blocking... various ad blockers.. anti spyware applications... etc etc... They can cause problems as well. , one more problem I see...
I think your login box on the main page is missing the hidden form variable
http://support.cjwsoft.com/code/moreinfo169-1.htm, IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .
Good coding Christopher
Thanks
John
, 5300 users honetly wouldn't even phase the database or the code... even with MSAccess...you got other problems and I can say that with 150% certainty
my guess is permissions on the database folder are not quite right or the odbc drivers have issues.. something along those lines..
access databases act up when full modify permissions are not given to the folder they are in.... they can also act up if the odbc drivers are very new and you are not using a newer version of the access database such as 2002 version as opposed to a 97 or 2000 version
using a system dsn as opposed to a dsn-less connection can also cause BIG issues. always use a DSN-LESS connection
you can also have big problems if just the database file is given permissions instead of the whole directory it is in
also, the script timeout has nothing to do with it.. if that is happening something is wrong with the data connection like I said... no amount of changing timeouts is going to cure it...
how permissions are correctly set
http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp
why system dsn's with access databases are bad news
http://support.cjwsoft.com/code/moreinfo9-1.htm
I know it worked at 1st but it can still be related to all of this because when permissions are not perfect databases will work ok for a while and then act up. it all has to do with the temporay lock files that access creates and deletes on a regualr basis
,
Hello,
I want to create a user for my manager. This user should be able to see
all statistics (Reports) and all (Banners). But, he should not be able
to edit anything.
How can I create the type of user described above?
Best regards,
Mohammad Al-Mohsin
, I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.
http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1
, I dont what it is..u got to just keep trying stuff like connecting to different versions of the database and maybe even the version with no password set on it.. maybe do some iisresets in between if it is your server.. maybe try putting the database in a different folder
Usually people have zero trouble setting up this particular app because everything is so time tested and rock solid...
its just got to be something related to the actual data connection.. low level stuff , While I originally thought the login form on a non-protected page idea may be similar in setup to how our Classic ASP version of ASPProtect works I could not have been more incorrect. Truth is I forgot that it works a lot differently.
ASP.NET Web forms are meant to post to themselves and there is thing called the viewstate. (google it.. its a hidden variable the server creates in the form code that is required when the form posts back to itself.. and hold all sorts of information the server uses) Doing what you are asking about means disabling the viewstate and that can have big consequences and break certain things.
Basically you cant just put a form on a non-protected page and post to a protected page if the viewstate is enabled. Disabling it can break certain web controls like data grids .etc etc.. and can also have an effect on how the session is managed at the site and sometimes disabling it is not possible depending on what is going on cause you need it.
I am still doing research on the whole thing, but it looks to me like doing that is going to have a tradeoff of some sort.
That does not mean this isn't possible somehow. I am still researching and I am also going to see what John Evans thinks.
I told you .NET was complicated.
As for your other question that is something you have to sort out on your own by editing the code and recompiling it based on your custom project needs. It is not something I can help you with. , Personally, I think that is something you should work into your existing site code or something you should handle on your own.
It's basic site maintenance issues.. and something every webmaster must deal with on an individual basis. If you are going to upload a new version of some large file of course you should go disable wherever people are dloading it from and then wait/re upload/turn things back on.. etc etc
It is not going to be a feature of ASPProtect and I don't see why it should be. If you want to have some sort of global site is temporaily down thing you should have a common server side include on all your pages right after the password protection include file. In that include file you could easily stop site access with a response.end and also show a message.
Or you should disable a file download page manually on a file to file basis.
Really, big busy sites that have their sh*t together use versions of files for a reason. Every new upload is a slightly new version revision and has a slightly different file name They do this partially to eliminate the problem your talking about and also because that is the way it should be done. Nothing gets uploaded over itself ever. Even if there is a mistake in a file they upload a new revision and document it in the revision/changes file. And of course they dont show users a link to a new file revisions until it is uploaded.
, My guess is they are not going to allow you to run your own oledb connector out of your own personal bin directory.
I don't think your going to be able to modify aspprotect to work under
that environment very easily, but I would give 1&1 a chance to
explain their reasoning and they might actually be able to provide a
simple fix who knows.
I have never seen a situation where a host goes messing around with
.NET that worked out good for anyone. I'm sure they have a reason, but
the entire world writes code to work on the platform as Microsoft
shipped it not as someone decided was a better way to set it up.
,
Timecard Entry: 3/25/2006 4:25:07 PM
Reading and responding to emails and voice mails, lunch, ticc meeting, Setting up meeting w/ Bill w/ Paul, patec meeting, Spoke to John Bashem about the NCTW article - filled out Work orders for several ads, On phone w/Amy again. Fixing spelling error in Faculty admin, helping her fill pages and calendar with content for meeting., Koffe Kove food, Help Andrea with labels for Paul's mailing, WOrked oon revisons to the TV commercials currently running, travel time, meeting with Key Bank, Finishing up CostGuard server setup, and on phone twice with Wayne Noble of CostGuard, Team meeting, daily reports, *TaskForce: Company meeting, company picnic, Out of the office, worked on vb scripts to help make adding domains to nt box easier, phone with Jennifer Stevenson about changes to slcmls.com Web site, Filling out paper work for 401k., fixing Kris Allen's laptop, 25 Miles : Clayton - Watertown, had a setup. some general calls, Filled out Modem Maintenance Log., team meeting, billing, Install Router and Program on-site at Fishercast, General - timecards, etc..., Conference call with River Road Partners, Managers Meet, Via Net Meeting,
