i've got a client who has handed me a 151 character banner URL, and i see that the database is designed to take 150 characters. i took the obvious step of just increasing the size of that text field in the database, but i still get this error when i try to enter the URL in the proper form field:

Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.

/banners/aspbanner/save_banner.asp, line 200

now, line 200 is just this:

If Banner_Link_URL = "" THEN
 CmdEditBanner.Fields("Banner_Link_URL") = NULL
Else
 CmdEditBanner.Fields("Banner_Link_URL") = Banner_Link_URL
End If

which tells me that something is blocking the assignment of that long value to that field, even though i believed i had extended the length of that field in the source database.

where else might i look?

in the version you have changing it is not something we covered

I believe you will find it the "config_inc.asp" file in the root though... be careful with naming it though because if you use any spaces or weird characters it might cause issues with various functions in the application like emailing.. I recommend just using letter, numbers, and maybe dashes

If I would like a link on my web page that will take someone to the login page (I would also like this page to contain forgot passord? and register)   I am not entirely clear what file to link to to do this.  Would it be check_user_inc.asp?

Thanks in advance?

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

It a generic error that means something is wrong with your data connection.

http://support.cjwsoft.com/code/moreinfo27-1.htm

http://support.cjwsoft.com/code/moreinfo136-1.htm

Hi,

Could you please advise what may be causing this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57a4 Thread 0x5474 DBC 0xf03a704 Jet'.

/ASPProtect/check_user_inc.asp, line 292

Funny thing is that if I refesh the page with the above error it gives me the following eror:

/ASPProtect/check_user_inc.asp, line 292

and after few times of refreshing the page it shows me the page I am after.

Is this my promlem or ISP's.

Thank you

Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

Still not ready... I have no time to finsih it at the moment..

release date is unknown...

Redirecting is not something ASPProtect does because you can
do that sort of thing using simple ASP redirects.

In all of these examples you are going to want to protect the pages you send these users to accordingly.
So that if they know the url they just cant go their directly without loging in.

Redirecting example..
This page will redirect admins or level 4 users to a certain page  and anyone else to
another page.
 
 
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If Session("Admin") = "True" or Session("Access_Level") = "4"  Then
    Response.Redirect("sompage.asp")
Else
    Response.Redirect("someotherpage.asp")
End If
%>

Redirecting example..
This page will redirect level 1 users to a certain page. level 2 users to certain page, and anyone else to
another page.
 
 
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If Session("Access_Level") = "1"  Then
    Response.Redirect("level1.asp")
ElseIf Session("Access_Level") = "2" Then
    Response.Redirect("level2.asp")
Else
    Response.Redirect("allothers.asp")
End If
%>

Redirecting example..
This page will redirect user "PistolPete" to a certain page.

 
<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
 
<%
If Session("Username") = "PistolPete" Then
    Response.Redirect("somedirectory/somepage.asp")
End If
%>

 
then just make sure the page you send the user to to also checks to see if the user is the right user.... to make sure others users can't access each others pages
 
<%
If Session("Username") <> "PistolPete" Then
    Response.Write("You do not have access to this page.")
    Response.End
End If
%>

etc etc etc.... these code snippets should point you in the right direction...

I have written asp.net application pages- obviously i knew what viewstate was, or else when they made a mistake on that page it would not have saved their filled in info. Same thing for after they submitted, when they hit the back button their info would be gone.

For someone who wrote this software it seems you are not able to do simple things. Im begining to think you didn't write it. The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

I know how the log boxes work. Esp. reg ASP... they all allow you to enter your username and password and then when you hit submit it gets verified and transfers you to your destination. ASP.NET has that capability also.. i didn't purchase a program to go and have to re-write it in visual studio. It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

The program seems to have some great complex features, however, your not able to incorporate this easy login from a diff. page function... fishy

perhaps the filesystem object is disabled on the server ?
or some sort of script blocking is running and causing a problem ?

other than that I can take a look if you put it up on a live server.

In a way your questions are confusing to me, but here is some information regardless.



Using Active Sever pages you can not protect entire folders. It is simply not possible. ASPProtect is Active Server Pages scripts so it can only protect individual ".asp" files.


If you are concerned about customers downloading the access database..

best practive is to store it in different folder name than it came in
best practive is to give the database .mdb file itself a different name
best practive is to change the password on the access database
best practice is to store it in a directory that is not part of your web if possible.. many of the better hosting companies have it set up so you actually can do that

the more of these things you can do the better..

And if you are really worried about security you should use a SQL Server database which nobody can download from your website under any conditions because your data lives in the sql server and unless they get the username/password to it they can not access it.

Hello,

 I need some help with the following code. Please look at the area in red. I need to be able to set someting up to where the variable eval1 (a yes/no field in my database) is set to false after the associated link is pressed.

Thank you

="vbscript" %>
<!--#INCLUDE virtual="/irp/check_user_inc.asp"-->
<html>

<head>
<title>Administrator Evaluations</title>
<style>
<!--
 div.MsoNormal
 {mso-style-parent:"";
 margin-bottom:.0001pt;
 font-size:12.0pt;
 font-family:"Times New Roman";
 margin-left:0in; margin-right:0in; margin-top:0in}
-->
</style>
</head>

<body background="../images/1.gif" bgcolor="#C0B59A" vlink="#FF0000" alink="#FF0000" link="#0000FF">

<p><map name="FPMap1">
<area href="http://www.utb.edu/" shape="rect" coords="627, 66, 670, 81"></map>
<span lang="en-us">&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& ; ; ; ;nbsp;
</span>
<img border="0" src="https://blue.utb.edu/irp/Inst-Research&Plan.jpg" usemap="#FPMap1" width="675" height="82"><br>
&nbsp;</p>
<h2 align="center"><span lang="en-us">Administrator Evaluations</span></h2>
<p align="center">&nbsp;</p>
<p align="left"><span lang="en-us">&nbsp;<b>Welcome,&nbsp; </b>  </span> <b> <% Response.Write(Session("FIRST_NAME")) %>
</b>
</p>
<p align="left"><b><span lang="en-us">On this page, you will see a list of names
that represent the persons that you will be evaluating this year.
Please click on a name to select that persons evaluation form. Once you have completed
and submitted that persons evaluation, you will be returned back to this page to
continue with the next person on your list. Once you have completed all your
evaluations, you can log off the system using the link below.</span></b></p>
<p align="left"><b><span lang="en-us">Please note: Only <u>1</u> submission per
person will be accepted, any additional submissions will not be accepted.</span></b></p>
<p align="left"><span lang="en-us"><b>If you have any questions please feel free
to contact us at the number below.</b></span></p>
<hr color="#FF9933" width="80%" size="3">
<p align="center"><span lang="en-us"><b>Please click on a name below to begin
the evaluation process.</b></span></p>
<div align="center">
<table>
         
       <%If Session("Link1_Name") <> "" Then %>
    <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr><td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link1"))%>" onclick="<%=Session("eval1")="true"%>;return true" </href>  <font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link1_Name"))%>< /span></font></a></span> </td>
  </tr>
  <%End If%>  
       
   
  <%If Session("Link2_Name") <> "" Then %>
  <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr>
  <td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link2"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link2_Name"))%>< /span></font></a></span></td>
  </tr>
  <%End If%>
 
  
  
  <%If Session("Link3_Name") <> "" Then %>
        <table border="1" width="28%" id="table1" bordercolor="#000080">
  <tr>
   <td bgcolor="#FFFFCC" style="float: left">&nbsp;  <b><span lang="en-us">&nbsp;<a href="https://<% Response.Write(Session("Link3"))%>" </href><font color="#000000"><span style="text-decoration: none"><%Response.Write(Session("Link3_Name"))%>< /span></font></a></span></td>
  </tr>
  <%End If%>
  
 
POST EDITED / SOME CODE REMOVED TO KEEP IT SHORTER .. 
This went to Link3_Name    
    
 
</table>
<p>&nbsp;</p>
<p><span lang="en-us"><b>If you have completed all your evaluations and wish to
log out please click <a href="log_off.asp">here.</a></b></span> </p>
<p>&nbsp;</div>
<div class="MsoNormal" align="center" style="text-align:center">
 <hr size="3" width="80%" noshade color="#ff9933" align="center"></div>
<p align="center" style="text-align:center"><b>Institutional Research and Planning
<br>
Tandy 270<br>
80 Fort Brown<br>
Brownsville, TX 78520</b></p>
<p align="center" style="text-align:center"><b>Phone: 956-544-8816&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Fax: 956-983-7652<br>
E-Mail:
<a style="color: blue; text-decoration: underline; text-underline: single" href="mailto:iresearch@utb.edu?subject=Administrators%20Evaluation">
iresearch@utb.edu</a></b></p>

Tony,

ASPBanner.NET was discontinued about 14 months ago. It is no longer supported in any way because quite frankly the classic ASP version is faster, more stable, has more features, and is a lot easier to install and get running.

If you PM me via the forum you are welcome to a copy of the current ASP Unlimited Version. It can serve banners to any type of page extension. All you have to do is ask for a copy.

Whether or not your existing ASPBanner.NET database is exactly the same structure I do not know, but I believe it is. You should compare the two if you plan to keep using the old database and make any neccessary changes so the old database has the exact same structure as the new version. If there are any differences they are very few.

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

I guess i am not being clear as to what i am trying to do. As far as the event thing... lets hold off on that for now. It seems Chris has answered my question and i am on my own for that one...

As far as the log in goes: I went to that site you mentioned;www.CafePress.com to see if they had what i was talking about. and they do. Notice on the bottom of the page it says "sign in to your account"

I want that option on my home page where users can sign in to go to their account. It will either take them to a page where they can update their info, or it will take them to a protected page. Pretty much instead of posting a link on the site to say... click here to go to members.aspx and have it return an "access denied" the user can enter their info from the main page and be automatically re-directed to that members.aspx page.

I know how the viewstate works and i also know what that returnURL thing does..pretty self-explanitory.

Hopefully that makes things easier. I just want a user to log in from the homepage and be redirected to either a protected page or their account page...

(as does that cafepress website)

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

Hello,

My guess your having trouble setting up a system dsn because the database has a password set on it. Your hosting company most likely sets up DSNs without using the advanced tab which is where the authentication information goes. Or they have some sort of web interface for the customers to use that doesn’t allow setting up that information.System DSN’s are actually difficult to set up correctly when the database has a password on it. There is of course a password on the database for security reasons so if someone ever downloads it somehow they will not get your information.

System DSN’s are not the way to go regardless as you will see mentioned at our support site.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=9&P N=1

You really should try setting up a DSN-less connection. It is the best way to go. They are easier to set up, perform better, and are less load on the server. Any host that wants it customers to use system dsn’s is not on the ball as far as server performance and server resource conservation goes. They are really asking for trouble down the road.

All you need to do to make dsn-less connection is the following.

Get permissions set for the folder the database is in (by your host)… then figure out the physical path on the server to the database by using server.mappath or you simply ask your host for the info.

An article I wrote on using server.mappath

http://www.powerasp.com/content/hintstips/physical-path.asp

Then your connection string will look something like this.. (of course you edit the path to match what server.mappath tells you. And you make sure the database name is correct)

ListingsConnectionString = "DBQ=C:\Inetpub\wwwroot\asplistings\_database\asplistings_ac cess2000.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Another option would be to simply remove the password from the database using MSACCESS.. then try to connect to it using a System DSN without the password. If your host is storing the databases outside of your web in the root of the server then removing the password on the database is not that bad of a thing to do as there is no way anyone will be able to dload it from your site. Of course there is a still a performace loss when using a system dsn with an Access Database

I would kile to see more support for the groups function:

1. on the password_admin/default.asp page have a coulmn listing groups

2. ability to change groups in bulk eg change the expiry date for all group x members

Cheers

thats not good.. its a web server configuration issue of some sorts ?

post is a common method for forms.. if it is not supported it is something you should ask the server admins about.

Is this a windows based web server running true microsoft ASP because that error is usally associated with non windows IIS based web servers from what I can see by doing a google search ?

ASPProtect only runs on windows servers running IIS and True Microsoft ASP.
http://support.cjwsoft.com/code/moreinfo165-1.htm

My guess is your web server is running Apache Unix or something like that.

Chris,

When I set up a test user name it does accept name and passwords and the passwords are encrypted, no problem there.

All I want to do is to restrict access to the protected pages to the members only. Only those users will be accepted and allowed to view.

I have entered all of thier names, address, phone number, email and company in the database, which is still named ASPProtect_access2002.mdb and in the fpdb directory of wwwroot. To get it there I uploaded via FTP.  I hope I expained the situation well enough.

This issue came up once before and when I investigated I could find no error in the html that aspprotect generates and those files do exist where they are supposed to. We concluded it was a parsing error from the log file system.

There just really isn't anything I can do about it. I spent a week trying to figure it out. It is just the log parser screwing up under certain circumstances where there is no reason anything is wrong. They have trouble dealing with some of the complex URL/querystrings that the ASPProtect admin area uses. They think there is a 404 eror when there isn't... etc etc

I have imported like 50,000 users into an access database when testing... it took like 4-5 minutes but worked..

course it really all depends on the setup how many you can get away with

something must still be wrong

have you tried just importing 1 or 2 users for troubleshooting sake ?

I would also recommend that after any timeout you reboot the server or at the very least do an "iisreset" to get things back to normal

you summed it up perfectly... everything you said really

As for the banner software custimizations.. you could just make another folder with a modified admin area (little tweaks here and there so the person logged in only controls their own banners) You'd probably want to add an approval process so nothing they did went live unless you really really trust them. That wouldn't be that hard either.

I always planned to do it someday but I just never have time.

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

That being said, ASPIN has a lot of problems with anonymous reviews so if you can please sign up with them and post an Authentic review as they carry a lot more weight. Authentic reviews involve responding to their validation email so when doing so use a real email address that you regularly check.

And sorry I made you use the forums, but as you can see this is exactly the sort of thread that will help someone else later on.. and that is why I require people to use the forums now instead of just email support. That way the conversations are out in the open where they can help everyone instead of buried in my outlook where no one will ever see them. And of course if information is sensitive you can always do a Private Message as you did earlier.

It is all about creating a knowlegebase of valuable information.

Noted:
I actually did not think you did.

As far as debugging goes.. thats all built into visual studio.net.
There is a tag you edit in the web.config file to enable project debugging
http://support.cjwsoft.com/code/moreinfo251-1.htm

Like I said though for changes to ASPProtect.NET I'd start off from scratch and stick with vb.net... using the visual.studio.net interface is not really vary hard to remove and change things you dont' need even if you are a C# coder. Especially simple stuff like you mentioned.

You can't do that. ASPProtect 7 does not work with ASP.NET.

It is a classic ASP application. As the web site states it can only be used to protect ".asp" pages written using vbscript.

ASP and ASP.net are completely different animals.

Thats why we have a .NET version.
http://www.aspprotect.com/more_info_net.asp

Perfect exactly what I was looking for.

Thanks