ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

I Dont know... it shouldnt do anything like that.

if it ever asks to download a aspx or asp page its generally a server configuration issue not related to the actual code

provided you arent trying to grab the injectbanner page through an iframe call which is only for use with the javascript method of calling banners

Well, I assumed I'd be able to tweak this thing but it is all so intertwined it doesn't pay to mess with any of the files. Hence, I'm going to have buy a different system only a week or two after buying the unlimited version here.

As I leave I want to give you some impressions here. While the system is low-cost, the 99 dollar version is missing a few pieces that I think would bring the value to 99. It is one thing to talk about the speed/performance, but to a degree that's hard to measure, and to anyone with web advertising on their site, performance will always run second to potential site income.

It definitely needs a user interface and registration for advertisers, and it definitely needs a single variables file for changing the hundreds of variables for which there is no control. I had to search on my own just to change the look and feel.

Lack of multi-zone support is a serious drawback. I would submit that anyone with a serious website needs it, and will gladly pay you 139 over 99 for just that one feature.

Take them or leave them, they are just suggestions.

I had both ASP Listings & Classified on the same website.  The categories seem to be getting mixed up. I removed ASP Classified but classfieds categories is still appearing in the student of ASP Listing.

How do I fix this?

Thanks

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

To be honest I just can't remember what happens. It has been a long time since I did a real live test of that. I know it seemed like a pretty smooth process to me. Right now I can not test it out as I am on a road trip with my motorcycle and I am sending this email from my PDA.

I would ask Dave at this website.
http://www.davephoenix.com/

Or via this username in the forums
PhoenixUK

He can tell you what happens as he has been using the IPN stuff for about a month now.

Perhaps another user could chime in here as well and let us know. I know there are a lot of people using the IPN stuff.

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

nope ,sql server has nothing to do with this

I am talking about the folder pictures are stored in.. it needs modify permissions set for the internet guest account like those articles talk about

Installed latest verison  Doesn't seem to have corrected problem.  Still with same message.  I wonder if deleting this user and putting him back in might help.  I have not however tried any other user names and passwords.

My hosting company uses ASPEMAIL - and I am trying to setup the mailing settings on ASPPROTECT - but cant seem to get it to work.   I've tried many different options - here are two that are the closest - but have issues:

1. If I use the settings:

email component: aspemail

Mail remote server: my internal server name

*no smtp authentication

email mail notification - my email address on my internal server

***I get the following results:

       I can get get notified when a new user logs in, email a user from aspprotect user screen if they are in my company and have a valid email -- but I can not send to the outside world - I get an relay prohibited error.

2. If i try to change the setting to use the Hosting Website email server - I get the following results:  I dont get notified when a new user registers, I cant send to internal company people - but I can send to the outside world.

**any suggestions on what to do? I'm trying to work with the people who manage the mail servers - but since I dont know anything about them - its a bit difficult.

Line 409:
Line 410:
Line 411:		<authentication mode="Forms">
Line 412:			
Line 413:			<!-- DO NOT CHANGE UNLESS INSTRUCTED TO DO SO -->

On the banner rotation order screen it says:

"The Order Of These Banners Will Change Randomly From Time To Time"

Can you tell me the function that does this? I'd like to increase the frequency with which the rotation order changes.

Thanks!

If you have found out that parent paths are disabled on the web server you can still use the application.

Before you continue.

If it is your server consider enabling parent paths to solve the problem.

If it is not your server consider asking them to enable parent paths for your web site to solve the problem.

If that is not possible please download this zip file.
2005-02-20_150703_aspprotect_v7.x_alternate_include_file_pat hs.zip

This zip file contains 3 sets of alternate files depending on your situation. You simply replace your existing aspprotect v7.x files with these new ones.

The zip file contains the following folders and files.

Below is the contents of the readme.txt file which explains everything.

The following folders each have a version of all the files in the ASPProtect system that might need to be edited in case you need to change the paths for the server side include files. There are 3 different scenarios.

(parent paths enabled) - This is the way the application comes.
The files in this folder have FILE server side includes containing "../" information. While these includes will work when the applicaion in is any location of a website they will not work if parent paths are disabled on the web server. Generally you will want to use these on your xp development machine. You can of course use them on your real server if parent paths are enabled. Parent Paths are now disabled on II6 by default and some hosting company will not enable them.

(domain root)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in the root of your web domain. For example if your domain was called "www.somedomain.com" the following aspprotect files and folders would end up like this
"http://www.somedomain.com/check_user_inc.asp"
"http://www.somedomain.com/password_admin"
"http://www.somedomain.com/users"

(domain directory)
The files in this folder have VIRTUAL server side includes in them.
These includes only work when the applicaion is installed in a directory called "aspprotect" in the root of your web domain. For example if your domain was called "www.somedomain.com" the
following aspprotect files and folders would end up like this
"http://www.somedomain.com/aspprotect/check_user_inc.asp"
"http://www.somedomain.com/aspprotect/password_admin"
"http://www.somedomain.com/aspprotect/users"
You can change the name of the "aspprotect" directory but you will will have to edit the includes in the files.

Lastly, if you are on a local machine and insist on using the VIRTUAL INCLUDES you would also use the (domain directory files) even though you dont have a domain on your local machine most likely
For example if your site was installed like so.
"http://localhost/aspprotect/check_user_inc.asp"
"http://localhost/aspprotect/password_admin"
"http://localhost/aspprotect/users"

If you need to know how to enable them on your test server.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

When a new user adds themselves to the db thru the registration page, no user id is assigned in the User_id field.  I can't access the page on-line due to an user_id related error on the page.  I must use access itself and add the user id.  After that, everything works as expected.

What have I done?

I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.

Our knowledge base which is hosted at a remote location is protected by ASPProtect Full Version 6. I would like to allow our employee to access the knowledge base from within our internal network unchallenged. Is there a way which I can modify the code "check_user_inc.asp" to allow any one coming from say 10.1.X.X to access the site unchallenged?

Thanks,

Mo

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance

someone has to do something other than me.. i've given up

if i give u the username/pw can you set this up on the network solutions host and ask them to set whatever permissions are needed?

cant do it anymore....

Perfect exactly what I was looking for.

Thanks

Just having the database with members does not protect the page.  You need to add the appropriate code to every page you want to restrict access to.

You need to click on the Groups tab in Admin. 
Click on Generate PW protection code. 
Click on the basic button if you don't want to include levels or groups or choose a level or group(s) and click the appropriate button. 
Paste the code that's generated  into the top of an ASP page in code view.

Is that what you're looking for? 

Michelle

Hi,

First and foremost, a great product. I downloaded it last night and it took little effort to get it up and running

.....now a little question...

Has the software/code been tried out on a Mysql db and if so did it work?

The reason I ask is that my website is very busy (1.5million page views per month avg) and I'm considering converting the ASPBanner Access db to a Mysql one to help handle the traffic. For every page view one banner impression is being made which means that the Access db is under a bit of pressure

This afternoon there were 1012 simultanious users on the website and it froze with an error message displaying where the banner should have been (I didn't quite catch the message but something to do with the banner script timing out). I'm not sure if the Access db had something to do with it but it seemed too coincidental. Rebooting the server cured the problem but obviously kicked off the visistors as well
At present there's 668 online and no problems so I'll have to monitor it to see how it goes but if anyone can answer the Mysql question I'd be grateful

Thanks,

Dave

Our webhost set the permissions, but the error is still there, so that is obviously not the problem.  We now have both our webhost and our asp support technician trying to figure out the problem and everyone is stumped.  Can you please provide us with the following information to help us out:

1) what is the name of the file that sets the connection string?

2) what is the name of the file, if it is different from above, that sets the password of the database?

thanks

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

You can't do that. ASPProtect 7 does not work with ASP.NET.

It is a classic ASP application. As the web site states it can only be used to protect ".asp" pages written using vbscript.

ASP and ASP.net are completely different animals.

Thats why we have a .NET version.
http://www.aspprotect.com/more_info_net.asp

I think its great to share a mod.

I will have  few with the new album.

Glad it is working.. for anyone reading this the customer bascially did this
http://support.cjwsoft.com/forum/forum_posts.asp?TID=36& PN=1

That being said asp photo gallery actually has a few more places that send email that you going to need to modify as well. Off hand the reply to album, admin massemail, admin send email,and postcard features come to mind possibly as 3 of them.

using a multiple file search and replace utility like ReplaceEm would be the easy way to do all of this in one step and find all the instances

http://www.orbit.org/replace/

Perfect. Thanks buddy :)