As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

I think you may be using old code where that was an issue... I am going to PM you the latest version..

to be safe upgrade all the ASP files except the dataconn_inc.asp files and your config_inc.asp files

"be real careful not to lose your current encryption keys in the "config_inc.asp" file or you will be in real trouble

You can use your existing database

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

I think you getting all confused about dsn's and what they really are.

A system dsn gets created via the ODBC control panel and gets listed there. A system dsn is nothing more than a registry entry telling information about where the database is an how to connect to it. Then every time code accesses the database it has to do a registry lookup. The whole process adds a lot of delays, causes very poor performance and is unnecessary.

A dsn-less connection simply connects directly to the database by specifying the driver being used, where the database is, and some other information like the password if there is one.

To get aspprotect or any other ASP application using a database all you have to do is make sure the database folder has correct permissions and then make a connection string like so. (with the correct info for your directory structure of course)

DBQ=c:\inetpub\wwwroot\aspprotect_6\data\database\ASPProtect _access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp

If you are wondering Access databases always use the same username.

So, basically if permissions are set correctly and the directory is valid it will work.
It is really that simple. 99% of the time when people have problems it is one or the other.

That being said, don't worry about the odbc control panel and what is listed there for connections. All we really care about is that odbc drivers are installed and somewhat current.


One last thign for reference: even if you do make a system dsn the database folder still needs the correct permissions.

That did the trick. Once again a quick very helpfull reply.

Thanks.

There are several pages on my website that a user may go to that are not protected (e.g. home page).  If the user has indicated that they want to be saved on this computer (until they explicitly log off), and their 1st entry point is to an unprotected page, how do I determine whether they have logged in before, and extract the info from the cookie / session variables without forcing them to log in or making the entry page protected?

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

Can we get access to the source project files for ASPProtect.net since we'd like to put in some of our own branding on the pages and not everything can be done in HTML.

Thanks

thanks for posting this... Since "private" is the default setting from what I read and setting it to "public" cured the issue chances are leaving it at "public" is the way to go.

http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/iissdk/html/33f2780a-eee8-4601-84b7-b489e4c756df.asp

http://www.w3schools.com/asp/prop_cachecontrol.asp

ALSO: since you are one the few people that has ever contributed anything helpful to the forums I am going to reward you with a free copy of the password expiration mod. I am sending you a PM with the download info.

lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

not really, aside from looking in paypal and manually adding each one for each user...

how many users are we talking about anyway ?

and were any of the users new sign ups from scratch because if they were and that field didnt get populated that is weird?

ultimately aspprotect does not use that field. I was just storing it for the sake of storing it... so its not a big deal but I would still like to figure out what is going on

removing the expiration dates from paypal subscripbers will be enough to fix the issue your having about them getting the expiration notifications

Hi Chris,

When I run the physical map test this is what I get:

The Physical path to this virtual website is: \\NAWINFS04\home\users\web\b2623\rh.vickery2004

Will that work correctly without a drive letter specified?

Thanks

Rhona

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

Alternate Method to call banners from non ".asp" pages.

<iframe src ="http://localhost/aspbanner/aspbanner/aspbanner_inc.asp?Ban nerZone=4" width="468" height="60" frameborder="0" marginwidth="0" marginheight="0" scrolling="no"></iframe>

Be sure to delete the space in the BannerZone variable above. I am not sure why it is doing that in this post.

You can try calling the banners in an simple iframe like so.
This method should work much better than the javascript method because users with javascript turned off will still see the banners. You also will not have any of the limitations the javascript method has. Iframe is now supported by most recent browsers so it is now a good solution. Here is a chart that shows which browser versions support iframe.

Be sure however to edit the height and width values accordingly as that is very important.

I checked with our web hosting company and CDOSYS is installed and properly registered on the Windows 2003 Server our site resides on.

How do I go about changing the ASPProtect code to use CDOSYS?

Please advise.

Microsoft VBScript compilation error '800a0400'

Expected statement

D:\CLIENTS\RKLARMAN\DRSWEISBERG\PASSWORD_ADMIN\../dataconn_i nc.asp, line 18

<%
^

No luck...this is the message

Return To Import / Export Screen.

Active Server Pages error 'ASP 0113'

Script timed out

/members/aspprotect/password_admin/upload_post.asp

The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.

If you have an album with more than 96 pictures, the spacing in the tables can become incorrect, with pictures touching each other. (This program is not designed to handle more than 96 pictures due to server speed, but it can handle more than 96 with minor changes to the code.) Also, after 96 pictures, the pictures will not have 6 on a line, but rather 6 on a line up to 96 pictures and then the rest of the pictures on one line next to each other extending to the right of the screen endlessly. To fix this, I simply edited the ASP code using the following loop. It can be a perminent fix, because I used the maxpicsperalbum variable to define the spacing.

<%
Dim SixInterval
For SixInterval = 2 to maxpicsperalbum
 SixInterval = SixInterval + 5
%>
 <% If PicIndex = SixInterval THEN %> 
  </tr>
  <tr>
 <% End If %>
<% Next %>

Then, the following code must be commented out:

<% If PicIndex = 6 or PicIndex = 12 or PicIndex = 18 or PicIndex = 24 or PicIndex = 30 or PicIndex = 36 or PicIndex = 42 or PicIndex = 48 or PicIndex = 54 or PicIndex = 60 or PicIndex = 66 or PicIndex = 72 or PicIndex = 78 or PicIndex = 84 or PicIndex = 90 or PicIndex = 96 Then %>
 </tr>
 <tr>
<% End If %>

This code can be found in scripts/view_album_style*STYLE NUMBER*_inc.asp . (STYLE NUMBER depending on which style you are using (found in config file))

This change in code will enter a new table row after each 6th picture. You can have more or less than 6 pictures per line depending on the width of your files and preference by changing  changing the number 5 in this line of code: SixInterval = SixInterval + 5

If you have any questions, JPortnoy@Checkernet.com

Are you reffering to the number of the left of the users name in admin.

I thought it was a counter at first but that number only displays the number of albums they have set up.

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

Hello Chris:

Yes I'm using the Option Pack.

-Ricardo

Editing the look of the login page.

In this version editing the look of the login page is very easy.
You can make this login page look exactly like you web site if you like.

You want to edit the "scripts/login_form_inc.asp" file.

It can be edited with any editor as long as the existing bits of server side code in it and the login form remain in tact.

The best thing to do is back it up before you start editing it.
Then if you goof it up you can revert back to the original.

If you edit this page with FrontPage enable the "show all" feature.
Its the little PIE sign in your icons. It will show the server side code as yellow things on the screen so you know where they are and can be careful not to delete them.

see screenshot

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

Just having the database with members does not protect the page.  You need to add the appropriate code to every page you want to restrict access to.

You need to click on the Groups tab in Admin. 
Click on Generate PW protection code. 
Click on the basic button if you don't want to include levels or groups or choose a level or group(s) and click the appropriate button. 
Paste the code that's generated  into the top of an ASP page in code view.

Is that what you're looking for? 

Michelle

Hi,

I only just purchased the product and I would be very keen to

a) is the upgrade available very soon as I don't want to spend the time developing one and than find the other released shortly & 

b) would I only need to pay the difference for the upgrade or have I already downloaded the upgrade already.

I cant see what version I current have.

I look forward to your response.

The company is called Eschelon - there customer service leaves a lot to be desired. I have contacted them again and they said that they require the account holder to manage permissions, they won't make changes. I wish they would have told me that a week ago when I asked them about changing the permissions. They haven't responded to me yet how I am to do that though.

Frontpage ext. are not installed.

Once I hear back from them about how I connect to manage rights I should be all set.

Thanks again for all your help!

Hi

I have purchased the Standard version about a week ago. Its a great script.

I have been able to select  uploaded banners from day one... but just now i dont seem to be able to select...

i know its hard for you to trouble shoot with such little information.. but i had to ask..

Should i maybe upload the site again ( but same the database first)?

regards

Domenic

Sydney, Australia

Hi all

User activity screen shows history of logged-in users.

Is it possible to view only those users that are currently logged in ? not the all users that have logged in previously

thanks in advance