I have reviewed the permissions requirements for folders from the support documentation but do not see the 'internal guest' account shown in our system to allow internet access to read/write to the access database. 

How else can we locate the proper account (or is it possible there is none?) to use to allow permissions to access the Data directory if it doesn't show up as 'Internal Guest'?

More Upgrade Info

To upgrade an existing ASPBanner system please follow these steps.

Back up your old system completely before starting.

Install the new system per the installation instructions that came with it.

Once it is running simply use your old ASPBanner database with the new system.

You may also want to keep your banner images folder from before in the same location so your existing banners still link to valid image urls because the new system stores banner images in a new location.

Since the config table in the database is no longer used you will need to go to the settings screen of aspbanner again and configure things. The config table in your old database can be deleted or left alone. It won't be used anymore so it does not matter either way.

That is all there is to it. If you have any issues please ask in the forums and we will help you out.

Kurt,

There really is no default width in general.

The thing to remember is that the default.asp page includes a lot of different pages.. and some of those pages also include pages.

Now all of this gets wrapped by the header and footer include files so in a sense what you do there can effect everything inside to a certain degree.

Now there are some widths set here and there for different tables and what not on certain pages, but its really the kind of situation where you just have to dig around in the code and experiment until you eventualy find what you are looking for and get the desired result.

I'd love to tell you there is easy way to just set a width, but it is not that simple.

Maybe someday it will be. Just not in the current version.

CJW

Sorry, I guess you did say you finally found them.
Regardless, sorry then, I tried

I dont know what else to tell ya.. except to search www.aspin.com

Perhaps you will find something you can use there.

You edit the web.config file that came with ASPProtect.NET.

You find this tag

  <customErrors mode="RemoteOnly" />

you change it to this

  <customErrors mode="Off" />

If you have a different web.config file in your root I suggest you make sure the tag is set to off there as well for troubleshooting sake

If done correctly you will get a detailed error
It's basic low level ASP.NET stuff really and does not have anything specific to do with ASPProtect.NET.

You also need to make sure your web is set up correctly for ASP.NET and that the correct web.config's are firing..etc etc

5 Computers in an office, random hardware and operating systems.  Some wireless some wired - all the same ISP connection.

Some users do not see the PLACE A NEW AD hyperlink.  How can this be hidden?  There is no conditional statement yet some see it and others don't.

To make this problem even more confusing if I take an image and put the place_new_ad.asp hyperlink on that image the users don't even see that image any longer.

How can this be resolved?

This is what "John Evans" of CJWSoft has to say on the matter...

"I think that’s pretty much impossible. If the server sees a .JPG or .JPEG extension why in the world would it go and try to read it or do anything with it.

I believe there may have been some issues with Outlook and Outlook express that made it look like a vbs script sent as an attachment was actually a JPG because someone found an exploit in those programs and it would appear as if double extension files were one thing when in fact they were not.

Having a real time virus scanner on the server (which any good host will) should also catch anything infected being built on the server drives as the file uploads. Always worked for me and I had a lot of people uploading ZIP files on winxptheme.com at one point. Many had viruses in them although I suspect it was totally innocent on the end users part. Some people didn’t even know they had a virus on their rig. 

Fact is anything is possible but I think chances of getting a virus or being hacked in some way from this sort of upload are really slim."

Hello,

Unfortuantely I can not help you much regarding the javascript because I am a server side code kinda guy. Client side javascript just isn't my thing. That was free javascript code that I used for that function. I really do not know enough about editing client javascript. Sounds like you might though.

Style 1 is really a relic left over from the standard version. I just left it in in case someone wanted to use it. Like I said because it is javascript making it do more than it does is tricky (at least for me)

Now,, for actually getting description code. The thing to do is check out how that all works in the pic_window.asp file which is what style 2 two uses. Bascially descriptions for an particular album get stored in one text file. We read that test file. Put the lines into an array. Then display the info which gets run through a functions to convert some special characters used when saving back to normal.

I tried to look at your site but it woulnt load for some reason.

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

works fine now

Yes I did see that, and created the new project as well as imported the DLL's. I guess my question is; is it as easy as rename the file from aspprotectlogin.aspx to login.aspx and then running the release to regenerate? I know this is a novice question as I am a novice to .NET but the fastest way to learn is to do. Also I know you’re an advanced programmer with better things to do so if I’m stepping over the line from technical help to basic programming I should already know, feel free to point me somewhere ells.

You cant do it from initial lohin, but you can do it from the time of registration signup.
http://support.cjwsoft.com/code/moreinfo170-1.htm

As for the emailing thing it is most likely an email sending issue more than a code problem. For example spam filters incorrectly grabiing those emails or something of that nature..

Best thing to do is try different things for emailing options until you get something that works. I suggest using CDOSYS with a real email server and using a valid email account for yourself at that email domain. SMTP authentication if necessary. This will ensure the emails sent have valid MX records and dont get treated as spam.

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

The application automatically generates all the code for you for each method of calling banners. It does this on the zones screen.

If you are using flash it also possible that the actualy flash file is what is causing things to slow up.

It really all depends... it could also be server resource related

using sql server or access.. ? etc etc

all important details

After understanding how the count works i checked the IP in the db.  They are all set to the same IP (my web server) no matter what ip is doing the viewing.  This is probably due to my ISA2004 firewall that is posting the ip address of the web server with each log on.  So, can you help me with where the code would be to modify so the db does not get updated?  I risk the refresh problem, don't think it is an issue with me.

Thanks,

http://support.cjwsoft.com/code/moreinfo286-2.htm

http://support.cjwsoft.com/code/moreinfo391-1.htm

http://support.cjwsoft.com/code/moreinfo385-1.htm

A correctly configured Microsoft SQL Database is critical to the correct operation of the ASPBanner system.

Table & Field settings must be exactly the way we set them in the database creation scripts provided with the ASPBanner system.

Below are screenshots of the design view settings for all the tables used in the ASPBanner system in case you want to double check them

In addition to the settings above each table has one field that is a primary key with an auto increment of one

In the screenshots above each of those fields has a yellow key next to it.
If the field does not have yellow primary key icon on you just right click and the option to make it one appears.

The SQL column settings for each one of the primary key fields must be set as follows




In addition to these settings the SQL scripts provided with the system auto populate the Banner_Users table with two users. This is very important because without the Admin user the scripts add you wont be able to log in to the ASPBanner system as an admin.

It is refered to as the internet guest account but that isn't the actual username. The username is different for every machine. It usually starts off with "IUSR_" and then your machine name. "Internet Guest Account" is always the account's full name as labeled by IIS when it is installed.

Regardless,

If an account isn't listed you have to add it.

Click (add-advanced-find now) and it will list off all the user accounts on the machine

You can also click (add-advanced) and simply type in the account name or part of it.

Some more tips:

If on a local machine you always just give the "everyone" account full control which is pretty much going to make anything work.

You can also go to computer management in your server's administrative tools and view all of the accounts  and groups there under "Local Users and Groups".

Terribly sorry, but we are not software-technical.  So can you please tell us exactly which folder the database would be in.

Thanks in advance.

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

Sorry, there is not any documentation on that.. it is basic asp/database work and customization like that is not supported. I recommended looking at what is already there and using that as a guide to produce more fields. etc etc

On the banner rotation order screen it says:

"The Order Of These Banners Will Change Randomly From Time To Time"

Can you tell me the function that does this? I'd like to increase the frequency with which the rotation order changes.

Thanks!

right..

I had to open up the permissions to get it to work.  I now have to go back and uncheck each one for directory listing.. :)

A mod like this would improve tracking by leaps and bounds.

Do you think this addon would be availalbe anytime in the near future? If/when this feature or mod becomes availalbe, it certainly would be ideal if some script was made to import all the log file data.

What am i supposed to do now... i do have another member server that is not a domain controller-

However, i have like 5 websites running on this domain controller already. I have thought about this before how its a HUGE security risk but it will take too long to configure everything on the other computer :(

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

I had never noticed this before, but a customer sent me email to say that they had set up their aspclassifieds profile such  that they be contacted by email and not by phone.

However, in their ad, their phone number still appears. The lines in view_ad.asp that check for True values for the Contact_Via_Email and Contact_Via_Phone before displaying that information seem to always evaluate to True, regardless of their setting in the database.

I'm using an Access2000 DB for this. When I open the DB in access, I see the checkboxes correctly unchecked for phone and checked for email. However, if I do a quick test to display the retrieved values in the view_ad.asp (<%=contact_via_phone%> <%=contact_via_email%> they both display True.

What gives? I have had nightmares with Access and its weird handling of true/false 0/1 yes/no fields, but this is driving me nuts.

Its still not there as labeled 'internet guest'.  There's a 'guest' and a host of others.  Is there a way to identify it as the proper guest account to use with ASPProtect?

Also, looking through support documentation, I see other possibilities it could be (http://www.powerasp.com/content/hintstips/permissions.asp).  Is there a way of telling which the problem is and whether we use a dsn connection or not?

The error we are getting is

 Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1340 Thread 0x17a4 DBC 0x162becc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11