I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

Version 7 uses.. RC4

The upgrade process is described here in detail including a procedure to convert existing clear text passwords to the encrypted versions. (Your passwords will need to be clear text as the system shipped of course for the conversion to do its thing)

http://support.cjwsoft.com/code/info24.htm

It is also covered in the downloadbale docs
http://support.cjwsoft.com/code/moreinfo221-1.htm

Many people have done the upgrade without any issues and Version 7 is getting great feedback.

Should you decide to go with it there is upgrade pricing.
http://www.aspprotect.com/purchase_v7_upgrade_pricing.asp

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

That being said, ASPIN has a lot of problems with anonymous reviews so if you can please sign up with them and post an Authentic review as they carry a lot more weight. Authentic reviews involve responding to their validation email so when doing so use a real email address that you regularly check.

And sorry I made you use the forums, but as you can see this is exactly the sort of thread that will help someone else later on.. and that is why I require people to use the forums now instead of just email support. That way the conversations are out in the open where they can help everyone instead of buried in my outlook where no one will ever see them. And of course if information is sensitive you can always do a Private Message as you did earlier.

It is all about creating a knowlegebase of valuable information.

Sorry you feel that way, not my intention. I'm not threatening anything. I was very happy you responded when did so there no reason for any bad feelings. I like your product as I said before and have no problems with it. Sorry again, that was not my intention. Merry Christmas…

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

That's exactly what it was.

The site owner couldn't see their own ads because Norton was blocking anything with the word ad in it.

On another note: I changed the word 'ad' to 'listing' and got it to show even with Norton.

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.

You have old code I think.

It's probably because his password used with your encryption key by chance creates a single quote and messes up the database query

A notice went out about this. I will PM you the latest download with the updated files.

I am not entirely sure how one configures the system to assign a user to a specific group.  For example, let say I have created two groups A and B, and I have pages protected by the code generated in the admin area for groups A and B.  I know I can assign access to these groups in the admin area.  However,  it is not clear to me how I do it automatically through the registration process. 

Looks great. I can't wait until this will be released. Will there also be an easy way to migrate my current version ?

Hans

as I look at your installation more I notice that you are using MSSQl as the database type.

chances are that is the source of these problems. Fields in the sql database are most likely not all set correctly

it is very important that the sql tables and fields are set up exactly as described and that the sql script we provide runs without error

http://support.cjwsoft.com/code/moreinfo160-1.htm

if you create the sql database other than the way we tell you to or the sql script doesn't do its job setting all the field types/constraints/primary keys/etc..... for some reason .. then weird things like this can happen

at this time this is my best guess as to what is going on

I would examing the sql script we provide and compare the information set in it for each field and table to your existing SQL database to see if everything got set correctly.. I would start by checking these fields 1st of all as they are very important.... (username,password,expiration_date,admin,active)

in the meantime testing the ASPProtect system with an Access database will prove that all the ASP code is working as it is supposed to if you are interested in doing that

If you code support for it yes, the application comes with no paypal code or support built in.

If you think it will help you, you are welcome to a copy of the classic asp version which supports paypal subscriptions. Perhaps looking at the code would help you.

How do I change the character length for the description field?

Don't want to install the application ? Having trouble doing it ? Don't think you can ? No problem, have us install it for you. PLEASE READ ALL OF THIS Installation service is generally available Mon - Fri during the hours of 10 am - 7 pm EST. We may very well be around to do installs at other times but we do not guarantee that. To do an install we generally need FrontPage Explorer or FTP access to your site. We also need a way to set permissions on any necessary directories, etc etc. To do a SQL Server install we need to access your SQL server via Enterprise Manager. Some installs may require access to other things not mentioned. The server must be a properly set up NT/2000/2003 server running IIS 4-6 for ASP 3.0 applications. (with support for ASP scripts and database connectivity.) Parent Paths must be enabled on the server. Please Note: These ASP scripts do not run under Chillisoft ASP. That means they do not run under Unix, Linux, Apache, etc etc. We do not install our applications on free ASP Hosting solutions. Why, because they are more trouble than they are worth. Free hosts like that are usually zero help if we need something changed. There is a reason they are free. We install the software in it's base configuration. We make sure it is running correctly. If you break the installation you will have to pay to have it fixed. We do not integrate it with your existing site or edit any of your existing web content. That is up to you. Installation fees are non refundable as is the digital source code we sell. When you purchase anything from us you agree to this. We do not do installs for IPNFulfill and Color Sequence Protection as they are simple scripts and do not even use a database.. We also do not install the IPN Support Pack as it is just a folder you copy into your web and some configuration files that you must decide how to configure based on your needs and your PayPal account info.

Any CJWSoft ASP 3.0 application (Access Database Installation)	25.00
Any CJWSoft ASP 3.0 application (SQL Database Installation)	40.00

Contact us if you have any questions.

Can you incorporate a secure log in within the scripting.  I would like the account information to be secure without having to have the whole site using running through a secure (https://) path.  If this is possible, the scripting is perfect!

sorry, I am guilty of being very tired and didnt read your message fully.

I know this forum area is called "database connection issues" but it is only meant for generic issues.

Issues specific to a particular application need to go in that applications area in the forum. It keeps the forums more organized and helps other people fnd help later on.

So please post in the correct area.
I will answer this question soon. I have to do something 1st though.

Hello,

It is very possible (just basic ASP and database accessing techniques)
It is just not the sort of thing I support in the forums as it is a customization related.

Even for me something like that would take 1-3 hours of coding time. Basically, it is just not something I could just explain to you real quick.

You might want to pick up a good book on ASP or check out some of the great resources out there. http://support.cjwsoft.com/forum/forum_topics.asp?FID=17

Doing stuff like this is relatively easy, but can be time consuming work.


In the future please use a more descriptive topic for yours posts "I need help" is not exactly helpful to anyone else searching through the forums . I therefore renamed your post accordingly.

I really try to keep the forums organized and clean. That's all.

Thanks

No luck...this is the message

Return To Import / Export Screen.

Active Server Pages error 'ASP 0113'

Script timed out

/members/aspprotect/password_admin/upload_post.asp

The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.

Help!.. I need to export the username and password fields to a mail merged letter so everyone knows their username and passwords. However whenever i access the database or do an export. The passwords showup as encrypted. Is there a way to access the list, un encrypted?

thanks

I think I've got it to work somewhat.  I modified the 2checkout1 & 2 asp file to use and pass Product_id.  It now identifies the product correctly.  I'm good fo now. Thanks for the info though.

-Jason

I recently upgraded my ASPclassifieds from MS Access to SQL.  The application launches, I can browse existing catagories, etc. but when I try clicking on the login, guestbook, register or accessing the classifieds_admin,  I get the HTTP 500 - Internal server error.  Guessing this must be a folder or file permission issue?  Have tried changing IUSR permissions but nothing helps.

Please advise.
Thanks, lancem

The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.

But we changed it, it is back to normal.

Thanks

ASPProtect protects ".asp" pages only.

That is your problem.

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

The redirection feature isn't working as I exected.

If I clear a user's redirection_URL, they can navigate to any protected page on my website as expected.

However, if I set the user's redirection_URL to a protected page, they cannot login. More specifically, their browser just keeps displaying the login form while the browser's progress bar just increments ad infinitum.

If I set the user's redirection_URL to a NON-protected page, the user is directed to that non-protected page, but if they then try to navigate to a protected page, they are redirected back to the redirection_URL.

Is this the way the redirection feature is supposed to work?

My application requires that a user is directed to a protected page and from there, they can navigate to any page that they are allowed to go to.

What can I do?