Of course ASP.NET is and HAS been installed. I have been running asp.net scripts for years on it. I am not new to asp.net nor setting up the server or anything. ASP.NET is properly installed and works perfectly.

You are missing the fact i mentioned it is a DOMAIN CONTROLLER.

I have come across MANY articles ONLINE via GOOGLE that mention if it is a domain controller, for some reason the aspnet account is not there or gets deleted.

IN ITS PLACE GOES THE IIS_WPG ACCOUNT. IS YOUR SOFTWARE NOT COMPATIBLE WITH THIS ACCOUNT?

Is it possible to run ASP.NET scripts without ASP.NET not being installed? Because I have been running asp.net pages without any problem.

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

Are you reffering to the number of the left of the users name in admin.

I thought it was a counter at first but that number only displays the number of albums they have set up.

Thank you so so much! I went to the admin area and changed the email component from CDOSYS (using remote server) to CDOSYS (using port 25 forwarding) and all is working great now!

Again, thanks!

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

no, its part the concurrent login checking system.

currently when that is on logging off does not come into play..
(pretty much because it is such a complex system I wasnt able to make it quite that intelligent this time around)

when concurrent login checking is enabled the only way to log in again at another system with the same username and with a different IP is to wait till that time period is over

sorry

as you may recall it was rush feature at the last moment before I got version 7 finished. Hopefully I can improve on the feature in the next version but I dont really see it as being a big issue at the moment. Sometimes when you want maximum security you have to make some tradeoffs and that is why the feature is optional.

ASPProtect protects ".asp" pages only.

That is your problem.

When I designed the system I never really intended people to type in long descriptions for pictures

and if they did I assumed they would use the enter key once in while..

but I guess people dont do that

This thread is along the same lines and shows what someone else did about this..

http://support.cjwsoft.com/code/moreinfo99-1.htm

though they are talking about a different page its the same issue

I just did a quick google search... found a ton of info on how to find the setting. Here is one...

These are directions for IIS6 but the process is similar for IIS4-5

1. Click Start, click Administrative Tools, and then click Internet Information Services (IIS) Manager.
2. Double-click your computer name in the left pane, and then double-click Web Sites.
3. Locate the Web site and directory that houses the ASP application.
4. Right-click the application site or directory, and then click Properties.
5. Select Home Directory, and then click Configuration.
6. Click Options, and then click to select the Enable Parent Paths check box.
7. Click OK two times.

As an update to this thread I fixed the "upload_post.asp" page quite some time ago but forgot to post the updated file here.

So here it is.

2005-09-16_165913_upload_post.zip

ok, PM me some additional info so I can go look around.

I dont quite understand everything going on.

Let me know what to do exactly to be successful logging in and also...

Let me know what to do exactly to reproduce the issue and I will tell you what I think.

I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

The ASPProtect v7.x Documentation is now available as a download in windows ".chm" format. (needs to be viewed on a windows based machine that can read it) If you are using XP with Service Pack 2 follow the instructions below or you will not be able to view the help file.

Download Documentation

You should save this file and then open it.
Just opening it from download may not work and you will not be able to read it correctly.

Please continue to check the support forum threads for the most up to date documentation.


IMPORTANT
If your are using xp with service pack 2 there are some new security features that can block the access of help files you download. So as far as the ".chm" file goes.. you have to download it... right click on it...go to properties... then  choose unblock down in the lower right corner ...then you can open and view the file correctly

I am having problems with a password a user wants to use.  He wants HANNAH.  When he (or I) try to log in with his username and password, I get a syntax error  -

Syntax error in string in query expression '(Username = 'changedforsecurity') AND (Password = ' éG'.
pathOnComputer../1protect/check_user_inc.asp, line 114

I've obviously changed the username and the server path in the info above for security. 

I have not messed with the encryption.   

What is it that the system doesn't like in the word HANNAH as a password?  I would just change his password for him but this guy has enough trouble just turning the computer on!  Confusing him with a new password would take weeks to set him straight. 

Thanks,
Mick

Everything seems to work fine and I thank you very much for you quick response!!!

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

Login failed for user 'aspgallery'.

Okay, shouldn't this be trying to use aspgalleryuser?

Lance

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

again I will ask you what is the real error??

see the link above when I asked you the 1st time.
(I need the error details and line number.. etc etc)

and what kind of a server are you trying to run it on ?
you mention xp pro but in a confusing way ?

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

Thank you for the response to my question. In the mean time if I can figure any workaround I will post it here.

Actually, your whole site is like that.

http://www.bones.myftpsite.net/rfamilystuff/

You should definetly fix that..
I can't help ya with it though. You'll have to figure it out.

I know ya can do it...

later

well, assuming that function works and is vbscript not vb
(if it is vb code it may need some conversion work)

anyway

in "users/add_new_account.asp"

you would put the code for that function anywhere in the page.. it does not matter where as long as it is in code tags <% %>

then.. right under this part of the same page

If Zipcode_Postal_Code_Required = True Then
 If  Zipcode_Postal_Code = "" Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You need to enter a Zipcode_Postal_Code.\n\n")
 End IF
End If

add this

If Check_Postcode(Zipcode_Postal_Code) <> True Then
  ErrorMessage = ErrorMessage & Server.URLEncode("You need to enter a Valid Zipcode_Postal_Code.\n\n")
End If

No guarantees but that is the gist of it

Suprising I started this tread off on ASPImage, but I resolved my issue and forgot to change the thread topic.  I will try your suggestion.