Hello,

I do not really understand what you mean?
There are no country and city lists in ASPClassifieds.

Hi, I have not gotten anything from you about it.

click on the PM button below and send it that way through the forums.

Thanks

UPDATE..

Installed a new rack mount 1u server this week.

3.2 ghz hyperthreading 1 mb l2 cache prescott cpu
2 gb pf pc3200 kingston memory
SATA Raid.. (2) 120 gb drives running hardware raid 1

It is a supermicro 1u server case and server motherboard.
The hard drives are SATA 150 120 gb 7200 rpm Diamondmax Maxtors

All high end server type stuff... It's a very powerful server and has been running great all week. 500+ hours uptime so far.

Running Windows 2003 Server Enterprise
SQL 2000 Enterprise SP3
SmarterMail
SmarterStats
Windows DNS
ZipEnable (which I am reviewing for them)
ServerMask (which I am reviewing for them)
A ton of ASP Components which I have purchased over the years.

So that means I can now focus my attention on creating software again instead of being a system admin. (Due to these server issues over the past few months I am now back to godly status as far as windows system administration goes.. not to mention I am now back up to speed on the latest processors and hardware)

So, getting back to ASP Photo Gallery...

I spent about 20 more hours this week on the new version of ASP Photo Gallery Pro.. I have another 40 or more to put into it as I have a lot I want to do.

I think it will be ready within the next three weeks. I know a lot of you have been waiting for something.

Also.. if you want to customize each person's experience individually it really does not make sense to use groups or access levels for that purpose alone.

I mean, why bother making a group or access level for every user and worrying about keeping track of it all when you can just access the available session info about the user to create dynamic pages specific to that user.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=198& ; ; ; ;PN=1

That is why that information is there.


You can of course use some combination of the two technologies as well should you have groups of users that you want to have a slightly different experience.

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

Flash Code Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

http://www.banmanpro.com/support/flashgenerator.asp

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

I did not make a mistake.. what I typed is what I meant to say. I think maybe you are taking it the opposite way as I explained it.

Regardless,

What you want to do... logging them in under https and then having them continue though the site under http is not possible.

It doesn't work that. way. As far as the webserver is concerned https is a totally different site than http and each have their own unique set of application and session variables.

In a sense no different than www.somesite.com is different then somesite.com (each has their own unique set of application and session variables as well).

Now, because of the nature of Forms Based Authentication session varibles created under one will not carry over to the over and thus no password access if you switch over from a secure url to a non secure url.

If you want them logging in under SSL you need to keep them under SSL.

That is not to say there is some ultra complex scenario to mimic the session variables on the non secure side of things (possible with a complex http post to a non secure page from the scure page telling it what variables to create and set), but doing so means a ton of work and also has security concerns of its own.

Okay, this also shows at the bottom of the import/export page

I've got the IUSR account with modify permissions on this data folder as well.  Is the "this directory needs change permission" line just a general reminder?

Files are being stored in "D:\missourirealtor.org\members\aspprotect\data\export\\"

This directory needs change permissions for the anonymouse webserver account.
Those permissions can only be set by your hosting company.
These features will not work without those permissions being set.

no, its part the concurrent login checking system.

currently when that is on logging off does not come into play..
(pretty much because it is such a complex system I wasnt able to make it quite that intelligent this time around)

when concurrent login checking is enabled the only way to log in again at another system with the same username and with a different IP is to wait till that time period is over

sorry

as you may recall it was rush feature at the last moment before I got version 7 finished. Hopefully I can improve on the feature in the next version but I dont really see it as being a big issue at the moment. Sometimes when you want maximum security you have to make some tradeoffs and that is why the feature is optional.

ok, I just sent you a private message with download information.

replace you existing

"check_user_inc.asp"

"admin/check_admin_inc.asp"

"admin/email_user.asp"

with the new versions in the download

Do some testing to make sure that HANNAH password works ok for you.

Hopefully this cures the issue...
If it works ok for you for a while I will offer the fixes to everyone and start using this code from now on

BTW:
"admin/email_user.asp" had an unrelated bug in it that only happened if its error handling got triggered... it was posting back to the wrong page when that happened and causing an error

Ya, you must have tried to upgrade from a really really old version like you said which wouldnt really work out because those instructions are specifically for upgrading a version 6 database to version 7.

That line error you had was looking for the User_ID field and I bet the version you had was so old that you didnt have a field named that as a few years ago the field "ID" got renamed to "User_ID"

As for all the cool stuff... yup there is a lot of cool stuff in this version... glad ya like it so far

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

Chris -

Long time no talk, which is a good thing.  I have purchased another product from you, ASPVendor.  I am running into an issues.

When I try and remove the image through the image manager, it does not remove it.  Screen shot attached.

2005-10-19_194248_image_upload.zip

Thanks

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

I apologize if I've missed this, but I would love to see the ability to auto-e-mail the advertiser at some randomly set interval before the banner expires. Ideally, I would also be cc'd on this e-mail so I can stay in touch. If the advertiser wants to renew, I can receive payment and change the expiration date without their banner ever falling out of service.

Since e-mail is already built into the program, would it be difficult to add a routine that checks for expiring banners at some daily interval, and contacts the advertiser?

To get really fancy, the e-mail could include the ability for me to add a button for paypal, allowing the advertiser to easily click and send off another payment.

Best,

Wayne

Has any one used the aspmail function to send emails from within your site? If so what did you use as the AspMail_Host string in the connections database?

thank you

Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

Kurt,

There really is no default width in general.

The thing to remember is that the default.asp page includes a lot of different pages.. and some of those pages also include pages.

Now all of this gets wrapped by the header and footer include files so in a sense what you do there can effect everything inside to a certain degree.

Now there are some widths set here and there for different tables and what not on certain pages, but its really the kind of situation where you just have to dig around in the code and experiment until you eventualy find what you are looking for and get the desired result.

I'd love to tell you there is easy way to just set a width, but it is not that simple.

Maybe someday it will be. Just not in the current version.

CJW

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

It appears there is an auto logout after inactivity for a period of time.  How does one change the default time allowed for inactivity?

thx

Hello,

I need to see if this is possible. I want to create a browsing system such that, the user selects a Province from a drop down list on the main page. Based the selection, the username of all the users in that province will be shown. Then the user can click on a specific username and his/her portfolio (photo album) will be displayed.

is this possible? If so, How can I do this, please help.

Thanks

Sean

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.