I think you getting all confused about dsn's and what they really are.

A system dsn gets created via the ODBC control panel and gets listed there. A system dsn is nothing more than a registry entry telling information about where the database is an how to connect to it. Then every time code accesses the database it has to do a registry lookup. The whole process adds a lot of delays, causes very poor performance and is unnecessary.

A dsn-less connection simply connects directly to the database by specifying the driver being used, where the database is, and some other information like the password if there is one.

To get aspprotect or any other ASP application using a database all you have to do is make sure the database folder has correct permissions and then make a connection string like so. (with the correct info for your directory structure of course)

DBQ=c:\inetpub\wwwroot\aspprotect_6\data\database\ASPProtect _access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp

If you are wondering Access databases always use the same username.

So, basically if permissions are set correctly and the directory is valid it will work.
It is really that simple. 99% of the time when people have problems it is one or the other.

That being said, don't worry about the odbc control panel and what is listed there for connections. All we really care about is that odbc drivers are installed and somewhat current.


One last thign for reference: even if you do make a system dsn the database folder still needs the correct permissions.

UPDATE... on very very busy sites these methods have been reported to fail once in a while..  meaning .NET gets overloaded and instead of a banner its shows some error code.

its not the banner system .. its the .net engine and the calling method

This isn't going to help you much but here is the deal.

The 2checkout support in ASPProtect actually is not supposed to work with 2checkout subscriptions and therefore does not need to use an item number.

It is intended to be used for single payments only with 2checkout as explained in this thread.
http://support.cjwsoft.com/code/moreinfo212-1.htm

Single payments with 2checkout use their shopping cart which allows for dynamic payments without needing an item number.

I agree with you that 2checkout's interface is confusing. It's actually about the worst system I have ever seen. I could not make a 2Checkout subscription system because their system is just too limited and I couldn't make it work the way it really needed to.

Hello,

Sorry
No, there is not.

not the way the code ships.. The program keeps tracks of everything by the way it ranames files. The system has been tested to work well with as many as 10,000 images files. Any more than that and you need something a little more serious meant for that amount of images.

You could certainly modify it do work that way if you are good with source code. There are actually as many drawbacks as doing doing it that way as there are advantages.
Take Care

I understand the encryption for security, but I am using ASPP for a very low security function and don't want encryption.

Can't I simply delete the code that does encryption?

If not, how can I

take my ASPProtect_access2002.mdb that was opened on my local host, with my own users added with text passwords,

export to a delimited text file, import it into ASPP with my own passwords encrypted, the use that file instead of my old .mdb file? Thanks

Hi all

I logged in myself to my website, and I tried to log in to another with same username and password. But I was able to log in again.

It was supposed to block me from logging in, but it let me to log in.

there has got to be some configurations I must have missed.

Could you instruct me on this Concurrrent login so mine works as well...

thanks

Not really sure how to do this.... i think you know what i am looking to do.. is there anyway you can show me or create that solution for me? It would prob. take you minutes as its been taking me hours

The main root of your web site needs a "aspnet_client" folder for .NET apps like ASPProtect.NET to run.

If this isnt quite right one of two things can happen.

1.) You'll get a pop-up error like this.
'Unable to find script library WebUIValidation.js'

2.) The ASPProtect login screen will come up but just not let you log in.

This folder only goes in the root. Not in subfolders and subwebs.

If you dont have this folder in the root of your web.

Read this article to learn how to properly create the folder.
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/cpguide/html/cpconconfiguringaspnetapplicationforaspnet version.asp

If the app is installed on a hosted server you'll need to ask them to do that for you.

You can also try copying a the folder from your own machine after creating it the way the article above says.

or

here is a copy of my "aspnet_client" folder created under the latest framework at the time of this writing. v 1_1_4322

2004-11-03_134912_aspnet_client.zip

I am not sure if copying it in is as good as having created by the server as I haven't had time to really test all of that but it should work. Ultimately all this does is put some files .net needs in the web.

Your actually confusing me with the whole "joe bloe" thing and user access. I just do not get what you are trying to tell me. Perhaps you can explain in a less confusing way. Your just not technically explaining it andand thats what I need to know to possibly help.

As for the subweb thing you just can not do that. Subwebs have their own sets of application and session variables. An ASPProtect installation and any pages you protect with it are required to be in the same "application" in IIS. Sicne subwebs have their own "applications" in IIS that won't work. It is the nature of "forms based authentication" A sub web is alo considered by our licensing to be a seperate web site and ASPProtect is licensed per web site.

As for breaking pages.. you really shouldnt be editing any pages in the admin area as you will break them unles you are very good with ASP. (does not sound like you are..no offense meant at all)

Pages in the "users" folder are less complex and it is usually ok to edit them carefully.
http://www.powerasp.com/content/hintstips/common_sense.asp

Pages of your own that you password protect can still be edited in your usualy way though without effecting anything.

Truth is if you back things up before you start editing how can you go wrong ? That's how you learn.

I finally spoke with someone who knew what I was asking for and they set the rights and all is fine.

Thanks for your help. Wish all business' had customer support like here

yup. that is correct... they can't log in so they can't see any pages you protect

its the nature of forms based authetication

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

I purchased 6.0 in Feb 05.  Is there an upgrade price to 7.0

I spent considerable time setting up 6.0 to work with my web site. From what I read in the forum, it sounds like I have to start over again to integrate the new version into our web site. I do not relish the thought of that, but I have to move to an email system with a valid MX record.

Will I be starting over from scratch with this upgrade?

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

Okay, I did that, now I get:

Microsoft VBScript runtime error '800a004c'

Path not found

/aspprotect/password_admin/upload_post.asp, line 292

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

How can i get to this to register someone in the database only after the Paypal payment has been accepted.  I was testing it out to see if it makes it to my Paypal account (which it did just fine) then I closed Paypal before paying.  I logged in as the administrator and looked at the member list and the account was created anyway.  How can I stop this from being created until "only" after the Paypal payment has been "approved"?

What if this person never comes back to "try again"? Now the username he used (and is inactive) is not available for anyone else to use.  And it takes up database space.

I am using the Paypal (non-subscription)

Thanks in advance,
scottyFlasher

Hey, I run a business and I will not have things like that mentioned in these forums.

After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

Great software.

How easy would it be to copy the email address entered at registration directly into the login id field so that the user's email address is automatically used as the login id? 

Also, where in the code can I turn off the random password generator - I'd rather force people to pick something they can remember themselves.

Thanks,

Nick

do you have the smtp part of iis installed on your machine

cdonts needs that

then again I am not sure you can even use cdonts on a xp box without making some changes...

cdonts has kinds died out and as of windows 2000 basically got replaces by cdosys

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

I am confused.

Humm, how did ASPBanner 8 come with your purchase of ASPProtect ? That is not something I am aware of or something I do. Please provide more information on how you obtained ASPBanner 8. If I gave yu a copy for some reason please refresh my memory so I can go look up th emails about it. I need to know you have a valid license.

Now, as for the two not working together and the login screens messing with each other. I am even more confused. Tell me more as I just do not understand what you did ? ASPBanner has it's own user database and login system so there is no reason you should be mixing the two together as far as logins go. The two applications can certainly be in the same web together and not bother each other. ASPBanner can certainly serve banners to any pages you protect with ASPProtect or don't protect, but you certainly should not be protecting any ASPBanner code with ASPProtect code.  ASPBanner already has code in it to do that. If that is the case don't do that. ASPProtect is not meant to protect code that already has a login system. That should just be obvious as far as I am concerned and hopefully you dintn't try to do that.

(you said you just put the directory in there but there must be more too this than that)

But again, tell me more. I can't really know everything  ??

I just dont see how your ASPProtect pages could be effected by ASPBanner unless you really did something wacky like included the ASPBanner "check_user_inc.asp" instead of the one that comes with ASPProtect or overwrote it... etc ect

If in the same web aspprotect can be wherever and aspbanner needs to be in a folder called "aspbanner". There should be no conflicts under normal use and the two will essentially run seperate of one another.

I have narrowed it down.  The ../ for includes will not work with .asp files but will work in .shtml files.

any ideas?

hello,

There is no built in option. You would have to add code to do that.
Its not difficult but custimization like that is not something I support.

Just to let you know that i figured out my problem. I had to modify the connection in the email code and get the correct path from my provider.

I hope you enjoyed your vacation.

Thank you
Adam