It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

sorry, I am guilty of being very tired and didnt read your message fully.

I know this forum area is called "database connection issues" but it is only meant for generic issues.

Issues specific to a particular application need to go in that applications area in the forum. It keeps the forums more organized and helps other people fnd help later on.

So please post in the correct area.
I will answer this question soon. I have to do something 1st though.

You edit the web.config file that came with ASPProtect.NET.

You find this tag

  <customErrors mode="RemoteOnly" />

you change it to this

  <customErrors mode="Off" />

If you have a different web.config file in your root I suggest you make sure the tag is set to off there as well for troubleshooting sake

If done correctly you will get a detailed error
It's basic low level ASP.NET stuff really and does not have anything specific to do with ASPProtect.NET.

You also need to make sure your web is set up correctly for ASP.NET and that the correct web.config's are firing..etc etc

I had not rebooted after installing the Jet driver updates, so I tried that and the asptest page worked fine, and said that all the tests were successful and that the data connection was setup correctly. I then installed aspprotect again, but with the same results. I cannot log-in from the get_me_in.asp page. It still says that it is opening the page, but does not respons for an indefinite period. The asptest page is in the same directory.

I have looked for alternate databases for this product on your site, but I cannot seem to find them.

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

Could be a mod I guess - it would be nice to have an option on the admin settings page to lock down access of all pages and redirect to a specified  "lockdown" page upon attempted login.

If I'm updating the large files on the server and someone attempts a download, they'll get a partial ZIP file or an error.

If you are developing using Windows XP Pro and running the NTFS file system setting proper permissions on a folder in your website requires that you 1st disable simple file sharing.

To do so open up "my computer". At the top open up "tools/folder options"

Then the "view" tab.

Then at the bottom uncheck "use simple file sharing"

After that that is done... using "my computer" browse to the folder in your web that you need to set permissions on.

Right click on that folder and then choose the "security" tab.
(If simple file sharing is on that tab wont be there)

Give the "Internet Guest Account" Modify Permissions
This will check all the boxes under modify as well.

You can also give permissions to the everyone account and accomplish the same thing.



BTW:
If you are using ASP.NET you need to give permissions to an account called ASPNET. It wont show up in the user list. You'll need to click "add" and then type in "ASPNET"

The only major usability issue I've found to date is multi-zone banners. Cloning is helpful to a point, but then if you have a change to that banner, you have to make the change 6 times or what have you. I think, even at the expense of speed, multi-zone capability for a single banner would be excellent addition. Of course, that supposes I haven't just missed it and it's already there.

Are there any problems with modifying the default database fields.

I need to have an update from net billing and they use different settings in the database than the default.

Will the interface still be functional?

We have a site that currently runs ASPProtect and would like to install a second instance of it.  The reason is that the current one is set up to manually authorize new users (it is for applying discounts to the Trade), but we want a second instance that will allow new users to register freely (this is for personalization). 

Has anyone set up such a goofy scenario themselves?  Is this even possible?

Thank you!

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

I've encountered another problem.  When i edit the link for existing banners and save it, the banner reverts to the old link instead of the new one.

The directory where the the database is located to rwed so the permissions is not a problem.

Any advice?

Thanks

Hello,

VBScript is the most popular ASP scripting language, and has the most support available. I estimate that less than 5% of the ASP coders out there use anything other than vbscript

That being said it specifically says on the aspprotect site ASPProtect is only for use in protecting asp using "vbscript" as the language.

http://www.aspprotect.com/more_info_full_v7.asp

http://www.aspprotect.com/comparison.asp

it is something I specified very clearly for this very reason.

Sorry, but you can not use ASPProtect to protect pages using Language="Javascript". The code is too complex to be mixed with server side Javascript.

To password protect asp pages written using "Javascript" you really need a an application specifically written in and designed to work with ASP pages written using "Javascript". And then of course that application would not be able to protect ".asp" pages written using "vbscript." (I mean never say never, but it would be a ton of work to get both working and I doubt you will ever see a commercial application that does both)

as for switching back and forth between vbscript and javascript you really can't except with very simple code. Doing so with anything complex can be extremely problematic because the order of execution sometimes gets all mixed up because of the complexity of the code being used.

That doesn't mean it can not work....

You would really want to do something like this.


do not specify a default language at the top

surround the aspprotect include file with this

<SCRIPT Language="vbscript">

</script>

surround your javascript code with this

<SCRIPT Language="JavaScript">

</script>

then make sure none the code including the aspprotect include file has any <% or %> tags in it

that means you have to remove that sort of thing everywhere... that means a lot of work if you used a lot of that sort of thing instead of response.writes to write out html type stuff

and again... I don't know if you would ever get it all working

I have sent an registration email (as test) to both a yahoo account and also my own email server and in both cases I get the same issue, all else is working great. I am sure its somthing simple, perhaps I am over looking somthing else. the site url is www.rochestertek.us/asp/users/register.asp if this helps

Again thanks.

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

That's exactly what it was.

The site owner couldn't see their own ads because Norton was blocking anything with the word ad in it.

On another note: I changed the word 'ad' to 'listing' and got it to show even with Norton.

You can mix and match banner calling methods all you want.
Try it and see what happens.

However, the only method that is going to work on non ".asp" pages is the javascript or the new iframe method listed in the support forums.

I would look on the pictures folder on the server and see what is there for pictures. Also, when you see a broken X on the site right click and see where it is trying to get the picture from and what the pictures name should be.

I would also be sure to clear out your temporary internet files in IE. clost and restart all browsers..

maybe show me the site ? so I can see this happening ?

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

I hear ya.. problem is it just does not fit into the banner rotation logic.

I know it sounds like a simple thing, but it is not because ASPBanner does it's rotation logic in a totolly unique way that no other system I know of does. It basically does everything in memory.

I just don't see anyway to do add what you are asking about without totolly re-writing how it works. The system would have to rely totally on complex (SQL queries / stored procedures) to do the banner rotation like every other poorly performing system out there.

It's really hard to explain, but I just no way I see to add it to the high performance application variable banner logic.  If I changed the system to not use those application variables there would be a tremendous performance loss because the database would be doing about 90% more work than it currently does.

As I have said before sacrificing performance is just not something I am willing to do.
http://support.cjwsoft.com/code/moreinfo144-1.htm

I built ASPBanner for performance and speed and that has always been it's main intention.

I leave the bloated features to the competition. If I lose sales because of it that is just unfortunate. I want the best performing system. The system I can be proud of. The system that can handle millions of impressions per day under a MSSQL or MYSQL installation and not even flinch. That is what ASPBanner is all about.

The other thing is pricing. The price is kept low partically because the feature set is low.

Maybe someday there will be a version with more features and less performace. I really do not know. Right now it's just not something I plan on doing.

Hi

I would like to ensure the the user uses a UK style postcode not a clue how to ensure this as I am new to asp. Any ideas?

regards

John

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

ya, thats basically what I was gonna do..

BTW.. if that other app is going crazy with an access database it could be the cause of all the slowdown with ASPProtect... what happens there is it is using so much database driver time that it robs other things that also access a database... so basically ASPProtect isn't asking its database for much but your other application and database are cripping that part of the system and causing it to run like crapola

If your other app is using a system dsn try changing it to use a dsn-less connection... it might actually help

ok... lets forget about all this redirecting business for a minute

when I go to "GP01.asp" directly via your web site I get a big nasty error that says this

Microsoft VBScript compilation error '800a0411'

Name redefined

/protect/config_inc.asp, line 15

Dim  Address_Required,CDONTS_Installed,City_Required,Registration _Type,VerifyURL,Log_Off_Page
----^ 

then when I look at what you did in that file I see why

you have this code which is totally wrong because you cannot include the password protection file twice

<%@ LANGUAGE="VBSCRIPT" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->
<% GROUPACCESS = "*1*" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

it should be

<%@ LANGUAGE="VBSCRIPT" %>

<% GROUPACCESS = "*1*" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

and that is probably the root of this entire problem.. the redirection was working...
but you were sending them to invalid pages with errors

all those pages are wrong...

if you dont see the real error above see this

http://support.cjwsoft.com/code/moreinfo11-1.htm

if you look over the aspprotect 7 installation instructions that is the very 1st thing I tell people to do

hopefully this is the info you need to continue and get some work done

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

The company that hosts our business web site has been impossible to deal with in assisting me in getting asp protect to work. Getting the rights set correctly took 6 days and then getting parent paths enabled has been impossible. There last response was simply this:

The includes were changed so that if your server does not support "parent paths"
' and the "../" that you could easily change a few files like this and make the
' includes virtual includes instead of file includes. We didnt make them virtual
' includes by default because depending on where in your site you put the application
' the virtual include path would be different. They are also much different on a local
' development server than they would be on your real server
'
' Here are some examples of what you might change these includes to
'
' If you put the aspprotect folder in the root of your domain at your server
' example: www.mydomain.com/aspprotect
' then you would probably use
'
' #INCLUDE VIRTUAL="/aspprotect/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/config_inc.asp"
' #INCLUDE VIRTUAL="/aspprotect/scripts/emailing_subs_inc.asp"
'
' Or if you didnt use the aspprotect folder and just put the contents of it in the root
' of your domain
' then you would probably use
'
' #INCLUDE VIRTUAL="/dataconn_inc.asp"
' #INCLUDE VIRTUAL="/config_inc.asp"
' #INCLUDE VIRTUAL="/scripts/emailing_subs_inc.asp"
'
' It really all depends on what works for your situation
' If you want more information on server side includes read this article at PowerASP
'
' http://www.powerasp.com/content/code-snippets/includes.asp

I am assuming that they will not enable parent paths and I need to modify some code. I do not know asp. WHere do I modify the code for a server that will not enable parent paths?

Thanks,

D

Ohhh...

I was thinking it worked like this; A user goes to that page and logs in.. and from there they can then browse the site and do what they want..

So in order for it to work i need to edit a page say... members.aspx (i assume it needs to be an asp.net page) and in the header put that protect code and when a user accesses it, it will prompt them for their un and pw and then if correct will allow them to view the page... and likewise if they are still logged in will be able to use the page?

If that is how to works as i mentioned above thats great...

I understand the redirect principle...but say i have a log in box on the main page... you know like most pages have a user log in on the left hand side... i wanted to do that. But i cant obviously protect the main home page or else normal users will not be able to view it without logging in or registering