Running in parallel for testing is actually a smart way to do it, but the truth is you don't use anything from version 6 except the upgraded database (we have a tutorial on how to upgrade the database)

Version 7 was a drastic change /rewrite to all of the asp files that come with the application. So you will be starting out with fresh version 7 ".asp" files and folders... You will also find that once you get version 7 running that editing certain things like the look of the users area and the login screens is much easier to do.

That being said any of your own ".asp" pages that you protect use the same protection code they always did, so there will be no drastic changes needed there when you do finalize the upgrade.



If using MSACCESS as the database I suggest installing the application somewhere in your web and using a fresh ASPProtect 7 database. Once you are familiar with the setup and everything is working fine. Attempt the database conversion and when your done stick your converted database in there and see if everything is ok.

Also, if you already purchased the application download the latest version before doing the install. It's the same download URL. If you don't have it email me and I can hook you up. I have added some new features and fixed a couple minor things since it's release.

So far the feedback on version 7 has been awesome..

Good Morning - I getting errors in my system log that says "404 file not found" for a number of files - Here are a few examples:

/aspprotect/password_admin/ drop1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ drop2.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181	4	0.28%
/aspprotect/password_admin/ left1.gif http://cidra.easycgi.com/ aspprotect/password_admin/edit.asp? User_ID=181

I ideas on how to fix this?  Note: The system seems to be working fine, but I want my log files as clean as possible. 

Thanks.  shirley

Chris -

Sorry, I am looking at your code on view_item.asp and I have noticed that you are calling 3 variable; start_date, end_date, and image_url that do not exist in the databases that you provided.  Do I have the updated package for ASPVendor?

I'm using ASPimage and have the maximum width set to 320 in the settings.  Also using SAFileUP ver. 4.0.

Files upload okay, and the script displays a confirmation that the image was resized to 320, but the actual image uploaded is displaying full size rather than reduced to 320.

Also, the thumbnails are not displayed in the Picture Manager. Would indicated ASPImage is not working or the script is not communicating with it.

Suggestions?

Actually it would because you would just count records for that user that are also active

and yes, users cant delete albums.. they can only turn them off which really means the albums lose their active status

only the admin can truly delete an album the way the code is
(that's just the way I did it for some reason.. I don't remember why)

rrabago

I have been looking over the code and also doing some tests.

So far everything in the code looks correct and everything I have tried has worked correctly. If I select an access level and active users it is not sending emails to inactive users as you stated.

Are you using the option pack ?

I log all 404 errors on my site and since installing ASPBanner, I get a lot of the following error:

/aspbanner/edit_banner.asp?Banner_ID=11&User_ID=1 contains a broken link:

/aspbanner/right1.gif

ID changes and there are various missing links.  Some missing links include:

/aspbanner/drop2.gif
/aspbanner/left1.gif
/aspbanner/right2.gif
etc.

While not critical, these are filling up my error logs and it takes time for me to sort through them.

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

That being said, ASPIN has a lot of problems with anonymous reviews so if you can please sign up with them and post an Authentic review as they carry a lot more weight. Authentic reviews involve responding to their validation email so when doing so use a real email address that you regularly check.

And sorry I made you use the forums, but as you can see this is exactly the sort of thread that will help someone else later on.. and that is why I require people to use the forums now instead of just email support. That way the conversations are out in the open where they can help everyone instead of buried in my outlook where no one will ever see them. And of course if information is sensitive you can always do a Private Message as you did earlier.

It is all about creating a knowlegebase of valuable information.

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

Humm, Did you change something in a bad way? Thats my guess.

I need more information on what is going on because by default it does not do that ?

The only possible way I can think of that could cause that is if you changed things around too much and the config_inc.asp file is getting run/included twice on that page your logging in to.

Also, when you sign in "where" ? What page ?

MySQL Database Setup

Use of MySQL is 100% unsupported as you can see from the site.
http://www.aspbanner.com/mysql.htm

Even still I recently had an encouter with an extremely Jerky person (read the thread above for more on that) and because of him I am adding this tutorial showing one way to set things up on a windows server using the official MySQL tools available.

Let me just say as well that there are 100's of 3rd party tools to work with MySQL databases and many ways to create the database and apply the database creation script. In the past it had to be done via the command line, but now there are a lot of visual tools you can do it with. Furthermore all hosting companies set MySQL up differently and give you access to varius interfaces to manage it which are all different, and that is primarily why I do not support it. How the hell could I support all those different interfaces many of which are totally custom?

The fact is 99% of the people that purchased ASPBanner to use with MySQL have done so without issue and love how it runs. Regardless here is how I set up a working MySQL database on a windows server proving it does indeed run with a MySQL database.

1st of all if you are setting up the server you need to download some things from http://www.mysql.com/ 
(btw: you local developers can install this on XP Pro as well if you like.)

For this article we are going to download the current non beta windows version of MySQL which is 5.0. ALso known as the Windows Essentials (x86) download. It's about 17 meg.

Because ASPBanner uses the MyODBC drivers (now called Connector/ODBC) to connect to the MySQL database you need to download those as well. (Our site flat out says this is required for MySQL use)

So I download those from here. http://dev.mysql.com/downloads/connector/odbc/3.51.html
Version 3.51 has been the current version for a couple years now.
You want the windows driver install which is about 2 meg.

The two downloads should look like this.



Now, on the webserver you run the version 5 setup (mysql-essential-5.0.19-win32.msi) I will guide you through it step by setp.



Hit Next



I am going to choose typical for the sake of this article.

Hit Next



Hit Next



Wait for a bit



I skipped this part.



Choose to configure the MySQL Now

Hit Finish

Hit Next

I am going to choose Detailed Configuration



Since I am on a development machine for this install I am going to choose Developer Machine. For a Real Server choose one of the server options.



For this article I am going to choose Multifunctional Database: You may want to pick one of the other options. That is up to you. ASPBanner will work under any of the scenarios.



I am going to leave the location at its default

Hit Next



Since this is a development machine these options are fine.

Hit Next



These options are fine as well.

Hit Next



Standard is fine for my development machine.

Hit Next



I am going to choose both of these options. The 1st one is Important and should be enabled on a real server so MySQL always runs. The 2nd is not so important.

Hit Next



Set the "root" password and do not forget it. You will need it to manage your MySQL server. I do not advise creating an anonymous account unless it is a development server and you just do not care. Whether you enable root access from remote machines or not is up to you so do some research on that. For this articles needs I am not choosing it.

Hit Next



Hit Execute and wait



If all goes well you will see this. (I actually got an error message about not being able to connect... I went to to Administrative tools/services and restarted the MySQL service and hit retry which cured that... it probably only did this to me since I have installed this before.. new installs probably will not have any trouble)

Hit Finish

Your done.. You just installed the MySQL Server (TIP: its usally a good idea to reboot and make sure the MySQL servce is running by default)

Now, moving on..

Lets install the MyODBC drivers.. (now called Connector/ODBC)

This one is a bit of a no-brainer so I am not going to go into detail.
Just run (mysql-connector-odbc-3.51.12-win32.msi) and run through all the defaults until it is done.. Choose typical when that comes up.

Your done setting up MyODBC on the server. If its not your server I guess you don't need to worry about installing all of this as its your hosts job to do that.

I would check out this article for starters... aspprotect is very similar to asp photo gallery and so are a lot of the page names.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=49& PN=1

Jeromy, You should have access to that page.

Hi Chris,

We installed our key onto the live server.

However, since our temp key has expired, we can't access our application on our development machine because the login won't work anywhere except on the live server.

Of course we can access the application on dev, if we remove the aspprotect tags, but if we need to log in to do something unique to the user, then we have a problem.

Can we get another temp key from you? And would there be a better long term solution to this debug/maintanence issue?

--JP

1st off, what application is this in reference too?
This question should be under that application's area in the forum.

2nd, really need more information and details. There are many ways and methods to send emails and they can all effect what gets delivered and what does not. All on an email server side of things. (I always recommend using the CDOSYS option using SMTP authentication with a real external email that has valid MX records) see my article...
http://www.powerasp.com/content/new/sending_email_cdosys.asp

3rd, your not telling me how many users we are talking about. ASP is not a very efficient way to send emails and extremely large amounts of users should be sent emails in a different way then from an asp application. It is just the nature of the technology being used. Some of different emailing methods the application supports may or may not give you better results. It is really best to experiment though honestly the option I mentioned above is always the best in my experience.

4th, if you are not getting a timeout or a scripting error than the ASP part of things is making it through the amount of users. You have to remember that often time emails that get sent out from web sites end up in junk filters for whatever reason. That is just another fact and why it it is usually best to send out serious newletters using a stand alone application like WorldCast or something.

I am doing a lot of guessing here because you really did not tell me much. I also still am not sure what application this is in reference to as 3 of my apps have newsletter features of sorts.

We are emailing a weekly newsletter via the Newsletter feature.  Many clients complain that they are not receiving the newsletter.  The emails are not bouncing back indicating that they possibly are not being sent to begin with. 

Is there any way we can determine if ASP is making it through the entire database of subscribers?

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

Yeah, its a win2k server.

Im up and running now (my guess is ASP wasnt installed, but he did not say), but am not having luck with any of the email.  I contacted my host to see what is available and have yet to hear back.  Do you generally recommend people to run CDOSYS?

Ive been reading through the docs, and the users and protection seems to be pretty straightforward.   Nice!

The only other real question I have (and cant find in the docs) is how to remove the self registration option all togehter.  My client wants to add its users manually, and not give the option for them to sign up themselves.  Do I just find any remove any code that references it?

Our webhost changed converted all sites from c: to d:, and without us doing anything else, our customers now get the following error message when trying to access our Classifieds site:

***********

Microsoft][ODBC Microsoft Access Driver] Not a valid password.

This means there is most likely a problem with the "ConnectionString" info that you specified.

If you are using a DSN-Less Connection with MSACCESS.

Check that the physical path to the database has been specified correctly.
It has to be perfect and correct. It cannot be specified using "http://" or by using "server.mappath".
It has to be specified like the following example.

ConnectionString = "DBQ=D:\Inetpub\wwwroot\advpass_pro\_database\passwords.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=admin;PASSWORD=Xpass"

If this is running on an NT server or Win2000 Server make sure that permissions have been set on the database.
Only the server admins can do this. If you are not the admin you will have to ask for this to be done.

If you are using a System DSN

It is not set up correctly. Again, make sure the permissions have been set for the database and that the system DSN has been set up correctly by the server admins.

************************************************************ *********************

We did everything the web host asked us to do, that is, changed all references to the C drive to new references to the D drive, but the error is still there.  We also never changed any passwords (as far as we can remember).  Can someone please tell us where to look (also which file might tell us what the correct password is in case it has in fact been changed.

(User Photo Upload Mod) for ASPProtect Version 7.x

This will allow an individual user to upload a user picture instead of just the admin.

Notes: This is a down and dirty mod. The user upload code was copied from the admin area and there are no safeguards. Meaning there is no limit on the file size a user uploads and there is no confirmation process in case something they upload is inappropriate. etc etc etc

If you want that you will have to work on that on your own.

Directions:
Back up your existing ASPProtect installation.

copy these files into your "users" folder

2006-01-24_111305_User_Upload_Mod.zip

I guess i am not being clear as to what i am trying to do. As far as the event thing... lets hold off on that for now. It seems Chris has answered my question and i am on my own for that one...

As far as the log in goes: I went to that site you mentioned;www.CafePress.com to see if they had what i was talking about. and they do. Notice on the bottom of the page it says "sign in to your account"

I want that option on my home page where users can sign in to go to their account. It will either take them to a page where they can update their info, or it will take them to a protected page. Pretty much instead of posting a link on the site to say... click here to go to members.aspx and have it return an "access denied" the user can enter their info from the main page and be automatically re-directed to that members.aspx page.

I know how the viewstate works and i also know what that returnURL thing does..pretty self-explanitory.

Hopefully that makes things easier. I just want a user to log in from the homepage and be redirected to either a protected page or their account page...

(as does that cafepress website)

Hi Chris,

Thank you for your prompt response.

Our current project requires alot of customization.

Yes, the error is probably a data problem and not due to your code, because we needed to make modifications to the database.  But that's why debugging would be helpful.

Basically our intent to modify the asp protect code stems from the fact that our client doesn’t want certain fields to be recorded or to appear: address, city, state, zip etc…

We are happy to be able to modify the HTML, but we also want to modify some other default behavior, such as which page opens when the "cancel" button is hit in the editaccountinfo.aspx page.

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

Christopher

Thanks for a speedy reply.  This is what I have used most recently...

ListingsConnectionString = "DSN=longreach;UID=lradmin;PWD=skipper;"
DatabaseType = "SQL"

but that throws an error of:

 [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

I have private messaged you my SQL server IP address.  I am a fast learner with ASP (I think!) but some things really catch me out!

... in addition it is a virtual include not a file.  I just tried to use file instead of virtual and then the ../ includes worked on the asp pages.

This is strange because they used to work like that on the 2000 server I had these sites running on.