LOL

Or at least I think so.  I have been trying to get this software to work so I can see if it meets our needs for an upgrade purchare. Here is my error.

Microsoft JET Database Engine error '80040e10'

No value given for one or more required parameters.

/aspprotect/scripts/populate_config_variables_inc.asp, line 15

My provider says that the problem is NOT on there end, that it is a problem with the code.  I think that it is a database connection problem.  Can you please help.  Below is my connection string based on what the setup page directed me to do:

ConnectionString = "data source=\\NAWINFS03\home\users\web\b1347\rh.957theride\asppro tect\data\database\ASPProtect_access2002.mdb; Provider=Microsoft.Jet.OLEDB.4.0;Jet OLEDB:Database Password=temp"

When I first set up the program I got this error:

Provider error '8000ffff'
Catastrophic failure
/aspprotect/scripts/populate_config_variables_inc.asp, line 11

Once again, the looked into it and said the permissions were fine and that the code was most likely bad.  But then the errror changed to the one that I first listed.  Which is the one I am currently getting. 

BTW here is the page address

http://www.957theride.com/aspprotect/password_admin/get_me_i n.asp

Thank you!

Thanks.

Nick

Hello,

I do not really understand what you mean?
There are no country and city lists in ASPClassifieds.

Still not ready... I have no time to finsih it at the moment..

release date is unknown...

and the permissions, how exactly were they set ?
I find a lot of customers think they are setting permissions correctly when they really are not. That's why I wrote that long article on the subject.

As you probably know a data connection is a very low level thing. It is the foundation of any ASP application that communicates with a database. Unfortunatly it sometimes takes a while to get the hang of setting them up without issue.

Everything must be perfect.. the ODBC drivers must be up to date, folder permission are critical, sometimes you must use a new version of the access database.. etc etc etc  The errors and things that happen when all these things are not perfect and not helpful as you have found out.

I would suggest you download and get ASPTest from CJWSoft running before you go any further. It is designed to be as simple as possible and helps get a hang of the database setup process.

I have a customer who is asking the following:

... could you make a link from it to our website and is there a way to see what traffic goes from us to them.  They are going to pay a commission on sales, however I need to be able to track who views their site...

Wishful thinking or could you add code to track their IP address and display in the report section?  Not sure that would be enough to satisfy this request.   Suggestions?

Thanks, Lance

I really do not know to tell you the truth. I'll do some research.

The script only allows .jpg, .jpeg, and .gif extensions.

If someone uploads a file called... "filename.vbs.jpeg" with bad vbscript in it I seriously doubt anything can happen because of it because of the extension.

But I really do not know.

It has never happened to any sites I have or know of.

it's ok

one step at a time and at each step testing things.. then when you mess something up you can figure it out a lot easier

Anyone have any experience configuring PhotoGallery to use a backend mySQL database?

The application connects successfully for Read operations, but no amount of troubleshooting can get it to Write records to the tables.

http://www.marc-lisa.com/photos/default.asp

I purchased two site licenses for ASP Protect a while back and am now trying to implement the application.

The connection to the database is fine, because it recognizes the user and displays the user name.  However, there must be a problem with the permission because I get the DNS error information from the On Error in the check_user_inc.asp file.

I set the permissions on my PC as you indicated, both on the folder and the database file.  But get the error and cannot access the database to view or modify.  I also uploaded the file to my web server and set the permissions as well, but get the same problem.

You mention on your forum that it is not the code, but I don't understand if the code is correct and if it finds the database and the permissions have been set as you indicate, why doesn't the code work?

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

It's seems to work fine after renaming the file, rebuilding the application, and editing the web.config file to point to login.aspx. It looks like I can use your fine product and thanks again for the help. It was unusually easy. Merry Christmas…

I hear ya.. problem is it just does not fit into the banner rotation logic.

I know it sounds like a simple thing, but it is not because ASPBanner does it's rotation logic in a totolly unique way that no other system I know of does. It basically does everything in memory.

I just don't see anyway to do add what you are asking about without totolly re-writing how it works. The system would have to rely totally on complex (SQL queries / stored procedures) to do the banner rotation like every other poorly performing system out there.

It's really hard to explain, but I just no way I see to add it to the high performance application variable banner logic.  If I changed the system to not use those application variables there would be a tremendous performance loss because the database would be doing about 90% more work than it currently does.

As I have said before sacrificing performance is just not something I am willing to do.
http://support.cjwsoft.com/code/moreinfo144-1.htm

I built ASPBanner for performance and speed and that has always been it's main intention.

I leave the bloated features to the competition. If I lose sales because of it that is just unfortunate. I want the best performing system. The system I can be proud of. The system that can handle millions of impressions per day under a MSSQL or MYSQL installation and not even flinch. That is what ASPBanner is all about.

The other thing is pricing. The price is kept low partically because the feature set is low.

Maybe someday there will be a version with more features and less performace. I really do not know. Right now it's just not something I plan on doing.

you dont want to use the virtual smtp virtual server method... you want to use a real remote email server with valid MX records..

ultimately though after all that is going is it is out of the hands of the asp code and it becomes issues other then the code sending the email... regarding to whether or not emails get blocked by certain organizations

For example:
I have many aol users sign up for various systems I have running without issue. I use CDOSYS with my own server mail.cjwsoft.com which has proper MX records set up.

I would also try to determine the difference between blocking and spam/junk email filtering. It is impoirtant to truly know what is going on.
Sometimes adding more information to the body of the emails going out will eliminate the junk mail filters from gettings the emails.

Then you have the various open relay lists that places like AOL use. If your email server or IP sending the email is on those lists for spamming you do not stand a chance. That is all out of the hands of the ASP code.

You can't unless you plan on editiing and custimizing the code.

The application is only designed to have one kind of admin and that kind has full access to the admin area.

You can of course give any user access to stats for their banners via the bannerstats page.

That is how it works. There are no other levels of admin access.

On second thought guys, it would must easier to change the code using modulus as follows:

<% If PicIndex mod 6 = 0 THEN %> 
      </tr>    
      <tr>
<% End If %>

This will end each row and create a new row after each 6th picture. It'll be must easier code to work with and change.  This code must be placed in the PicIndex For Loop.

If you have any questions, JPortnoy@Checkernet.com

False alarm. Dumb user alert (both the classifieds customer and me).

When I test fixes, I need to be looking at the right Ad_ID to get correct results

Thanks.

clark

The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.

But we changed it, it is back to normal.

Thanks

If we wanted to user groups, is the "Access Level" in the User setup the same ID as what the group access would be?  Ex. If John had Access Level 4 and the page specified <% GROUPACCESS = "4" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

I'm asking because there is no Group Access Level in the user setup.  Thanks

YES.. you need to edit your SWF file to link to the aspbanner system...

example.. the link may look something like this
http://banserver.powerasp.com/aspbanner/banner_redirect.asp? Banner_ID=60

of course you need to put in the right information for your site and whatever banner ID it is in your system

Like it says above.. if you save the new banner at least once and then come back to edit that link will be generated for you at the bottom of the edit page.

then when your flash banner is clicked on it will go track the click and then send them to the "link_url" specified for that banner when you edited it.
(you need to enter the final destination url there if you want that to work)

Permissions and Folder Locations

By default and to keep things clean we store everything in folder called "data"

That folder then has it in 4 sub folders

database (where the .mdb and temporary .ldb files are handled)
export (where the aspprotect export files are saved)
logfiles (where the aspprotect logfiles are saved)
user_pics (where the user pictures are saved)

Doing it this way makes it very easy for a system administrator to right click on one folder and set permissions for that folder and all of it's child folders.

Now, that being said.. you do not have to use these folders.

For example if you already have a folder in your web with modify permissions for the anonymous webserver account then you can use that one folder to store all of the 4 things above.

You'd simply edit your data connection string to point to that folder and then edit the other paths in the settings area of ASPProtect.

We did it that way so you would have options in case your hosting company was being difficult with your ASP hosting needs.

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

The Double DIM needs to be removed for this code to work properly.

<%
Dim BannerZone, BannerConnectionString, BannerDatabaseType, ConnBannerSystem
Dim CmdCheckUser, CmdGetConfiguration, App_Name, Config_SQL, BodyTag, BanDataConn
Dim CmdBannerTemp, CmdGetZones, ZoneString, ZoneArray, ZoneIndex, CmdUpdateWaiting
Dim CmdUpdateExpired, CmdRetrieveImpLimitedAds, CmdRetrieveImpressions
Dim CmdUpdateImpHit, CmdRetrieveAds, CycleBannerTotal, CycleList, NewCycleList
Dim Dim LoopBanner, CycleLoop, CycleListArray, CycleListArrayIndex, BannerCycleData
Dim Banner_Array, CurrentBanner, NewCycleListArray, Banner_Array2, LocationIndex
Dim Stop_Processing, Keep_Processing, CmdUpdateStats
%>

ASPProtect Version 7
Expiry Notices go out to members who have recently renewed by subscription.

When an existing member from ASPProtect Version 6, with an expiry date, renews with SUBSCRIPTION in v7, the previous expiry date remains unchanged.
We assume the expiry date remains blank with NEW Subscriptions and that Paypal takes care of notifications.

 But our notifications to the "about to expire" dating from v6 catches the "Renewed by subscrtiption" as well, as the date has nor been changed or removed, and this REALLY confuses our members.

Can this be resolved?

Tell tell me some info about your install?

How am I supposed to know what is going on when you are not showing me what you have in your web config file and also the directory structure of the install or what you are putting in a page you are trying to protect ? It almost sounds like you are not editing the paths correctly in the various places.  I mean yes you told me something about the "map" folder but what I saying is tell me more detail.

BTW: this is a very important setting in the web.config file and must be edited accordingly so the path is right.

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

Basically your showing me random errors and posts left and right and I honestly have no idea what your doing ?

Ulitmately though I am trying to help you in this situation like the web site says.

We offer tech support for installation of the base application purchased in it's native form. In some cases in order to receive proper tech support your application will be need to be installed on a live server on the Internet. We simply cannot troubleshoot all issues when the application is only installed on your local machine.

Meaning I am not going to keep this up if you keep asking question after question after question regardign your local XP Pro installation. There is only so much I can assume or guess when you are running this on a local development server. I know you got all sorts of problems getting a decent live server to run this on but that just isn't my problem. Get this up and running on a professionaly and correctly setup live server and when these random configuration errors pop up atl least I can go run the pages and look at them. Right now I am just confused by nearly everything you have posted today. Half of looks like basic ASP.NET path issues that you need to sort of on your own based on where you installed the application on the machine and what you have in the web.config file.. etc etc etc

It is sounding more and more like ASP.NET is way over your head. If you want a copy of the classic ASP version of ASPProtect you are welcome to it. I think you will be a lotter better off sticking to classic ASP unless you really start reading up on ASP.NET and learning more about how forms based authentication and the web.config file work.

Sorry, there is not any documentation on that.. it is basic asp/database work and customization like that is not supported. I recommended looking at what is already there and using that as a guide to produce more fields. etc etc

Chris.

After I had you install ASPProtect I added the ASP protecting code to the top of my home page:

<%@ LANGUAGE="VBSCRIPT" %>

<% CHECKFOR = "1" %>
<!--#INCLUDE FILE="../../check_user_inc.asp"-->

Then I made my index.html page my login page buy using the script "Login form on a non protected page" on that I changed <form method="POST" action="memberarea.asp"> to <form method="POST" action="home.html">. 

When I try to log on to that page I get en error page HTTP Error 405 - The HTTP verb used to access this page is not allowed. Internet Information Services (IIS). I checked with my hosting company GoDaddy.com and they informed me that due to the fact that they do not have ASPProtect instaled on there systems they can not support it.  In recent conversations you told me that you have customers that do use godaddy and you products. 

Can you please tell me what I can do to get this working?

Thank you for your time and help.

You can also try setting asphttp's user agent property to some browser version like in this example. It might stop that info from showing up when it fetches a page from the server.

<%
Dim BanObj1Http
Set BanObj1Http = Server.CreateObject("AspHTTP.Conn")
BanObj1Http.UserAgent = "Mozilla Compatible (MS IE 3.01 WinNT)"
BanObj1Http.Url = " http://banserver.powerasp.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=1"
Response.Write BanObj1Http.GetURL
set BanObj1Http = nothing
%>

Also... I dont know if these values below will work but I got them from looking at my nt logs.

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)

Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)

And here is more info on the asphttp component and it's settings.
http://www.serverobjects.com/comp/asphttp3.htm

Thought this would be easy.  A few more pointers should get the database connection to work:

1) How do you decide whether it is a DSN (system datasource) or not? Does just putting the file in the ODBC make it so? 

2)We have other files in there for other server applications, does that mean we’re stuck using DSN’s or is the file independent of that control dialog?

3) Assuming we get rid of using DSN for this database (or not), does the code go referenced in your article http://www.powerasp.com/content/hintstips/permissions.asp apply here or should it just work?

What else are we missing?

If a picture does not show after uploading it is one of the following things.

The upload method chosen is not supported on the server
or
The physical path specified to the pictures folder is not correct.
or
The URL to the Pictures folder is not correct.
or
Permissions to the pictures folder have not been set properly


Here is more information on how permissions are set.

http://support.cjwsoft.com/code/moreinfo136-1.htm
http://support.cjwsoft.com/code/moreinfo56-1.htm

Without more information and the settings you have entered and chosen that is all I can offer for now.