Testing for XML Parser Support

the microsoft xml parser is generally installed by default on all new server setups..

It allows ASP code to make calls to other pages anywhere on the new as well as a lot of other handy things..

download and run this ".asp" page to verfiy that it is installed and be sure it is available for you to use

2004-12-10_132620_test_xmlparser.zip

Make sure you run it from your web server through the web browser

Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page.   the url when the error appears is: .../users/add_new_account.asp

I think the error has to do with my email component setting - becuase it works fine otherwise.

I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com

Note: I receive the email notification and the user does get added.

Can you help please? Shirley

UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?

Hi,

The source code comes with it.
They are the.vb files.

I don't give out any project files for reasons stated in the article below.

Please read this in full if you want to edit the application in Visual Studio.NET

http://support.cjwsoft.com/code/moreinfo85-1.htm

The only other thing I can think of if you are not getting any errors.

Is that you may have the path to the server include file correct but ASP server side code is not executing in that part of your web site.

You can do a simple test to tell if it is...

Make a simple ".asp" page in the same folder.

Put only this code in it.

<% Response.Write ("ASP is executing") %>

then run the page via the web browser thru the server..

If the text prints out ASP is running... if you don't see anything it is not

Is there any way to make the ads in ASPClassifieds end on a day of the week. I would like all of my ads to end on Sunday night and was wondering if there was a way to automatically do that in the database??

Thanks

Dave

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

edited due to inappropriate content

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

works fine now

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

Hi

I've tried almost anything here... I'm using an online SQL SERVER database with ASPProtect 7, and I can't login after my initial creation of the admin account.

It works fine with Access... I believe I have checked all the fields created by the sql statement (which was run with no errors),

What could be the problem here? could it be a problem that I run my local IIS against the online sql server?

sincerely,

Morten

Hi,

I did some layout customizing on the register page on my site. ( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/reg ister.asp)

Now when I tried to register, it seems like it goes to the next page, but it is blank.
( http://www.lonestaricon.com/aspprotect/paypal_sub_signup/add _new_account.asp)

If I log in under administration, it shows that I have registered. I can't seem to figure out what part of the code is wrong, so that the new account page will not load.

I'd would greatly appreciate any help with this.

Thanks,

Allison

when I go to that url is seems fairly fast and somewhat normal.. even when I try to log in it pops right back up asking for login info again..

I would check to make sure you are not running anything that might be effecting your web browsing.. software firewalls.. ad blockers.. script blockers... norton internet security.. zone alarm... anything like that

they can all effect a lot of things regarding how web browsers act.

If you code support for it yes, the application comes with no paypal code or support built in.

If you think it will help you, you are welcome to a copy of the classic asp version which supports paypal subscriptions. Perhaps looking at the code would help you.

Sorry, not really.. not without a lot of changes to the code.
the recent activity info recycles.. it is not meant to be day by day

My suggestion there would be to look at both the log files and the user activty screens...

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

Can you incorporate a secure log in within the scripting.  I would like the account information to be secure without having to have the whole site using running through a secure (https://) path.  If this is possible, the scripting is perfect!

Larry,

I have a new computer up and running and am back on the Internet full time. I am here to help when you are ready to continue with this.

I went to your site to look around and "try it" like you mentioned but I can not really try anything as the admin username/password seems to be something other than the default

This is a great article for newbies..

Hints & Tips when working with ASP
http://www.powerasp.com/content/hintstips/common_sense.asp

Right,  I've done that.  My concern is that it will time out again while I'm trying to import the file.

The import/export manager does not show up under the users tab when I log in normally.  I have to pull up the page in frontpage and then preview it a browser to get it to show.

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

I have never heard of such a thing...
If the settings are enabled for the web it should work.
That is, as long as your include file syntax is valid.

I run my own windows 2003 server (you are on it now) so I should know

for troubleshooting

try a very very simple example... like a file in a folder.. with a server side include to a file under it

and see if that works

use real simple asp files with nothing crazy in them... and an include like this

<!--#include file = "../myfile.asp"-->

- I am using the original files that came with the software.
- The software ads items to the database flawlessly.
- ASPImage works great.

- When I try to remove an ad or an image it says it's been removed.
- The ad does not show up on the site anymore.
- BUT, when looking at the sql database the ad is still listed there.

Why is the software not deleting the columns from the database and the images from folder?

Note: My other tables for other projects, in the database, allow me to delete them.

I am trying to find out where I can enter the ttle for the application.

There is a variableor field called App_Name into which it would be good to insert a generic name. Can this be edited?

I have searched high and low but cannot find anything to do with it.

Sorry, you cannot, that is how it works and that is how it has to work for reasons I am not going to try to explain as it is pretty technical. (it works the same way even when not using paypal and using email authentication... nearly every registration system out there does it that way under an email authentication scenario or a PayPal IPN thing.)

Basically, if you are concerned about it you need to periodically manually check for accounts that were never activated and delete them. Maybe when I get some time some day I will make a little interface to help find those and clean them up at once.

Access to some sections of the forums must be requested.
Please Click on the following link and read all of it carefully.

http://support.cjwsoft.com/

ok,

when you say "we have set up to use the Subscription services exclusively for all new members "

I am sorry to have to ask this again but what does that mean exactly ?

how was that accomplished ?

The reason I say this is because when a subscription is created by a user through the normal channels.. meaning they went to the paypal subscription directory and either started a new account or found their old one to start a subscription with.. either way the PayPal Subscripber ID that paypal assigns is added to the database for that user and the expiration date is set to null.

Now, that being said the function that sends expiration emails to users will NEVER send an expiration to a user that has info in their PayPal Subscriber Field in the database. I just double checked that.

So that is where I am confused ? How did all these users get set up to use subscriptions and not have the PayPal Subscriber ID field popluated in the database ?

Seems to me the only way this could happen is if you set some stuff up manually and the PayPal Subscriber ID for each user never got put in the database. That and the expiration date didnt get set to null.

Again, I am sorry to keep asking this but it just seems to me that something else must be going on that I am not clear on regarding how you upgraded these people to use subscriptions.

In the end I think the answer may be to manually make sure each old user now using subscriptions has their PayPal Subscription ID set in the database as well as their expiration date from before set to null.

Hi,

I wanted to see if you had any suggestions for converting from Access to SQL sever database. I attempted this earlier today performing the following steps.

1) Create SQL Tables using Enterprise Manager / SQL Scripts
2) Use DTS to move all of the existing table data to the sql tables.
3) Update dataconn_inc.asp to use SQL and the required connection string.

When these steps were complete I was able to login to ASPProtect as an admin and search / find both groups and users. However, any attempt to edit or create users resulted in a "the page ... had a problem ... " type problem. It seems that I can read from the db fine but and getting errors writing to the tables. The user id that is being used to connect to the db is the [dbo].

Any additional hints for this procedure?

Thanks

Darrell

I guess i am not being clear as to what i am trying to do. As far as the event thing... lets hold off on that for now. It seems Chris has answered my question and i am on my own for that one...

As far as the log in goes: I went to that site you mentioned;www.CafePress.com to see if they had what i was talking about. and they do. Notice on the bottom of the page it says "sign in to your account"

I want that option on my home page where users can sign in to go to their account. It will either take them to a page where they can update their info, or it will take them to a protected page. Pretty much instead of posting a link on the site to say... click here to go to members.aspx and have it return an "access denied" the user can enter their info from the main page and be automatically re-directed to that members.aspx page.

I know how the viewstate works and i also know what that returnURL thing does..pretty self-explanitory.

Hopefully that makes things easier. I just want a user to log in from the homepage and be redirected to either a protected page or their account page...

(as does that cafepress website)