I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '¾_^Ö'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "¾_^Ö" is the exact string for the password.

Any Ideas

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

I am using cdont to send email. what do i have to do send email to other display my full name instead  of email address. In other word I want to see first name last name  in their email client instead of email address.

thanks for your help

Hello,

My guess your having trouble setting up a system dsn because the database has a password set on it. Your hosting company most likely sets up DSNs without using the advanced tab which is where the authentication information goes. Or they have some sort of web interface for the customers to use that doesn’t allow setting up that information.System DSN’s are actually difficult to set up correctly when the database has a password on it. There is of course a password on the database for security reasons so if someone ever downloads it somehow they will not get your information.

System DSN’s are not the way to go regardless as you will see mentioned at our support site.

http://support.cjwsoft.com/forum/forum_posts.asp?TID=9&P N=1

You really should try setting up a DSN-less connection. It is the best way to go. They are easier to set up, perform better, and are less load on the server. Any host that wants it customers to use system dsn’s is not on the ball as far as server performance and server resource conservation goes. They are really asking for trouble down the road.

All you need to do to make dsn-less connection is the following.

Get permissions set for the folder the database is in (by your host)… then figure out the physical path on the server to the database by using server.mappath or you simply ask your host for the info.

An article I wrote on using server.mappath

http://www.powerasp.com/content/hintstips/physical-path.asp

Then your connection string will look something like this.. (of course you edit the path to match what server.mappath tells you. And you make sure the database name is correct)

ListingsConnectionString = "DBQ=C:\Inetpub\wwwroot\asplistings\_database\asplistings_ac cess2000.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Another option would be to simply remove the password from the database using MSACCESS.. then try to connect to it using a System DSN without the password. If your host is storing the databases outside of your web in the root of the server then removing the password on the database is not that bad of a thing to do as there is no way anyone will be able to dload it from your site. Of course there is a still a performace loss when using a system dsn with an Access Database

works fine now

Hello,

You'll need to find a validation function to test for it.
Either server side or right in the form via client side javascript.

I dont have any experience with validating zip codes here much less UK.

Google it would be my best advice.. or maybe find some free app written in UK format and see how they did it.

Good Luck..

And if ya find anything post it here if ya like

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

humm, I dont know then..

If you want PM me your site info and I will go in and troubleshoot.

Frontpage or frontpage access, either way

and also the site URL

Hello..

I actually noticed something was up with your install earlier...
(I saw you in my log files when you clicked to cjwoft from the docs)

I need more info... like what uploading method your using.. what image resizing component, what widths yoru resizing things to... etc

have you tried it while telling it to delete the pics and also while not telling it not to delete them from the import folder

I might have to take a look tommoro as well to really figure it if that is ok

I have to go the bar to meet some friends so I wont be of much more help tonight :)

I been working steady all week and need a few.

CJW

Please be more specific. What hit count are we talking about ?

User Logging ? Albums ? Something else ?

Please descriube the situation in detail. There are really no settings for any sort of hit count.

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page.   the url when the error appears is: .../users/add_new_account.asp

I think the error has to do with my email component setting - becuase it works fine otherwise.

I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com

Note: I receive the email notification and the user does get added.

Can you help please? Shirley

UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?

Hey, I run a business and I will not have things like that mentioned in these forums.

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!

when you get back to work.. your   "redirect.asp" needs the password include file at the top of it.. or that wont work either..

and of course those pages you send people to all need to be repaired

Same here.  Thinking it might be server load or the bandwidth to the server.

Thanks for checking!
Lance

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

Is there a simple way to upgrade from 7.x Lite to 7.x Full?  I was testing out the software and I just purchased it.  I have made some look and feel changes to the lite version (ie: login page), but no look and feel changes to the admin section.  Is there certian files that I can add to have the full version without shorting myself features or functionalbity? 

Thanks

It almost seems like allow images is denied.  When I look at the ad it doesn't even show a place where the thumbnail or image would go:

Columns now are Ad Name/ Price / Expires / Hits

There used to be one before Ad Name.

Even unchecked (saved) and checked

Use_Picture_Upload

< = value=True name=Use_Picture_Upload> Check this if you will be using the picture uploading feature.

I pull that crap on myself once and a while... or my favorite is leaving a bootable CD in the drive and then wondering why the heck the OS doesn’t come back up. I pretty much promised myself back in 2002 that I would never mess with anything minor after 10PM. For whatever reason I always start messing around trying to "fix" something and end up sorry... Granted if it’s an emergency I am all for it, but I get dresses in advance anticipating the practically inevitable drive down to the datacenter.

Good luck with that, I am sure you will be much better off in the long run.

Just got back 10 minutes ago..
Missed plane yesterday because of traffic and the flight today was 3 hours plus 4 hours of driving

The fact that you are using Server 2003 is not relevant. I am very familiar with it and all my sites run on it.

The ASPNET account will be there by default once the .NET framework is installed. It won’t just show up in the list, you have to search for it like my article mentions.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

Need to clarify something..

Your talking about the page where a new user registers right ?
Your not talking about adding a new user from the admin area ?

Either way under no circumstances do I see anything like you are saying happening nor has any other ASPProtect user ever mentioned this probem.

I am going to need to see your site and see this happening. It just makes no sense the way you are describing it.

Also. did you edit the registration page code in any way. If so please revert back to an original copy to ensure this is not some sort of problem introduced by editing the code.

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

Is there any way to extend the limit multiple login feature to a certain number instead all or none?  In other words, i need to have a user be able to use the same login for x number of people.  My customers are institutions and want to be able to have a single login for however many users they purchase for.

It's MS Access, Version 7 (the Full one).

Anyway, I had inadvertently changed the user_id field type to "number".  When I changed it back to "autonumber", everything went back to normal.

Thanks you very much for your quick reply and sorry to have bothered you.

Hello,

I really need more infomation..

for starters

what is the server ? iis4,5, or 6 ?

what is the version of aspbanner.. aspbanner standard or aspbanner unlimited ?

what was the error message before you removed the "on error resume next"

was the sql database created using the sql creation scripts we provide as that is VERY important.

and lastly what are the the regional settings of the server ?
what is the date format ?