Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

The version of aspbanner you have should not matter.

What you are doing here is wrong.

<PARAM NAME=movie VALUE=" http://www.innovationtools.com/aspbanner/aspbanner/banner_re direct.asp?Banner_ID=25">

PARAM NAME=movie is supposed to link to your ".swf" file.
And thats why all you see is black.

I don't think you quite understood all of that information fully.

Your ".swf" files needs to be coded in FLASH to link to the aspbanner redirect url. You don't change that flash calling code like that.

The ".swf" file links to the aspbanner redirect url which tracks the click and then redirects the user to the Link URL

You basically need to code your ".swf" flash file to go to that aspbanner URL or code your flash file so it can take a parameter for the url it clicks to (like the macromedia article talks about. This has to be done when editing the flash file in the flash editor before the file is saved.

If you dont have access to the original ".swf" to edit it and re-save it.. your out of luck as far as tracking clicks goes

I did a sign up.. your verify URL is not saved/set in the application variables.

try saving the admin settings page again.. or reboot the server so the settings get reloaded

if you can make sure the web is it's own application in IIS

if it is your server do and "iisreset" from the command prompt

if all else fails you got iis application issues with the site... wait till tommoro to see if the setting gets loaded

The random password is generated during signup and the function that creates it is located on this page of code.

users/register.asp

it looks like this

Function RndStr(Length, UseChrs)
 If IsNull(UseChrs) OR (UseChrs = "") Then UseChrs = "0123456789abcdefghijklmnopqrstuvwxyz!@#$%^&*()_+=-"
 NewStr = ""
 Randomize(CByte(Left(Right(Time(),5),2)))
 For gpIndex = 1 To Length
  NewStr = NewStr & Mid(UseChrs, Int((Len(UseChrs)) * Rnd + 1), 1)
 Next
 RndStr = NewStr
End Function

For example go to this page and hit refresh and watch the password change.

http://www.aspprotect.com/demo2/users/register.asp

Yes, sometimes if you hit refresh quickly over and over you'll get the same password, but not generally. Also that is not something that would happen normally as a user isnt going to sit at that screen and hit refresh over and over.

Anyway... when signing up the new user of course has the option to change that password to something they would like better...

As far as... "selecting the same user name and password every time"

I need more information. That does not make sense for a lot of reasons.

Most importantly because usernames are not generated. The are inputed by the user during signup. They are then checked to ensure they do not already exist before the user is allowed to complete their signup.

So under normal circumstances there can never be duplicate usernames in the system or even users with duplicate emails as that is checked as well.

Now of course if you edited the code in any way it is possible all this is not working correctly ?

Hi Chris,

Our company has a big dilemma on how to manage the database for accounts that are expiring/expired.

We saw the function to email a batch of users who are expiring soon but this doesn't help us to complete the renewal process.

Once the email is sent, what happens afterwards? how can we setup the system so that we can renew their expiry dates or accounts without too much hassle?

The system currently doesn't have any renewal functions or to allow batch changes on multiple accounts at the same time so we have to manually edit one account at a time. This is extremely tedious if we have over 1000 accounts to manage (and we will).

If you have anything to suggest on all this I would appreciate it :)

Thanks alot
Sylvain

Your going to have a lot of problems and a lot of the code will have to be re-written.

There are a lot of things in the the code that the MYSQL database system does not support or has issues with . I know because I once made a version of ASPBanner work with MYSQL and it took weeks of work to get it stable.

Null field types can cause problems... but mostly ADO updates which I don't think MYSQL supports at all. All of the ADO stuff would have have to be rewritten.. etc etc

That's probably why you cant get much of the code to write to the database.


Here is a generic example.

An update to an existing record using ADO
http://www.powerasp.com/content/database/ado_update.asp

And update to an existing record using an update query.
http://www.powerasp.com/content/database/using_update.asp

All through the the code the ADO updates would have to converted to update queries which means a lot of work.

I used ADO a lot because I like it and it is little easier to validate data before it is written to the database.

It is also a little easier for customers to understand when they look at the code.

Anyway....

The app just was not designed to work with MYSQL.
It was specifically designed to work with MSSQL and MSACCESS only.

This holds true for all of our applications.

Your running off an IIS 5 Server so I would suggest just using MSACCESS as the database. The Photo Gallery app will run very well using MSACCESS. 

I do not have any programming knowledge and have what might be a simple question.

I am having a hard time getting my hosting company to modify the rights on the data folder. They state they support ASP and access databases however this is the response I got when I requested the modify permissions set for the internet guest account:

Were the rights changed on the data folder?  No, we do not manage rights to folders.

My question to you is: Doesn't supporting asp require those permissions be set on the database folder or can asp (not just aspprotect) work without those rights modified?

Thanks

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!

noted.

1.) this has been explored and because of the way groups works is not feasable. Because us this I wrote code to allow you to view and sort all users for any group on the actual groups page. You pick a groups and then click the "Show Users" button

2.) noted

Greetings:

I am doing the initial set-up and have run into a problem. Everything has gone smoothly up to and including pulling up the get_me_in.asp page. When I enter the "PasswordEncryptionKey", nothing happens. The page just sits there without doing anything and the browser says it's opening the page, but never does. I have tried entering the value with and without the double-quotes. The value is the correct one from the config_inc.asp file. I did a copy paste from the file twice to insure I transferred it correctly.

I am running Windows 2000 server.

What now?

Warren

its a text file   you just edit it with notepad..  if ya mess it up ya put an original copy back in

no biggie either way

jump in there..

I just showed ya exactly what to change.. its a no brainer man
This is simple source code. It's meant to be edited and hacked.

The only reason I warn you is so you can't blame me later on if it effects something

I am just trying to help

If ya dont like that solution why not just use periods for the first name field.. or a dash or something... then nobody will really see it

or maybe store the company name in the first_name field

seems like clever things to try without changing the code..

good luck...

Need to know more about ASP ?
Check out these links.

	PowerASP This site was started on October 8th, 1998 and is a great resource.
	ASP101 This site has been around a long time.
	ASPSchools Intro to ASP Good intro to asp

15 Seconds Free resource for developers working with Microsoft Internet Solutions. 15 Seconds is the biggest IIS and ASP development resource in the world.

ASP FAQ Have a question about ASP? Check the ASP FAQ site. They've probably got the answer.

ASP Free Your 1st source for free ASP and ASP.NET live demos, downloads and more!!!

ASP Connections ASP Connections Conference for the ASP Developer features sessions on ASP Performance, IIS 5.0, ASP 3.0, XML, ADO, E-Commerce, VID, COM, COM+, MTS, DHTML, load balancing, and more. Speakers include Mike Amundsen, Wayne Berry, Charles Carroll, Michael Corning, Jeff Niblack, & Ken Spencer.

4GuysFromRolla 4GuysFromRolla: Web Technology, Programming, Humor... All this and it counts as work!

CoverYourASP.com A great new site. It's got some great stuff and is using JScript! A must see!

askASP Promising new site! Check out the question archives!

CodeHound CodeHound ASP - The ASP Developer's Search Engine!

CodeAve.com A neat ASP reference with some interesting features. Check out their "Script Writers"

ASPZone The website for advanced ASP developers.

Programmer's Resource This site is geared towards Activer Server Pages and Access developers.

Planet Source Code Search over half a million lines of free code!

DevASP A relatively new ASP site. Straight forward and informative.

www.LearnASP.com This in another site maintained by Charles Carroll, and it specializes in Active Server Pages programming issues. Contains links to a wide range of resources and articles.

ASPin.com The ASP Resource Index. Here you will find the stuff you need to take advantage of ASP and make your website an interactive mecca.

411ASP.NET The ASP.NET Resource Directory

ASP Sites A great place to go to find ASP resources fast!

Haneng.com A different ASP site.

Macromedia - DevNet While much of the content is Dreamweaver MX-centric, they also have a fair amount of plain vanilla ASP.NET content as well.

The Web Developer's Virtual Library The WDVL is part encyclopedia and part e-zine dedicated to covering all sorts of information about developing web sites... including ASP.

 

Ok, so I checked to see if ASP is running on the server and it is.  then I added code to the top of a page and this is what i can see when 'view Source' on the web browser:

<%@ LANGUAGE="VBSCRIPT" %>

<!-- Begin ASPProtect Code -->
<!-- Groups with access to this page. ( * Admins * ) -->
<% GROUPACCESS = "4" %>
<! #INCLUDE FILE="check_user_inc.asp">
<!-- End ASPProtect Code -->

<html>
<head>
<title>TeamManagers</title>

Yet I get no challenage for a password and no error message!

Actually, your whole site is like that.

http://www.bones.myftpsite.net/rfamilystuff/

You should definetly fix that..
I can't help ya with it though. You'll have to figure it out.

I know ya can do it...

later

hi,

no.., not unless you come up with some clever way to handle it on your own
http://support.cjwsoft.com/code/code_info.asp?TID=369&KW =https
read 2nd to last post

The way ASPProtect ships it is designed to either be in http:// the whole time or https:// the whole time.... (there curently is no solution from me allowing going from one to the other)

sorry

I have just purchased ASP v7 and loaded.  Followed instructions.  Obtained codes not prob.  Get to single field login screen, enter password and following page appears:

Method Not Allowed

The requested method POST is not allowed for the URL /temp/aspprotect/password_admin/get_me_in.asp.

Added folder aspprotect under (temp web) folder - temp, but also tried under root folder of web site.

Still no luck.

Hi Chris,

Thanks for the answer. No, I am not using Paypal since these are employees and sales reps. I guess i'm on my own on this one. :)

Thanks
Sylvain

The way the application ships there are no password confirmation areas anywhere ? Please be more specific as to what you have done and if any mods are involved ?

If you are talking about one of the MODS please realize they are not supported. http://support.cjwsoft.com/code/moreinfo459-1.htm

Even though they are not supported I look them over pretty closely and I know of no issue like you mentioned so I would suggest re-downloading the MOD. Perhaps you got a corrupt download or file.

Hi,

I am investigating the possibility of purchasing above script having spent some hours trying to integrate various free banner rotators into my Invision portal.

What attracts me to your script is that it has 6 ways to call banners. I am an inexperienced webmaster with only a smatterring of knowledge about ASP. Will ASP Banner be able to integrate with my portal?

Many thanks

David van der Want

A very common and extremely bothersome error encountered when running ASP apps that connect to a database is the "80004005" error. It comes in many varieties.

These articles cover it.


(an article I wrote)
http://www.powerasp.com/content/hintstips/permissions.asp

(more articles)
http://www.aspfaq.com/show.asp?id=2009

http://support.microsoft.com/default.aspx?scid=kb;en-us;3065 18

http://www.aspfaqs.com/aspfaqs/ShowFAQ.asp?FAQID=115

http://www.macromedia.com/support/ultradev/ts/documents/8004 005_cannot_open_unknown.htm

hello,

There is no built in option. You would have to add code to do that.
Its not difficult but custimization like that is not something I support.

enjoy the bar.. drink one for me.. cause that was the problem..

After turning off the friendly errors, here is the detail.

Active Server Pages error 'ASP 0131'
Disallowed Parent Path

/users/register.asp, line 16
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

ANSWER:
http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&K W=Disallowed+Parent+Path+

LOL

OK, thanks.

Nick