When I enter www.vickerylightning.com/aspgallery/dataconn_inc.asp on the screen it says "Not a valid bookmark"

as far as that goes I have no idea.. I have never seen that message before but you are not suppose to run that page by itself regardless.. it is an include file not meant to run on its own

I dont understand why I would get an error? -- I'm not sending the email from internal - so why would it try to validate?

I'm trying to send an email to an independent place - just like I would send an email to you

Am I using the wrong email setting - should I be doing something other than using "remote server"

Yup, it probably means the virtual directory is not configured as an Application in IIS.

You did put this in a plain folder in your web, correcct ?
Not a subweb

Regarding the application settings for the virtual directory.. if it is your server you set that stuff up in the IIS console.

If hosted somewhere it is there responsibility to have that set up correctly for you and you need to contact them and ask them what the deal is.

Christopher,

Thank you again Sir. Your quick responses and helpful demeanor add greatly to the value of your software.

Just to let you know that i figured out my problem. I had to modify the connection in the email code and get the correct path from my provider.

I hope you enjoyed your vacation.

Thank you
Adam

I have written asp.net application pages- obviously i knew what viewstate was, or else when they made a mistake on that page it would not have saved their filled in info. Same thing for after they submitted, when they hit the back button their info would be gone.

For someone who wrote this software it seems you are not able to do simple things. Im begining to think you didn't write it. The only reason no one else asked this many questions is possibly because they didnt NEED the functions i am TRYING to do.

I know how the log boxes work. Esp. reg ASP... they all allow you to enter your username and password and then when you hit submit it gets verified and transfers you to your destination. ASP.NET has that capability also.. i didn't purchase a program to go and have to re-write it in visual studio. It would take me longer to re-write YOUR code than it would to have LEARNED ASP.NET and made MY OWN.

The program seems to have some great complex features, however, your not able to incorporate this easy login from a diff. page function... fishy

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

I want to try this on the machine im using now; which is windows XP.

Is this possible? I don't think i can set folder permissions on XP... there is no option to do so...

Is there a way to do it?

ASPProtect v7.x has a new feature called groups.

Groups are meant as a replacement for using the access levels as they are much more powerful. Support for pages protected using access levels is left in tact for backward compatiability for a customer that was using them.

A customer recently told me groups could not be used like access levels and that 8 access levels was not enough. This is how I explained that groups can do everything access levels can do.



Groups can honestly do everything access levels can do if you really think about it.
Using groups and protecting pages accordingly you could actually create a system that basically worked identically to the way the access levels works.

For example..

You make 8 groups and assign users to them accordingly

Protection code on page allows access to groups 1-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "1,2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any one of those groups would have access..

Protection code on page allows access to groups 2-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "2,3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  2-8 would have access..

Protection code on page allows access to groups 3-8
The aspprotect system generates this code for you…

<% GROUPACCESS = "3,4,5,6,7,8" %>
<!--#INCLUDE FILE="check_user_inc.asp"-->

In this case a user assigned to any group between  3-8 would have access..

and so on... I think you should get the picture by now

actually  I just went to it again and it was somewhat slow coming up this time..

perhaps you have some issues with the sql database.

it should be instant.. like this one I run on my server
http://banserver.powerasp.com/aspbanner/

I suppose it could also have something to do with sql server resources but its hard to say..

Hi - When I try the mass email feature, I get an error that says:

ODBC Microsoft access driver) too few parameters expected 1

/aspprotect/password/admin/send_mass_email.asp line 280

Oddly...this feature works fine when I use the original admin user that you setup. 

But I setup another one with my username and password (not test) - because I was afraid anything with "test" could get deleted. 

Any ideas on why the new admin userid would not work?  Note: I have not change any code from the original installation.

CJWSoft offers a mutually beneficial partnership program for resellers of our Active Server Pages Based Web applications.

The program is very simple.

• You offer our products to your customer's as Ready-to-Run Web Site Applications.
• We sell your company our software at a 50% discount allowing you to re-sell if for the same price we sell it for or slightly higher.
• Your company installs the application in the customer's web site and configures it for the customer.
• Your company is in charge of installation support and general usage issues. We handle other more complex issues as usual.

Each time a customer purchases an application from you, you are required to purchase a license from us.
These must be purchased online via PayPal. You will be give a special password protected URL where these purchases can be made. You are in charge of setting up a system for your customers to purchase the software from you. You are also responsible for purchasing a license from us within 7 days of a license being purchased from you.

Below are the applications currently eligible for the program.
They have been chosen because of their popularity and reliability.
You must resell all three applications below.
The details and pricing of this program may change at any time.

	ASPBanner Standard sells for 99.95 (You pay 49.95) ASPBanner Standard is a high end Banner Rotation system. Web Based Administration for managing the users and banners in the database. Advertisers can monitor online statistical reports via their web browsers.
	ASPProtect Version 6 with Option Pack sells for 99.95 (You pay 49.95) Easily Password Protect any ".asp" page within your web site.  Easily integrates with your current website or project design. Web Based Administration for managing the users in the database.
	ASP Photo Gallery Pro sells for 49.95 (You pay 24.95) ASP Photo Gallery allows anyone to have their very own online photo album. Upload an unlimited amount of albums. Set up categories however you like. Allow others to upload photos. Optional image resizing and thumbnail creation.

We are looking for Web Hosting Companies and ISP's who can sell an average of 2 applications per month.
If you are not a serious company with a professionally done website you need not apply.
We are not looking for mom & pop operations.

To be very clear:
We are looking for experienced ASP Development/Hosting Companies that are serious about being a reseller and ready to go.
We need knowledgeable resellers that are experienced with ASP and will be able to install the application for the customers and handle some of the general installation issues that may come up.

To qualify for the program:

Please send us a brief overview of your company, Website URL, and your expectations for the program. After looking over your information we will get back to you with a response.

Contact us

Additional Info:

Our applications run on NT based servers only with true Microsoft ASP support. They do not run under Chilisoft. Our applications are licensed per website. That means one running installation of the database and scripts. Qualified resellers will be reviewed every quarter to see if they are meeting the 2 application per month quota.

thx for posting this..


Just a few notes... more than 100 pictures specified in the config file is not supported. You are of course on your own if you specify more than 100

Also, technically the post above should say more than 102 pictures... "I think" as you wont need more html cell code until then..

The loop in the code is probably how I should have done it in the 1st place but I was in a hurry to get this finished and I also never expected/wanted anyone to specify more than 100 pics per album.

Lastly.. depending on what style you are using in the config file the code above may not work as some of the styles do not use cells but line breaks instead..   At least from what I remember.

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

Hi,

You see, an include file is no different then a link to an image or graphic. The path to the include file must of course be valid. That file isn't in the same directory as that page so you get an error.

You simply need to make the call to the include file valid.

See my article on server side includes.
http://www.powerasp.com/content/code-snippets/includes.asp

You should also look at some of the provided example pages and see how the paths to the include files are done.

You can also use a virtual include if you figure out the page for that. See my article for the difference between a file include and a virtual include.

The code generator in the admin area shows examples of both but depending on your site structure the paths may need to be slightly edited.

Server Side Includes are a fundamental part of using ASP and they are used a lot. Once you understand how include files are used you will think it is the simplest thing.


More articles on server side includes

http://www.w3schools.com/asp/asp_incfiles.asp

http://www.4guysfromrolla.com/webtech/faq/Beginner/faq6.shtm l

http://www.minwar.com/24

Hi

I would like to ensure the the user uses a UK style postcode not a clue how to ensure this as I am new to asp. Any ideas?

regards

John

Not really sure how to do this.... i think you know what i am looking to do.. is there anyway you can show me or create that solution for me? It would prob. take you minutes as its been taking me hours

I'll try to help when I get back tues night,, see the contact page for info on where I am .
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1

The IPN Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal web accept order is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

This Support Pack basically gives you an additional signup and registration directory "paypal_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

No rush, I have it out on the internet, but have not gone live with the site yet.

Thanks for responding,

Enjoy your well deserved break

you not seeing the real error

http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

After turning off the friendly errors, here is the detail.

Active Server Pages error 'ASP 0131'
Disallowed Parent Path

/users/register.asp, line 16
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

ANSWER:
http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&K W=Disallowed+Parent+Path+

I am having an issue with the Thumbnailing process. My host does not support ASPImage so I have to use something called asp thumbnailer which is similar to ASPImage. I am trying to modify the Dundas upload to automatically reduce the images to create thumbnails. I ripped out the asp image code and replaced with the bottom. The main issue I believe is grabbing the image files. I am not sure how to name the actual image file that is already uploaded by the dundas upload. the code is below:

The peices in red are where the issue is I believe. What you see below is my attempt to identify the exact image and then rename it tthumbnail. My optimal solution would be to take the picture, resize it and rename it exactly what it was named before.

Any ideas

Thanks

<% Else %>

<%
 Dim thumbObj
  
 Set thumbObj = Server.CreateObject("ASPThumbnailer2.Thumbnail")
  
 If thumbObj.LoadFromWeb("../pictures/" & Filename) Then
     thumbObj.ThumbMaxDimension = 140
     If thumbObj.CreateThumbnailToWeb("../pictures/Thumbnail.jpg") Then
         Response.Write("Thumbnail successfully created.") 
     Else
         Response.Write("There was an error creating the thumbnail.")
     End If
 Else
     Response.Write("<p><hr><b>Unable to load the original image.</b><hr>")
 End If

 
Set ConnClassified = Server.CreateObject("ADODB.Connection")
ConnClassified.Open ConnectionString
Set cmdTemp = Server.CreateObject("ADODB.Command")
Set CmdSetImageInfo = Server.CreateObject("ADODB.Recordset")
cmdTemp.CommandText = "UPDATE Ads SET Image" & PicNumber & "_Uploaded = 1, Image" & PicNumber & "_FileExtension = '" & FileExtension & "' WHERE (Ad_ID = " & Ad_ID & ")"
cmdTemp.CommandType = 1
Set cmdTemp.ActiveConnection = ConnClassified
CmdSetImageInfo.Open cmdTemp, , 1, 3
%>

Ok i was wanting to know what the "if then" statement would be if i wanted to show xxx if your group is xxx.

I tried

    <% If Session("Groups") = "1" then%>
    <font size="2">TEXT HERE</font>
    <%end if%>

But that did not seem to work.

I uploaded the files designed for an aspprotect folder at the root of my site (mysite.com/aspprotect) and went to mysite.com/password_admin/get_me_in.asp and receive this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xf54 Thread 0x908 DBC 0x90c41dc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I am assuming my host has still not set rights properly and that is why I receive this error. Am I correct?

 I will definitely recommend hosting company you suggested for our businees site.

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

I would say that it isn't all that difficult using mySQL for the backend....the main thing is to make sure you set the primary keys for auto-incrementing in your database.  Alos need to make sure that any DELETE SQL statements are formatted like this

DELETE FROM tblName WHERE tblField=SomeValue

and not

DELETE * FROM tblName WHERE tblField=SomeValue

The same holds true for using MSSQL