Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

  Much thanks, the duplicate incl's I spaced on and should have caught.  The hidden form variable was a key issue.  Thanks for the syntax and the help.  Now I get this page together. j  As a note - I got faster results by dropping my timeout to 3 minutes temporarily while progging and cleared browser cache between tests.  Thanks again.

all I can say is try other things...  like

mail.yoursite.com

or

smtp.yoursite.com

etc etc etc

replacing yoursite with the name of your domain of course


the settings for sending email via ASP are no different then the settings you would use in outlook or something... except sometimes on the server level localhost works as the email server because they set it up to allow that

and of course those 3rd party emailing components need to actually be installed on the server

Hello,

You'll need to find a validation function to test for it.
Either server side or right in the form via client side javascript.

I dont have any experience with validating zip codes here much less UK.

Google it would be my best advice.. or maybe find some free app written in UK format and see how they did it.

Good Luck..

And if ya find anything post it here if ya like

All can say right now is take a break and get away from it for a bit. All your going to do is stress yourself out more if you keep working on it.

There is probably a way to make it work but it may require days of fiddling around and reading articles and trying things and even then you may not get it working AND THEN ITS JUST A BAD IDEA ANYWAY. Like John says you are better off running it on a server that is not a domain controller.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1


The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.

This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

Changing Payment Options

In the "paypal1.asp" file there are some sample payment options set up.

They look like this and you can have as many as you like.

<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">

<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->

<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">

</form>
<hr>
<!-- End Payment Option Code -->
 

To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.

This link was valid the last I checked...
Subscriptions and Recurring Payments Manual

It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.

Bascially these are the important ones..

a3 - amount to billed each recurrence t3 - time period (D=days, W=weeks, M=months, Y=years) p3 - number of time periods between each recurrence

The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)

<input type="hidden" name="custom" value=",,<% =User_ID %>">

or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)

<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">

Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's

access_level,groups,User_ID

If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.

Values must be separated by a comma even if there is no value and there can be no spaces.  If you didn't want to set an access level or groups there would still be 2 commas at the beginning.  etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.

The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
 

Hello Chris:

Yes I'm using the Option Pack.

-Ricardo

no, you cannot unless you plan to write a lot of custom code.

That is why the option pack has groups which eliminate the need to use access levels because groups can do everything access levels can and more.

There is an article here regarding that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=32& PN=1

Excellent

Hi,

You see, an include file is no different then a link to an image or graphic. The path to the include file must of course be valid. That file isn't in the same directory as that page so you get an error.

You simply need to make the call to the include file valid.

See my article on server side includes.
http://www.powerasp.com/content/code-snippets/includes.asp

You should also look at some of the provided example pages and see how the paths to the include files are done.

You can also use a virtual include if you figure out the page for that. See my article for the difference between a file include and a virtual include.

The code generator in the admin area shows examples of both but depending on your site structure the paths may need to be slightly edited.

Server Side Includes are a fundamental part of using ASP and they are used a lot. Once you understand how include files are used you will think it is the simplest thing.


More articles on server side includes

http://www.w3schools.com/asp/asp_incfiles.asp

http://www.4guysfromrolla.com/webtech/faq/Beginner/faq6.shtm l

http://www.minwar.com/24

Is there any way to make the ads in ASPClassifieds end on a day of the week. I would like all of my ads to end on Sunday night and was wondering if there was a way to automatically do that in the database??

Thanks

Dave

Yup everything looks ok - but why no error?

This just gets better - now the email a friend link says sent successfully and doesn't send out - what the heck...

What would cause it to 'think' it is doing the task yet still fail?

Hi,

I am investigating the possibility of purchasing above script having spent some hours trying to integrate various free banner rotators into my Invision portal.

What attracts me to your script is that it has 6 ways to call banners. I am an inexperienced webmaster with only a smatterring of knowledge about ASP. Will ASP Banner be able to integrate with my portal?

Many thanks

David van der Want

I purchased and installed the full version ASPProtect 6.0 in Feb 05 (must have been just before 7.0 came out) and have been using CDONTS for email authorization during the registration process.

It was working fine for about three months. Now, after registering, the  email  authorization is NOT delivered to the new registrant. There are no error messages.It just doesn't arrive.

Any thoughts on the subject would be appreciated.

Hi Chris,

We installed our key onto the live server.

However, since our temp key has expired, we can't access our application on our development machine because the login won't work anywhere except on the live server.

Of course we can access the application on dev, if we remove the aspprotect tags, but if we need to log in to do something unique to the user, then we have a problem.

Can we get another temp key from you? And would there be a better long term solution to this debug/maintanence issue?

--JP

I'm using the groups protect feature on my pages. None of them seem to close the session after clicking 'logoff'. I can tell because if I hit the back button and return to the group-protected page, hit 'refresh', the page refreshes, I'm not asked to log in again.

On the other hand, when I open a page that's protected by an access level and click 'logoff' (uses same logoff asp file to logoff), it seems to work fine - if I go back a page and refresh, it asks me to log in.

Just wondering - is anybody else having problems like this? Maybe I screwed something up in the few adjustments I made a while back. Any idea what it might be?

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

All this being said installing the desktop version of SQL may be a little tricky as it may complain that your SA account needs a strict password.

The solution is to run the SQL Desktop setup.exe with some parameters specifying a password for the SA account.

So you go to the command prompt or make a shortcut to the setup file and run something like this

setup.exe SAPWD="YourPassword"

minus the quotes...

I got that info from this article and it worked fine
http://www.experts-exchange.com/Databases/Q_21036508.html

The other thing to remember is it might take a reboot to actually see the SQL server icon running in the taskbar. You may also need to go into the administrative services and enable the "SQLSERVERAGENT" as well as set its startup type to "automatic"

And a reboot here and there..

Whammo... your in business...

Ok, if the link to the import/export screen does not show up its probably because you never put the import/export path in the admin settings?

go check that for me.

cause running that page without a path for the files could cause a timeout.. thats why the link doesn't show if the path is not entered (so people won't run it)

it looks sorta like this (there will be a field to fill in which wont show here)

Settings below specify the physical directory path of the export directory. This is used by the system when using the import/export feature. The export directory needs modify permissions for the anonymous webserver account.
ExportDirectory

here ya go

http://support.cjwsoft.com/code/moreinfo169-1.htm

humm

expiration dates in the aspprotect system are not used at all when using paypal subscriptions.. all date handling is done on their end actually

and they of course send notices from their system to the user regarding their subscription and when it renews,cancels, etc etc

so I am pretty sure any errors with that would have more to do with the info you used for the subscription setup and possibly any paypal settings associated with it

its hard to say at this point

The smart thing to do I think.. would be to sign up someone using another PayPal account (your allowed 2)... and while doing it be very careful about the subscription setup data.. and then as soon as the subscription is created review all the info in the paypal system and see if the length of the subscription / expiration.. etc etc in the paypal system info looks right..

at least then you can begin to troubleshoot what is going on...

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

Just having the database with members does not protect the page.  You need to add the appropriate code to every page you want to restrict access to.

You need to click on the Groups tab in Admin. 
Click on Generate PW protection code. 
Click on the basic button if you don't want to include levels or groups or choose a level or group(s) and click the appropriate button. 
Paste the code that's generated  into the top of an ASP page in code view.

Is that what you're looking for? 

Michelle

Can I have the logon be in a top frame while having the protected pages displayed in a main frame?

Using frames with forms based authentication is not the best thing to be doing. Your much better off not using frames and using includes files to do a virtual frames sort of thing (search google) but if you are going to use frames I would suggest password protecting the frameset page as well as any pages it contains.

If you want to have a login form in a non protected top frame all the time.. that posts to a lower frame that is password protected.. you would do this
http://support.cjwsoft.com/code/moreinfo169-1.htm
but change the target of the form to one of your frames

personally though I think that would be a somewhat goofy setup to have going on


Also, how will it behave if a user moves in between a protected page to a public page and back to the protected page again?

As long as they have cookies enabled which is required for session variables to work... then you will have no issues because once they come back to a page they have permission to they will just be allowed in without login.. at least while that session is still active.. or for a longer time if they choose the remeber me option which keeps track of them with a cookie .

Really, the best thing to do is expirment and see how things behave.

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

That did the trick. Once again a quick very helpfull reply.

Thanks.

The album ID thing is completely normal and by design. Once an ID in the database is used it can not be used again. That is how autonumber fields in a database work.

As far as not being able to delete images... Are you by chance using ASP.NET to show dynamic thumbnails... Because if you are you must turn that feature off and wait 20 minutes or so (maybe more) before you will be able to delete any of the images. It is because the current version of the ASP.NET script used to make the thumbnails locks the images on the server temporarily anytime it creates a thumbnail.

It is a known issue... and there is no fix at the moment other than what I told you above.

Hi,

Its just not enough information to go on. I need more details on what is going on. There are a lot of configuration settings in these applications. I really do not know what to make of that screen shot.

My 1st guess is that if you cannot delete a picture that the picture folder does not have delete permissions ??

I also need to mention that I am not sure what this has to do with ASPImage ?

Thanks!  Will try both.

Appreciate the support.

ALL FIXED.. tested with real paypal accounts and a live system
works perfectly

THIS FIX IS ONLY FOR PAYPAL SUBSCRIPTIONS

Download this file "ipn.asp" and put it in the "paypal_sub_signup" folder
2005-03-10_164645_aspprotect_subscription_fix.zip

Basically somehow an older version of the this file was in the original download archive.

I am VERY SORRY

Anyone who purchased ASPProtect 7 before March 11, 2005 should download this fix.

Cool.

Well I'm in the middle of uploading the txt file and it's about half way done and sitting there...so I'm keeping my fingers crossed.

ASPProtect v7 comes with working example code of protecting a file download.

This comes with the system as an example folder with some files in it.

(some of the initial purchaser's of the system might not have that directory.. if that is the case please ask)

Here is how it works...

Basically we protect the file download by only allowing a logged in user to download it. The special ".asp" page we use the stream the file is password protected. It also hides the true location of the file so you can keep your files out of your web or keep them in a folder in your web that does not allow file browsing. Under this scenario even if someone looks at the html source they can not tell where the file really came from and they can only download if they are logged in and you offered them the link to the file.

For the file download protection examples to work you may need to edit some values
in the stream_download.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "download file name" from the download_link.asp file which is an example of how make a download link to the streamed download.

yes, admins have access to absolutely anything...

as for the other question what you should do is only show links to people logged in that they have access to.. then they wont get logged out when they go to a page they do not have access to

for example if someone doesn't have access to a level 4 page dont give them a link to go there... you can do that by checking the session variables and creating your hyperlink html code accordingly .. using simple if-else logic... you could even make a hyperlink non-clickable and add some text to it like (no access)

it's all about taking the time to intelligently designing the different areas of your web site. It takes a bit of time and work to really make a system flow the way you want it to.

other than that it becomes extremely complicated to not grant them access when they go to a page they dont have access to but also keep them logged in. It is just not designed to flow that way. If someone goes to a page they do have access to they get logged out. It sort of has to be that way because of the ways things flow.

more info on accessing user info after login so you can do that
http://support.cjwsoft.com/code/moreinfo198-1.htm

another good thing to check out is the provided examples for mutliple access levels. You can see that if you log into the default page for that that it only shows you links to pages you have access to. Done with simple if-else logic around the html links. It is using groups but you can do the same sort of concept using groups.