sorry,

there is not.. it gets really complicated
its practically a miracle it does what it does due to the nature of the web

perhaps with some modications it could do mroe but the current version pretty much does what it does

I have seen that happen before though it usually just happens once and then after that it doesn;t show up. It's the asphttp component doing it. The ASPBanner system is not doing it. I would try using banner calling method such as the xml parser method. It's usually installed by default on 200 and 2003 servers.

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

After taking another look at this and trying your suggestions without success, it appears that in Windows 2003 server it is nearly impossible to remove the READ ONLY attribute from the _database folder.  I'm wonder if this could the cause?

Thanks 

ALL FIXED.. tested with real paypal accounts and a live system
works perfectly

THIS FIX IS ONLY FOR PAYPAL SUBSCRIPTIONS

Download this file "ipn.asp" and put it in the "paypal_sub_signup" folder
2005-03-10_164645_aspprotect_subscription_fix.zip

Basically somehow an older version of the this file was in the original download archive.

I am VERY SORRY

Anyone who purchased ASPProtect 7 before March 11, 2005 should download this fix.

Chris,

I've given the IUSR account modify access for the aspprotect folder.

In the ODBC manager module on the webserver I've taken out the aspprotect access driver option.

The dataconn_inc.asp line reads as

ConnectionString = "DBQ=D:\missourirealtor.org\members\aspprotect\data\database \ASPProtect_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

Now this should make it DNS-less correct? with the permissions set properly?

I've also taken out the password on the access database.

The original database of users I had was an access database from a different program called spooky login.  I exported them into a tab delimited file and changed the column headings to match those in aspprotect exactly.  Actually access would not let me import them in the databases without them being exact.

I imported that information directly using access's import options.  I tried the import/export manager in aspprotect but kept timing out as well.

Chris:

I just got done trying it myself and it worked great for me too. I was aware of the security issue, but I'd already planned on using SSL for this particular call, as well as for the secured pages accessed through the normal process, so the bad guys will be kept at bay.

Thanks for the help.

I encountered a problem that I haven't been able to solve. I'm trying to get .pdf files to byte serve (page-by-page load in the browser) but unable to do so. I've narrowed it down to stream download file where it creates the header object. I haven't made any success with the changes I've tried. Any help would be very nice.

This maybe useful:
http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/act/htm/actml_ref_href.asp

OK, I updated the server with the SP 8 Jet updates and this had no effect.

Then I loaded the asptest file and put in the correct path. The results were:

Failed: Database could not be connected to....

Error reported from server:
Error source: Microsoft OLE DB Provider for ODBC Drivers
Error number: -2147467259
Error description: [Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x784 Thread 0x854 DBC 0x2101014 Jet'.

Thanks for that.

I have tried InStr("*2*",>"0") in the query design window but it does not return any members.  

I have orded a Access Bible to help me in furture

More Info in Case Anyone is Interested:

This bug was mentioned by a couple people. The cause of it was never really understood until I recently re-wrote some of the banner code for an upcoming version.

The fix for this bug was very simple. It was just one of those weird situations where code should have worked but did not. I added some code to do it a bit differently and it worked as it should have..

It really still makes no sense to me why it didnt work the way it was, but at least there is a fix.

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1


The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.

This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

Changing Payment Options

In the "paypal1.asp" file there are some sample payment options set up.

They look like this and you can have as many as you like.

<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">

<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->

<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">

</form>
<hr>
<!-- End Payment Option Code -->
 

To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.

This link was valid the last I checked...
Subscriptions and Recurring Payments Manual

It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.

Bascially these are the important ones..

a3 - amount to billed each recurrence t3 - time period (D=days, W=weeks, M=months, Y=years) p3 - number of time periods between each recurrence

The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)

<input type="hidden" name="custom" value=",,<% =User_ID %>">

or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)

<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">

Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's

access_level,groups,User_ID

If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.

Values must be separated by a comma even if there is no value and there can be no spaces.  If you didn't want to set an access level or groups there would still be 2 commas at the beginning.  etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.

The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
 

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

Turn off "Show Friendly HTTP error messages"
If you are getting errors with your ASP application go to Internet Explorer and make sure this setting is unchecked. Having this checked can cause a generic error to be displayed in you web browser when ASP code encounters an error. This generic error message doesn't really help you fix the problem. Having this setting unchecked will usually result in a more detailed error message and the line number the error is occurring at, thus giving you a good clue as to where the problem is within the ASP code. If detailed ASP error messages have been disabled at the server level this setting will make no difference.

I really do not know for sure, but I imagine there are customers using their windows hosting. Usually I do not know what hosting company a customer uses and I am usualy the only one that responds to forum questions.

Why not download the current Free lite version and try it out ?

CJW

Ok, I was not aware of this domain controller issue as I have never had a customer have their web server set up that way. It is not a common situation under commercial hosting, thats for sure.

http://support.microsoft.com/default.aspx?scid=kb;en-us;3151 58

seems it was some sort of bug that was corrected in the the 1.1 .NET framework involving no ASPNET account being created. seems there are lots of work arounds involving making new accounts and editing machine config files. I found quite a few google articles as well.

http://www.kbalertz.com/kb_315158.aspx

http://www.15seconds.com/issue/030115.htm

I actually should have said "the framework installed" not "asp.net"

So, in the meantime I am asking John Evans what he thinks about this and I am going to ask you what version of the framework you have installed ? ASP.NET Framework 2.0 is the newest and you definetely should be running at least version 1.1 and probably should upgrade to 2.0.

I do not know why other ASP.NET code you have works ok. Your other code may not be using the odbc driver dll the same way ASPProtect.NET does. There are lots of possible reasons. At the end of the day I think the basic issue here is still a low level configuration/permissions issue and it can be corrected from what I am reading. It just may require a bit of trial and error regarding local and domain accounts and editing the machine config files... etc etc

OK, I figured out the problem.  Not running ASP becasue the pages are not saved as ASP but rather HTM... OK so I am smart like a tractor but strong like an ox.

You need to make sure you created the SQL database using the SQL scripts we provide and that no errors occur whatsoever. That is extremely important. You must use our SQL creation scripts.

Then, when you create the user you need to go back to that user and make sure you check the admin account and save that user again. (many times when setting up a system for someone I find myself forgetting that step and then I have to go back in and check the admin box for the user I created.)

And of course create the user from the ASPProtect admin area web interface. Do not add the user to the database manually because you will have no way to enter the password correct as it is encrypted. And do not change the encryption key after making the user/.

It would also be wise to check the SQL server database at every step to make sure the user info gets created and that all the field info looks correct for the most part.

You also want to be sure to specify SQL as the database type side the connection string info as the SQL directions go over

a remote sql server should not an issue.

thats really all I can think of right now

Hi Chris,

I tried changing using Notepad in the config_inc.asp

from:

If  Application("SERVER_SOFTWARE") = "" Then
 Application("SERVER_SOFTWARE") = Request.ServerVariables("SERVER_SOFTWARE")
End If

To

Application("SERVER_SOFTWARE") = "iis/6"

and the albums still do not show up under the categories

Rhona (rookie)

you actually dont touch any of those
UploadDirectory = CmdGetConfiguration("UploadDirectory")
They get set from the config table in the database which gets edited in the admin area.

so...

I am talking about the settings area in the admin area of the applicaton.
Every setting there is descibed in detail. You get there and change serttings there via the web browser and by logging in as the admin.

Log in to the online demo as admin and check out the settings area if you are confused.
http://www.aspphotogallery.com/demo_pro.asp

Thanks for the info.  We'll do as you suggest.

NPA

Hello Chris:

Let me run some more test if it's working on your end it should be on mine?  I have made some custom updates to the code but no in that area.

Thanks,
-Ricardo

               Also, I’ve been trying to modify the code to adapt it for our application -- by removing fields that we do not need such as address, city, state, phone, but I am having trouble getting visual studio to compile.  It could be due to the fact that the rest of the project is in C#.  Or it could be due to some other factor in ASP Protect.

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

Dear Christofer

I already have send you the details you asked me for. Please let me know if you have received

ahh, I see..

that is not really something you should change.. it is pretty much always going to say read for any folder

It's hard to say, but adjusting settings like that could inadvertently change folder permissions in a way that could cause problems and be hard to correct. I really don't know that for sure but it is very easy to totally mess up permissions when trying different things. In the past I had to reinstall iis just to get things back to normal. I eventually over time learned what to do and what not to do and have never had a problem since. I am not saying you are one of those people but a lot of people have problems because they play around with things they shouldn't or they go nuts trying to give every account permission starting from root folders... overwriting important default permissions instead of just making changes to a few specific folders.. not understanding the importance of what they are doing..... etc etc

Sometimes you practically have to be a NT expert just to fully understand permissions. I know a lot and I can handle my own server but it's hard to explain the low level basic of NT permissions to others as there is a lot to it under the scenes. A lot of hard core NT/2000 users do all the permissions from the command prompt because there is a lot more control at that level.

Like I said earlier, what you showed me looks right but this isn't a complex issue and the error means what it means. Something isn't right with the permissions.

I would start from scratch if I were you. Perhaps consider doing an install in a new web instead of in your root like you showed me. Or try installing it on another machine for troubeshooting sake.

I am sorry I can't think of some amazing answer on this one, but I think this is just one of those weird situations that requires starting from scratch or trying it on another machine.

There are several pages on my website that a user may go to that are not protected (e.g. home page).  If the user has indicated that they want to be saved on this computer (until they explicitly log off), and their 1st entry point is to an unprotected page, how do I determine whether they have logged in before, and extract the info from the cookie / session variables without forcing them to log in or making the entry page protected?

LOL