This is a great article from my old powerasp.com site.
Connections And Server Database Permissions

Thank you....  yes it does

Is there a limit in the number of Zones you can have in the database.

thanking you

the sql databse is the same.. the sql script is the same for any version

as the site says they are essentially the same app with very minor changes... if you are trying to share the same sql database with both it's not gonna happen because the table names are the same

truthfully:
that app runs nealry as well with msaccess as it does with sql so I wouldnt get too excited about running it withe sql. You will not see any benefits unless you have a ton of simultaneus (sp) users.

hello,

There is no built in option. You would have to add code to do that.
Its not difficult but custimization like that is not something I support.

Hi,

I can't seem to find the code where it limits the upload file size. I want to limit the upload size to 1.5 mg for all users. Also I've noticed that the 500 pix doesn't seem to work. As in if an image is bigger than 500 pix the script still uploads it. i am using Upload_post_VBSCRIPT.ASP.

Thanks

Everything seems to work fine and I thank you very much for you quick response!!!

After I approve someone's username and password, then go to send them the default e mail telling them of the approval, the e mail never goes through.  The e mailing used to work well for many months, but it stopped working.  Any thoughts?

Spider

This has not been officially released yet, but it is ready.
Here is the overview...
http://www.aspprotect.com/demo3/paypal_signup2/overview.asp

And the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

A few people are using it and say it works very well.

Like the IPN Single Purchase System it is a separate directory you copy into the web site. One change must be made to your database so it’s pretty easy to get working. 

Though I am not guaranteeing this you should be able to accept Single IPN payments and IPN Subscriptions at the same time without the two bothering each other. I haven’t tested it but one customer is doing it and said it is working fine. It just involves manually specifying the IPN URL for one of the systems so it overrides the default IPN URL on your paypal settings. (As each system needs its own IPN URL) Its easy to do… just a form field you would add to the subscription form. I already looked it up. See below. 

Specifying Your Notification URL

If you only need to receive your IPNs at a single URL, you can enter that URL in the Preferences section of your Profile. If you would like to receive payment notifications for different payments at different URLs (i.e. if you need to separate payments made to different websites you run), you can manually pass the IPN URL with each payment by including it in that payment’s HTML code. Use the notify_url field to pass this information. The notify_url for a specific payment will be saved, and any subsequent updates to that payment (e.g. cleared eCheck) will be sent to that notify_url. When you pass a notify_url in your HTML code, it will override any preferences you set in your Profile. 

Anyway.. the Code for the IPN Subscription Pack is 30.00.
http://www.aspprotect.com/ipn_subscription_support_pack.asp

Let me put it this way.

My home page (default.asp) is an unprotected page.

When a user that has signed in on another (protected pages) and has the remember me checkbox checked closes the browser cookies should be set for the next time they return.

When the user opens their browser and returns  to my home page (default.asp), I'd like to put a message saying:
Welcome back <%Session ("Username")%>

How is this done?

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/default.asp, line 287

I'm doing an upgrade from an OOOOOOOOOOLD version (not sure if it was 6 or not) and it read my database OK prior to adding a new user. Now I get this error message. I was able to run the password encryption function OK, but I still get this error when I try to view the password_admin stuff. I can log in via the "get_me_in" asp page just fine, but I get the above error.

If I try to log in with my admin account, I get

ADODB.Recordset error '800a0cc1'

Item cannot be found in the collection corresponding to the requested name or ordinal.

/aspprotect/password_admin/check_admin_inc.asp, line 166

*****

OK, my question is this... if I retype all the info from the old DB into a brand new one, never before used, that would work, right? I only have 108 users, so that's about an hour of work. Or is there a 5-minute fix that I can try? I've done some messing around that got nowhere and returned all edited files to their original state, with the exceptions of the ones calling the DB location.

I'll start the C&P process and await your reply...

On a side note, I really love the new format and am excited about the new features. I'm not married to upgrading the DB and if copy and paste is faster (I just need first name, last name, username, password, email, and expiration date), then I'm using v.7 that much faster.

a. Sorry for the missunderstanding

b . Im running XP pro and done what was explained

c. The iis stops responding - Till I make iisrest

thanks

Ran

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

Thanks for your rapid responses, your support is excellent!

It may be best that I stick with html then. You mention that is stresses the Version 7 software, would the unlimited version perform any differently if I use multiple zones?

Also, if I do go with a single zone, would either program be able to make sure each banner is unique, or would there by duplicates for each page view?

Sorry to post so many questions in one day.

I cleaned up the code as you suggested, and I still can't get the images to display without the whitespace around it.

How do I download the ASP version?  I'll give it a try.

Thanks for your help,
JDooley

One last thing..

This is bad

http://www.bones.myftpsite.net/rfamilystuff/pictures/

there are .asp files in there people can run that you dont want people running..

u should delete the asp files in there or turn off directory listing...

take care,

CJW

ya, thats basically what I was gonna do..

BTW.. if that other app is going crazy with an access database it could be the cause of all the slowdown with ASPProtect... what happens there is it is using so much database driver time that it robs other things that also access a database... so basically ASPProtect isn't asking its database for much but your other application and database are cripping that part of the system and causing it to run like crapola

If your other app is using a system dsn try changing it to use a dsn-less connection... it might actually help

I just purchased the software and it looks great however, I have been fighting for 4 hours trying to get a protected page to do what it is supposed to.

I was trying the examples you provided and they worked fine, then I would use the code at the top of my pages with no luck.

When I installed the software, I used an FTP package as I have found lately that anything with a database gets all messed up when I publish with FP.

On a whim, I took the page I was publishing in FP and published the same page with my FTP program.  It worked!  What I can't figure out is what FP does to the files to screw them up so they won't function.  Is there a setting in FP that I have to change to get it to work?  The files look the same, but they are different sizes when I overwrite them with FTP.

Any ideas?  I don't want to have to publish my entire site with FTP as it is a FP template site.

Thanks,

Dave

I'll try to help when I get back tues night,, see the contact page for info on where I am .
http://www.cjwsoft.com/contact/default.asp?Subject=CJWSoft+G eneral+Inquiry

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

Can I have the logon be in a top frame while having the protected pages displayed in a main frame?

Using frames with forms based authentication is not the best thing to be doing. Your much better off not using frames and using includes files to do a virtual frames sort of thing (search google) but if you are going to use frames I would suggest password protecting the frameset page as well as any pages it contains.

If you want to have a login form in a non protected top frame all the time.. that posts to a lower frame that is password protected.. you would do this
http://support.cjwsoft.com/code/moreinfo169-1.htm
but change the target of the form to one of your frames

personally though I think that would be a somewhat goofy setup to have going on


Also, how will it behave if a user moves in between a protected page to a public page and back to the protected page again?

As long as they have cookies enabled which is required for session variables to work... then you will have no issues because once they come back to a page they have permission to they will just be allowed in without login.. at least while that session is still active.. or for a longer time if they choose the remeber me option which keeps track of them with a cookie .

Really, the best thing to do is expirment and see how things behave.

ya,

any variation of a site url is going to have its own set of application and session variables.. soy you have to be consistant with your navigation links

example (for anyone that comes across this thread)

http://www.examplesite.com/somepage.asp

is going to have a different set of application and session variables then

http://examplesite.com/somepage.asp

even though they are basically the same page

Hi,

Could you please advise what may be causing this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x57a4 Thread 0x5474 DBC 0xf03a704 Jet'.

/ASPProtect/check_user_inc.asp, line 292

Funny thing is that if I refesh the page with the above error it gives me the following eror:

/ASPProtect/check_user_inc.asp, line 292

and after few times of refreshing the page it shows me the page I am after.

Is this my promlem or ISP's.

Thank you

Hi, its just not something i can suppport as I do not support custmizations to the code epecially when dealing with an image component that is not supported by the application.

Sorry, its something you have to figure out. Bascially I would suggest looking at the existing asp image resizing code and using that as a guide.

Have you considered just buying a license of ASPImage and asking the host if they will install it after you purchase it. It sounds like it may save you a lot of time.

If you are ever looking for a good host for ASP. www.alentus.com is one of the best. There 9.95 plan gives you access to 3000.00 of commercial quaility asp components also which is nice.

ITS WORKING

...I have earned a beer (dont tell anyone im underage)

If you are developing using Windows XP Pro and running the NTFS file system setting proper permissions on a folder in your website requires that you 1st disable simple file sharing.

To do so open up "my computer". At the top open up "tools/folder options"

Then the "view" tab.

Then at the bottom uncheck "use simple file sharing"

After that that is done... using "my computer" browse to the folder in your web that you need to set permissions on.

Right click on that folder and then choose the "security" tab.
(If simple file sharing is on that tab wont be there)

Give the "Internet Guest Account" Modify Permissions
This will check all the boxes under modify as well.

You can also give permissions to the everyone account and accomplish the same thing.



BTW:
If you are using ASP.NET you need to give permissions to an account called ASPNET. It wont show up in the user list. You'll need to click "add" and then type in "ASPNET"

i downloaded the latest version. i also downloaded the sql script provided and ran in sql query analyser to create the tables.

After that i ran a special page to intially get into the system,

then setup a new user, then make them an admin,

and after that i logged out and again when i try to login iam not able to login.  When i check the ASpp_User table I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0. But if the value are Nulls or 0 it means it's not active and it's not allowing me to login.

Pls advice

Parent Paths ?

http://support.cjwsoft.com/forum/forum_posts.asp?TID=5&P N=1

it has been 3 days since I logged myself in under Admin, and all the user information on the User Activiy screen seemed to be gone.

is there any specific length of period it refreshes its user information??

This first one may be an obvious one, but is it only .asp files that I can protect as in no HTML files.

Can the program be set to protect my whole https directory contents (though the answer to the last question may have bearing here - there are html files as well as .asp in there) as in http://secure.mydomain.com

Thanks in advance