The Pop-Up Javascript Date Pickers will only show up of your server's regional settings are set to one of two lCID values.

1033 which is English - United States
mm/dd/yyyy date format

or

2057 which is English - United Kingdom
dd/mm/yyyy date format

Many servers are set to run the default LCID which is 2048 so the banner system will not show the date pickers.

This setting can however be easily overwritten when using the ASPBanner system.

or

Session.LCID = 2057

depending on what date format you are looking to use

Save the file and go edit a banner. The date pickers should be there now.

I did everything mentioned here but it do not work ;(

Running in parallel for testing is actually a smart way to do it, but the truth is you don't use anything from version 6 except the upgraded database (we have a tutorial on how to upgrade the database)

Version 7 was a drastic change /rewrite to all of the asp files that come with the application. So you will be starting out with fresh version 7 ".asp" files and folders... You will also find that once you get version 7 running that editing certain things like the look of the users area and the login screens is much easier to do.

That being said any of your own ".asp" pages that you protect use the same protection code they always did, so there will be no drastic changes needed there when you do finalize the upgrade.



If using MSACCESS as the database I suggest installing the application somewhere in your web and using a fresh ASPProtect 7 database. Once you are familiar with the setup and everything is working fine. Attempt the database conversion and when your done stick your converted database in there and see if everything is ok.

Also, if you already purchased the application download the latest version before doing the install. It's the same download URL. If you don't have it email me and I can hook you up. I have added some new features and fixed a couple minor things since it's release.

So far the feedback on version 7 has been awesome..

Regarding (ASP Photo Gallery Pro)

If you are looking to import a very, very, large number of images, the upload feature might not be sufficient for you. I have done some work using a unix terminal to be able to upload as many images as I would like by simply placing the images in the directory and renaming the images. There are other ways to rename the images, but I am very familiar with Linux, so I chose to do it this way. If you are running Linux, MacOS, or another Linux-based OS, you can simply pull up a terminal and run the following command in the appropriate directory. If you run Windows, I'd suggest CygWin, which creates a Linuxenvironment (Linux shell). It can be found at www.cygwin.com In order to be recognized by the ASP software, the images must be in the format of pic_"Album Number"_"Picture Number".jpg . Therefore, the following code is run to accomplish the file name change (on one line without wordwrap):

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}'
This command will change all files beginning in "DSCN" to "pic_9_*Picture Number*".

This does have a slight problem however. If there is a large number of pictures, 0's become a problem. For example, if there are 200 pictures, picture 1 will show up as pic_9_001.jpg. This can be fixed by the following command, which will eliminate unneccesary 0's (All on one line once more):

ls -1 --color='never' pic_9_0*
|sed 's/_0/_/g'
|sed 's/pic_9_//g'
|sed 's/.jpg//g'
|awk '{print "mv pic_9_0"$1".JPG pic_9_"$1".JPG"}'

This command eliminates 1 zero. It should be run as many times as needed to eliminate all zero's.

Please Note: These commands will only show the resultant set (The list of picture names). In order to execute them, they must be output to a shell script using the ">" character as follows:

ls -1 DSC* |
sed 's/DSCN//g'
sed 's/.JPG//g' |
awk '{print "mv DSCN"$1".JPG pic_9_"$1".jpg"}' > temp.sh

Then, the shell script must be run using the following command:

sh temp.sh

This might take a few moments, depending on the amount of picture names that are being changed.

IMPORTANT: BACK UP all files before changing file names. Also, view the resultant sets to make sure it's what you want before outputting to a shell script.

If you have any questions, please feel free to post or e-mail me @ JPortnoy@checkernet.com

"save_pic_desc.asp"

in both the admin and users area needs to be edited

You'll see something like this...

If Len(Image_Description) > 250  Then

just change 250 to something higher.. I wouldn't go much over 500 though as it may cause problems.. I am really not sure.. Changing it higher is done at your own risk.

This is great documentaion for windows script 5.6
in windows chm file format for jscript and vbscript.

We use server side vbscript in all our our ASP 3.0 applications so this info can be a lot of help.

2005-02-18_150921_vbscript_docs.zip

Now I am having trouble using the log function. 

I have checked the box in administration area for UseLogFiles.  I have put the expected path for the LogFileDirectory in the box.  I have modified the permissions for the anonymous web site user to modify this directory.  However the log file does not get updated and there is nothing when I go to view the logs. 

thx

Hello,

Sorry
No, there is not.

not the way the code ships.. The program keeps tracks of everything by the way it ranames files. The system has been tested to work well with as many as 10,000 images files. Any more than that and you need something a little more serious meant for that amount of images.

You could certainly modify it do work that way if you are good with source code. There are actually as many drawbacks as doing doing it that way as there are advantages.
Take Care

ASPProtect protects ".asp" pages only.

That is your problem.

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

>>I should also mention that the paypals scenarios used in ASPProtect can not be tested using PayPal's sandbox.

>>Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts) then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Yeah, been messing around with that.  Got everything going except the return page which I can't do until the site is live. 

>>Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect.

Ok.  Will email you with a username and password for access to the site once it's live. 

Sounds like a great add-on for ASPProtect!

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

Aspprotect issue

I need the ability to allow users to view url links on a page, based on the

group(s) they are a member of.  If the user is the member of one group (group 1 in the following example) the code works fine.

<% If Session("GROUPS") = "*1*" then %>  "view link #1"

However, if the user is a member of more than one group (let's say 1 & 5), I cannot make the code work.  

I have tried various versions of wildcards, nothing seems to get me there.

I fairly new at ASP, and I am sure I'm missing something simple.

Any help would be appreciated.

Triple check the upgrade instructions because I think you missed something important.

line 227 on "/password_admin/save.asp" refers to the "Password" field

the error your getting most likely means it is not there..

Pay close attention to the areas in the upgrade instructions regarding renaming your existing "Password" field to "Old_Password"

Then making a new "Password" field and carefully following the instructions needed to convert your old passwords for use with the new system.

If you don't everything carefully and perfectly this is the sort of error you will get.

You might just learn something and actually get your project finished before 2010

your over there hacking away on your virus infested WaReZ machine

LOL thanks for the good laugh-- i guess its time to do some reading and making my own mods to the program..

btw i never insulted cafrepress.. not sure where you got that from- just advised that what they have is exactly what i want to have done. How much for your service?

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

When that link is clicked on it will then track the click and redirect the user to the “link url” specified for that banner. 

The system actually generates the necessary ASPBanner URL for you. That link is shown on the banner edit screen.(you must save the banner at least once and come back to that screen to see the link though) 

Really the best way to show it is with an example as seen below.

Basically the flash banner file "powerasp.swf" highlighted in green needs to be edited to link to the banner redirect url which is highlighted in red.... the banner redirect url will then track the click and ultimately send the user to the Link_URL highligthed in blue.

All banners systems work this way when it comes to flash files.
It’s the nature of flash and the web browser, 

The flash source code must be edited to link to the redirect url in the ASPBanner system. There is no possible way any banner system can track a flash click unless the flash file links to the banner system 1st.... because that click is handled by Flash and the web browser. 

In some cases if you do have the original source file for the flash banner then you are out of luck as far as tracking clicks goes.



On a side note... if you create flash banners the way this article says you can actually feed a .swf flash file a link for it to click to. Instead of it being hardcoded.

http://www.macromedia.com/resources/richmedia/tracking/desig ners_guide/index.html

This is really the way everyone should design their flash banners from now on because the url it links to can be easily changed at any time without editing the flash file source code. 

From: Mo Afifi
Sent: Sunday, October 23, 2005 4:47 PM
To: CJWSoft Support Info
Subject: Re: CJWSoft Support Info : SSL - Verisign Certifcates

Both the NET and Classic ASP versions of this application are designed for fine granularity protection of individual apsx extension files. ASPProtect.NET is not designed or intended to protect sub directories, or non aspx content such as Adobe Acrobat .pdf files etc etc.

I completely disagree with your statement that “most sites” have a login box on the left hand side of the page. I suspect you thinking of the ever popular php based forums and “Nuke” type CMS systems which are set up that way but if you look at any site written entirely using .NET that’s rarely if ever the case. (Granted I cant say for sure because I personally haven’t looked at >50% of the estimated 18 billion +  web pages on the internet) Just off the top of my head www.CafePress.com come to mind as a pure .NET site. If you take a look the login button it takes you to its own login page there is not global login form used throughout the site. Reason being that .NET introduced this thing called a “view state” which is used to store things like your session ID (and way more) and must be posted back to the server in order to keep track of visitors. This technology comes in especially handy when you have a web farm in place and your content is being spit out out by more than one server at the same time

I can think of loads of scenarios where the web servers need to know who you are even though you are never directly contacting them via http. This approach is a very smooth and actually very clever solution for enterprise level websites that simply can’t be handled with a single web server.

 On a practical level I know what you are saying but that application sets up all sorts of things when a protected page is accessed and the user is not yet authenticated. That’s the entire reason you need to put that snippet of code at the top of a page you want to protect. That code snippet calls the ASPProtect.NET class and runs through all the logic to see if you are able to access the page. If you are the subroutine exits and the server continues to process the remaining logic on the page. AKA you are able to access its content. If you are NOT authenticated ASPProtect will setup all the proper session and viewstate info and redirect you to the login page for authentication. You may have also noticed a parameter on the login page called ReturnURL. The application looks for that info and if you do have a user ID and password the application automatically redirects you to the page you were trying to access in the first place.

Really I have no idea what you are trying to do, but there is a world of difference in how something looks verses how it works. Lets just say there was a simple way to do what your thinking, what are you going to do with that login form after the person logs in? Just keep displaying it on the entire site so people get confused and don’t know if they are logged in or not? Just that little part of the equation will require making some changes to either ASPProtect.NET or your application will have to have some logic built into it to stop displaying the login forum.

It sounds to me like your basically looking for a super simple 101 type deal that allows people to sign up for an event and you the admin can see that information? I’m guessing they can also log in again and check out their details and see what event they signed up for?

If that’s the case you’re trying to take a very sophisticated protection application and downgrade it into something that would be one heck of a lot easier to write all from scratch in about an hour.

Your not going to be able to “plug and play” a simple form into a page and turn that application as a magic universal login solution for a website, while its 100% possible to use the application that way if you choose, you need to check out the source code and plan your custom integration accordingly.

I am successfully using ASP protect on our site. I have one question:

The file Check_user_inc.asp looks a bit bland as I can't seem to use the sites Dreamweaver template. If I apply a template to this page, it is duplicated on other pages with this template.

How can I apply a template to this page?

Thanks

Clark

I noticed that is grabbing the wrong URL for some reason. Even when i mouse over the URL its somehow getting the users sub directory. How.. i dont know... when i erase that users in the url it works perfectly.

I am looking at the code in the .vb file and i dont see anything that could be causing it to do that... but then again i am no programmer LOL

Its obviously kicking in that users subdirectory somehow... what are your thoughts?

I have activated both activity and log files. The directories exist on my server and don't give any errors.

When I check the activity tab, some times there are a number of items in it.  Other times, there is only my login info.  From what I can see, it is supposed to show the last 50 items of activity at all times.  Am I missing something?

Also, when I click on the log file tab, there is no file or information to see.  Is there something I need to do beyond activating it in the settings area and making sure the directory has write permissions?

Thanks.

I have one file called asplistings.sql but I have license for ASPListings_auto and ASPListings_real_estate.  I really want to use the SQL server for both.  Please advise how?

Thank you.
Lance

Version 8.1 can work with MySQL
http://www.aspbanner.com/aspbanunlimited_v8.asp
It is just not supported at all.

The standard version can not work with MySQL.
There were a lot of changes to make the new version work with it and I really only did ift because I have a couple friends with busy sites that could only use MySQL.

It sounds like your site is way too busy for using an access database as you mentioned.

Everything is running fine.. I can read ads... reply to them. but when I click sign in or register.. I get a server error.

Any suggestions

Thank You

Thanks for your rapid responses, your support is excellent!

It may be best that I stick with html then. You mention that is stresses the Version 7 software, would the unlimited version perform any differently if I use multiple zones?

Also, if I do go with a single zone, would either program be able to make sure each banner is unique, or would there by duplicates for each page view?

Sorry to post so many questions in one day.

ASPProtect v7.x runs on Microsoft IIS servers only.
That means Windows XP Pro, Windows 2000 server and Windows 2003 server. The web server must have ASP support enabled and support Data Connections. 99% of them do as it's a pretty normal thing, but you should ask and make sure your hosting plan supports it.


Before you even start please read this thread and do what it says.
If any errors show up it is important you see the real error instead of a useless HTTP 500 internal server error.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=11& PN=1

Once doing that make sure to use Internet Explorer as you follow along with these directions.

Now, unzip your installation zip file that you downloaded from CJWSoft.
Use a program like winzip and be sure you have it set up to unzip the directories as well. You can also use windows xp's built in folder compression tools to unzip the archive.

When you unzip the application you should have all of the following folders and files. (more or less, it depends on the version)

Now, you can copy all of these files into the root of your website or if you like you can make a folder called "aspprotect" and put all of these folders and files in that folder. Either way it really does not matter.

Now, contact your web hosting company and instruct them that you need permissions set on the data folder that you copied into your website. This folder and all of its child folders need modify permissions set on it for the anonymous webserver account. It is very important that they set the permissions correctly and on all the child folders as well.

Here are some threads on exactly how these permissions are set.
If you run your own server or are developing locally you can do this yourself. If not most likely you need to put in a request to your hosting company as you CAN NOT set these permissions via Frontpage or FTP.

Windows 2003 Server and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=136& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Windows XP Pro and permissions
http://support.cjwsoft.com/forum/forum_posts.asp?TID=56& PN=1

Once permissions are set.. run this page via your web browser

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.

When this page is run it will report back a screen like so:



Now, take the connection string info it shows you.
Edit the "dataconn_inc.asp" file in the root of the ASPProtect system and use that data connection information. It should be valid for the server.

If you are using MSSQL server instead of Access please see the SQL database creation directions as you will need to create the MSSQL database and use a special connection string for that.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=160& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1

Now, take the CookieEncryptionKey and PasswordEncryptionKey info that it gives you and enter it into the "config_inc.asp" file in the root of the ASPProtect system. These will be the unique keys that your encryption will be based off of.

Ok...

The files have been copied to your website, the permissions are set on the data folder, and the database connection is ready.

Now.. run this page

http://www.mysite.com/password_admin/get_me_in.asp

Replacing the part in blue with your website info.

This is a special page we use to get into the system for the 1st time.

If you get a nasty error when you run that page similar to this.

Error Type:
Active Server Pages, ASP 0131 (0x80004005)
The Include file '../dataconn_inc.asp' cannot contain '..' to indicate the parent directory.

Then parent paths are disabled on the webserver and you need to do an extra step to deal with that. Follow this link.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=162& ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ;PN=1&TPN=1

If you get any other variery of "80004005" error then there is a problem with your data connection.
http://support.cjwsoft.com/forum/forum_posts.asp?TID=27& PN=1

Those errors are usualy related to database folder permissions or an imcorrect physical path to the database file specified though they can mean a lot of things.


Once you get the page running you will see a login prompt and one form field

You will need to paste the "PasswordEncryptionKey" value that you used in the "config_inc.asp" file in the form field and hit enter.

If all goes well you will see the admin area of ASPProtect.

Now that you are in the system you need to create an admin account.

Click on "ADD NEW USER".. fill out the info and add a user.
You really only need to fill out (first name,last name,email,username,and password)

Now save that user.

You should see a new user listed in the admin area. Click on Edit user to the left of the new account. On the edit screen check the "admin" checkbox and save the user.

You just created an Admin account.

Now click on the "log off" button on the top menu and click yes to log off.

Now close the browser. Then run this URL

http://www.mysite.com/password_admin/default.asp

Replacing the part in blue with your website info.

You should now be able to in to the admin area of the system using the new admin account you created.

You are now ready to go to the settings page so click on the settings tab in the menu. There are a lot of options and paths that need to be set on this page. Every setting is described in detail on this page. You need to go through the page and set things up properly. Anytime the page asks for a path to a url or file the page will auto generate what should be the path to use. (expected path) If your server has parent paths disabled a few of those auto generated paths will not show up. If that is the case run this url from your server and it should tell you the paths to use for those settings.

http://www.mysite.com/data/expected_paths.asp

Replacing the part in blue with your website info.

Once your all done and the system seems to be running fine you should go back and delete the following pages as they are no longer needed and pose a potential security risk.

http://www.mysite.com/data/setup_info.asp
http://www.mysite.com/data/expected_paths.asp
http://www.mysite.com/password_admin/get_me_in.asp

You should back up the original zip archive you got from CJWSoft in case you ever need those files again.

VERY IMPORTANT: The user passwords from now on will be encrypted using the "PasswordEncryptionKey" you specified in the "config_inc.asp" file.

If you ever change that key all of your passwords will be invalid and you can not get them back unless you know the key and put it back, so plan on never changing that key unless you really know what your doing and know how to decrypt/re-encrypt the passwords using a new key. (something we do not cover at the moment but probably will when we have time to make a tutorial)