I am a little confused here.  I am in the process of understand how this all works, mainly the email portions as I am running this through a home server (Windows XP).  I have tried test emails, but they are not going threw.  I ran the server_info.asp and it is telling me that I do have CDONTS installed, version 2.8.  Then I tried running, the test_mailer_component.asp.  This page is telling me it is not installed.  This process lead me to start looking at my components for my IIS.  Everything appears to be there. 

Any ideas, where I should go next.  It appears the CDONTS code is in every page that it needs to be in, and it appears that I have it installed, but there is a disconnect between the two..

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

Well I have the web hosting tech looking into the memory issues at this point.  Unfortunately I don't have another machine to be able to run the asp on that would run it correctly so that I can just publish it over.

Hi - When I try the mass email feature, I get an error that says:

ODBC Microsoft access driver) too few parameters expected 1

/aspprotect/password/admin/send_mass_email.asp line 280

Oddly...this feature works fine when I use the original admin user that you setup. 

But I setup another one with my username and password (not test) - because I was afraid anything with "test" could get deleted. 

Any ideas on why the new admin userid would not work?  Note: I have not change any code from the original installation.

From: Mo Afifi
Sent: Sunday, October 23, 2005 4:47 PM
To: CJWSoft Support Info
Subject: Re: CJWSoft Support Info : SSL - Verisign Certifcates

Well. fontpage publishing is evil. That you have found out.

Do not use it. It usually wont work right when running asp code locally and also at the server because of differences with the paths and virtual directory structure. etc etc etc

You can definetly use frontpage to connect to the web site live and drag and drop files into it/edit them... but the sooner you stop using the publishing feature the better off you will be.

its a text file   you just edit it with notepad..  if ya mess it up ya put an original copy back in

no biggie either way

jump in there..

I just showed ya exactly what to change.. its a no brainer man
This is simple source code. It's meant to be edited and hacked.

The only reason I warn you is so you can't blame me later on if it effects something

I am just trying to help

If ya dont like that solution why not just use periods for the first name field.. or a dash or something... then nobody will really see it

or maybe store the company name in the first_name field

seems like clever things to try without changing the code..

good luck...

When I attempt to upload, it appears that the image uploads. I get a "Original Image Size 0 X 0 pixels"

they don't appear in the web pages, any thoughts? I am using VBscript to upload, my host has safileup but I am unable to use it in this script, thanks for any help

http://mcintoshcounty.org/real_estate/extras/server_info.asp

here's the site link

Never mind, had the path to the image folder screwed up 

Hi all

User activity screen shows history of logged-in users.

Is it possible to view only those users that are currently logged in ? not the all users that have logged in previously

thanks in advance

I'm using ASPimage and have the maximum width set to 320 in the settings.  Also using SAFileUP ver. 4.0.

Files upload okay, and the script displays a confirmation that the image was resized to 320, but the actual image uploaded is displaying full size rather than reduced to 320.

Also, the thumbnails are not displayed in the Picture Manager. Would indicated ASPImage is not working or the script is not communicating with it.

Suggestions?

Something very strange is happening.  Some users can't see the classified ads in their browser.  This is specific to the user's computer, and they can check other computers and see it fine.

In each case, the user is using windows explorer 6.0 browser with windows xp.

they can't see the ads listed on the ads page, but they can see the categories.

also, they can't see the place ad link on some pages.

Do you think that their browser is blocking the javascript for the mouseover message?

thanks.

What other information do you have ?

Details are very important.

Info on situations where it works... like OS, browser version.. etc etc

Info on situations where it does not work... same stuff

size of the PDF files ?

server info ?

Maybe protect a page and offer a PDF file so myself and some of the forum users can try it and report back what happens.

Also, Many people zip up PDF files when letting people download them as browsers can act pretty odd at times with them. Perhaps that is an option.

ITS WORKING

...I have earned a beer (dont tell anyone im underage)

It's probably something I could do for you as a custom project if you are interesting in paying to have that work done, but it is probably not something that will be added to this version of aspbanner as it is in my opinion a feature more suited for a more expensive software package.

It is also difficult to get ASP code to do things on it's own. Scheduling something to run on the server or some other clever scenario is necessary and that usually means it would be unique to each persons setup.

http://www.cjwsoft.com/custom_work.asp

Ok time for some more questions!!!

Is there a way to make the person's email address their default username... or force it in somehow instead of allowing them to create their own?

Hi Chris,

I have a small problem, I have installed asp photo gallery pro on a hosted site, and after eventually getting them to modify permissions on directories it is essentially working, except that it won't delete pictures from an album. If I delete an album the pictures are left in the pictures directory, but the album is no longer displayed. If I then make a new album it is labelled incrementally... ie I had one album "album_ID_1", deleted it created a new album it is labelled "album_ID_2". I would have thought that the new album would be called "album_ID_1" ie taking the place of the deleted one. It seems to me that the delete album function isn't fully working either. My hosting comppany swears that the permissions on the pictures directory are set to full access for everybody. What have I done wrong?

Thank you

Nigel

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ; ; ; ; ; ; ; ; ; ; ;PN=1

The 2Checkout Support Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement 2Checkout Payments with ASPProtect. You must be using version 2 of the 2checkout system. They are phasing out version 1 regardless so everyone will be using version 2 very soon if they are not already.

THIS IS NOT INTENDED OR DESIGNED TO USE 2CHECKOUT SUBSCRIPTIONS. (see bottom of this thread for more info on that)

This Support Pack basically gives you an additional signup and registration directory "2checkout_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup in general. New users can register in this directory and pay for membership at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and buy additional membership time online. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via 2Checkout your system is updated and they will have access.

The 2checkout pack is NEW.. and was released on March 19, 2005. If you don't have it and would like it please just ask.

To start using this edit the "2checkout_signup/2checkout_config_inc.asp" file

You will be entering your 2Checkout Account number in that file as well as the URL you want a user to go to after payment. It is all commented in that file. (There is also a testing variable you can set to True if you want to do testing without real charges being applied)

After editing that file run this page.

http://www.mysite.com/2checkout_signup/show_postback_path.asp

Replacing the part in blue with your website info.

It will report back that postback url you need to use in the 2checkout system.

Log into your 2checkout version 2 account and under the "look & feel section" enter that postback url for both the "Approved URL" and the  "Pending URL"

Trust me: You want the URL there for a pending URL because the 2Checkout system is quite random and 95% of the payments that come in go to the pending URL and end up being legitimate sales. (at least for me they do)

Now make sure the Direct Return option on that page is on as well. 

If set to Yes buyers will be immediately directed to your URLs below once they click the Complete Order button. If set to No the buyers will have to click a button to return to your URLs below.

Save that page... and leave 2checkout.

Now, delete this page from your ASPProtect setup.
http://www.mysite.com/2checkout_signup/show_postback_path.asp

It's a minor security risk and is no longer needed needed.

The basic setup is finished. All you have to now is set up payments options the way you want them.


Changing Payment Options

In the "2checkout1.asp" file there are form options set up.

They look like this and you can have as many as you like.

<option selected value="30,9.95,3,">30 Days, 9.95</option>

In this option... A user has the option to purchase 30 days for $9.95 and he will be set to Access Level 3 when payment in completed.

Here is how it works.

The value setting (red) is essentially and array that can be made up 4 elements separated by comma's
They must be separated by a comma and there can be no spaces. In this example the 4th value was not used but the last comma must still be there. If you didn't want to set an access level and left out the "3" there would 2 commas at the end.  etc etc
Basically there must always be 3 commas but you only have to set the 1st 2 values which are days and price.

days,price,access level,groups

The 1st value is the amount of days.
The 2nd value is the price for the amount of days.
The 3rd value is the access level you want to user assigned to.
The 4th option is the groups you want the user assigned to. (see PayPal subscription thread for examples of specifying group info)

Now, the label for the option in (blue) can say whatever you like.

Hello- I am trying to install the ASPPROTECT product and tried to read all the docs but still am getting the following error:

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x1980 Thread 0x1458 DBC 0x223c374 Jet'.

I understand about the physical path for the DSN-less connection and followed the example given. I got in touch with tech support for the host of my site and the give me the following as a physical path:

c:\sites\Single20\laptv1\database

Some observations:

1.- The database directory is outside the root dir but I think I am accounting for it with the path

2.- The permissions are ok

Any ideas?

Thanks

FP

If things are not perfect there will be no log files and no errors.. it can only be one of these things really
http://support.cjwsoft.com/code/moreinfo313-2.htm

You may also want to make your the filesystem on the server is working and not disabled by norton script blocking or anything random like that. Testing the filesystem object is best done by writing a simple text file to a folder. Plenty of examples of doing that can be found at www.aspin.com

Recent activity is temporary and admin activity in the admin area is not tracked. If your application in IIS has reset or there has been no activity in the users area or in pages you protected there will be nothing there. The busier your site the more chance something will be there. For example usually our online demo has something there except right after 4am when my server does an iisreset.

New Power Supply and a new (CPU Fan/Heat Sink) seemed to do the the trick. She's running like a champ now...

Hopefully it keeps doing so. Only time will tell.

It she's stable I can get back to designing some new software.

How to set a new users expiration date.

You'll need to edit the "users/add_new_account.asp" with a text editor.

Find this section..

<%
CmdAddUser.Fields("ValidateEmailCode") = ValidateEmailCode
CmdAddUser.Fields("Access_Level") = "4"
' PUT YOUR CODE HERE
CmdAdduser.Update
ID = CmdAdduser("ID")
CmdAdduser.Close
Set CmdAdduser = Nothing
ConnPasswords.Close
Set ConnPasswords = Nothing
%>

You'll want to add code like this right between the Acccess_Level  and Updates section

CmdAddUser.Fields("Expiration_Date") = Date + 60

That will give take todays date and add 60 days to it.
You can of course do whatever you want here.

Actually, any database value for the user can be set during registration.

You can also change the default Access_Level to whatever you like.

thanks!! the file took care of the extra slash. I also fixed the problem by modifying the permissions.

dazed

Access to some sections of the forums must be requested.
Please Click on the following link and read all of it carefully.

http://support.cjwsoft.com/

I'm trying to use CDOSYS.

It seems to work fine on the web page, however the mail never gets
delivered.

I can see my messages sitting in c:\inetpub\mailroot\pickup but they never leave it.

I found another folder after doing a search for "pickup".... it is:
d:\program files\Exchsrvr\Mailroot\vsi 1\PickUp     If I paste the files
into there, they get delivered.

How can I get the email to be delivered without doing the cut and paste?

I've tried it both with and without authorization.

I am running a Windows 2000 server with Exchange 2000.

Thanks.

Does emailing work under the simplest scenario ? (directly from the users screen)

Thats the way to test it..

All that error means is whatever reason the settings you have chosen are not working. It could be the server. It could be what you chosen. (and yes I realize your pop info from outlook should probably work with the settings you chose)

Whenever I do installs I often have to try 3-5 different emailing scenarios before I come across one that works.

Each time making some changes and sending out test emails from the users screen until I get somewhere. Often time getting a working example of how your Hosting Company wants you to send email from ASP is the info to get your hands on. (what method and settings)

In this case they may have blocked the usee of a remote server and want you to use some other settings for sending email from asp. A lot of times they put that info in their help system.

If I were you I would start by trying the other two CDOSYS options for starters, and then try the remote server option again but using "localhost" as the server, if none of those work consult your host for example code and settings to send email from asp. If you still have no luck I can help for sure.

Realize too when testing the emails may take a bit to arrive. A delay of sorts. Best to type in a quick note about which method you are trying in the email text. That way when you finally get one delivered you'll know which method worked.

I made the changes like you suggested, but now the page just times out before even loading. 

<%
ConnectionString = "DBQ=D:\clients\rklarman\DrWeisbergUsers.mdb;Driver={Microso ft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

I will actually explain how to set access_levels and/or groups...

in "users/add_new_account.asp"

grrrrrr

As far as the users thing... my fault that was setup wrong in the settings of the admin login page.

but still dont have a solution for what im trying to do

yes, like macnap says.... you have to protect your ".asp" pages the way the directions tell you to...

and like in the "example" protected pages we provide

or they will not be protected and nothing will happen as far as ASPProtect goes

I guess I just didnt understand what you were talking about