question 2 is answered best here

http://support.cjwsoft.com/code/code_info.asp?TID=319&KW =paypal

I should also mention that the paypal scenarios used in ASPProtect can not be tested using PayPal's sandbox. Also test using two real PayPal accounts and on a live setup. (You'll allowed two paypal accounts)

then you can log into the other and refund the transctions and of course it makes sense to use low amount like 1 cent and what not.

Also, I'd love to see what you came up with with the integration. I have been working on it here as well and took it in a different direction as I plan to sell directions for it as an add-on for aspprotect. I have it all working here but so far I dont see an easy way to let other people do it as I had to change things in both systems in a lot of places. Utimately if done under a SQL environment triggers should be used at the database level and that is another consideration.

Hello

I have a strange problem with the thumbnails in the ASPClassifieds.
If i upload some pictures in an ad, the 2nd picture always shows with an x, as the picture doesn´t exists. But if i click on the 2nd thumbnail, the picture shows okay. I haven´t changed enything from the original code.
Does anyone have any idea, where it goes wrong ?

With best regards, Erling Larsen

Hello,

It is very possible, however there may be some issues such as the session variables specific to a particular user would not be able to be created because there would not be a specific user.

I can't tell you exactly how to do it as it would probably take a few hours of messing around with the code to sort it out. Bascially, it's not something I could tell you how to do real quick and I do not support custimizations to the code.

But, it is very possible. You want to check the server variable for the IP address. The tricky part would be where and how this all just integrated into the "check_user_inc.asp" file

Whein I went by the numbers off of your directions, which work well up to that point, the import would time out.

At that point I tried to import directly into access...and then it hung trying to login.

okay so I've put in a clean database and created a new record for me as admin.

When I add a user, I can not activat it.

What do you have the registration type set to in the settings ?
They wont be activated automatically unless you have "automatically" selected ?

It sends me back to log on and will now allow me to log in as admin???

I am not quite sure I understand ? Seems to me like that would be normal because you can always log in as the admin at any time. If you cant log in as the user you just signed up as that could be for a couple reasons relating to the registration type you have slected in the settings. There are 3 types all epxlained in the settings screen. Some require manual activation byt the admin, some involve a registration email.. etc etc

I can restart the APP and log in as Admin, but the user I added
is still not activated??

How and why are you restarting the applicaton ? Please explain what your doing there.

My system will also not allow me to set the Stay Loged in FLag.
It just ignores it....

As I told you in an email earlier cookies must be enabled for authentication to work. You mentioned now you can not log off ? I am not sure I know what you mean by that. I assume you know to close all browser windows when testing things like this and I assume you know you have specifically log off and confim it in order to remove the remember me cookie and have to log in again when you return to the site.

I did everything mentioned here but it do not work ;(

I uploaded the files designed for an aspprotect folder at the root of my site (mysite.com/aspprotect) and went to mysite.com/password_admin/get_me_in.asp and receive this error:

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xf54 Thread 0x908 DBC 0x90c41dc Jet'.

/aspprotect/scripts/populate_config_variables_inc.asp, line 11

I am assuming my host has still not set rights properly and that is why I receive this error. Am I correct?

 I will definitely recommend hosting company you suggested for our businees site.

Hi, I am glad you like the system.
Thx for the comments..

The banner logic in aspbanner it tweaked for speed and performance.. that sort of thing really wouldn't fit into the current code structure very well. It would slow things down and be a nightmare to code because of the way aspbanner uses ultra fast application variables for the banner rotation. Basically its a feature I didnt incorporate for performance and pricing reasons.

I would suggest making different zones for different conditions.. then surrounding the banner calling code with if else logic so a different baner zone was called under certain conditions.

That way performance would not be effected and you could actually show a different group of banners based on certain conditions.

Sorry, but that is the best advice I can offer at this time.

I built ASPBanner for performance and at this time I refuse to sacrifice that for any feature that will slow it down and consume more resources.

ACCESS DENIED

INVALID Username & Password

Username HAS EXPIRED

I am a little confused here.  I am in the process of understand how this all works, mainly the email portions as I am running this through a home server (Windows XP).  I have tried test emails, but they are not going threw.  I ran the server_info.asp and it is telling me that I do have CDONTS installed, version 2.8.  Then I tried running, the test_mailer_component.asp.  This page is telling me it is not installed.  This process lead me to start looking at my components for my IIS.  Everything appears to be there. 

Any ideas, where I should go next.  It appears the CDONTS code is in every page that it needs to be in, and it appears that I have it installed, but there is a disconnect between the two..

It should be released sometime late May 2004 or early June 2004 but no gurantees as I am pretty busy right now with some projects.

There will be upgrade instructions and it should be a fairly easy upgrade.

Can you do a better price deal for that version in place of the one I've just purchased ie for a single licence rather than unlimited Christopher?

Or failing that can you give me an idea of how many changes you had to make to convert 7.3 to work with Mysql?

Regards,

Dave

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

Post a request in the "custom code work" forum.
Perhaps another customer will want to do the work or help you out with some code.

I am just too busy to do any custom work for quite a while.

its a text file   you just edit it with notepad..  if ya mess it up ya put an original copy back in

no biggie either way

jump in there..

I just showed ya exactly what to change.. its a no brainer man
This is simple source code. It's meant to be edited and hacked.

The only reason I warn you is so you can't blame me later on if it effects something

I am just trying to help

If ya dont like that solution why not just use periods for the first name field.. or a dash or something... then nobody will really see it

or maybe store the company name in the first_name field

seems like clever things to try without changing the code..

good luck...

Hello,

Yes, that is how it works. Unless you make modifications to the code there is no way to easily do what you are talking about.

If you design the site to be intelligent that scenario should never happen.

For example.. you should only be offering links to pages that the current logged in user has access to. You do this by checking the session variables and with simple if-else logic around your html links.

It requires some work but if you dont give them links to pages they dont have access to what you are talking about will not happen.

Here are some simple examples.

Here is an example using access levels.

<%
If Session("Access_Level") = "1"  Then
' show links to pages that allow access level 1
End If
%>

And one for groups..

<%
If Instr(Session("Groups"),"*6*") or Instr(Session("Groups"),"*7*") Then
' show links to pages that allow groups 6 and 7
End If
%>

I have been able to successfully edit some text colors, but there seems to be one page that wont change the text color. Inside the users/ folder, the login.asp page, i cant seem to change the text color from ffffff to 000000 so it can be read on my background color. Every page in the script is correct but this one.

Thanks.

Hi,

How do you know permissions are ok in that folder ?
Please tell me more on how they were set.

Please read through my article on how they are set correctly.
http://support.cjwsoft.com/code/moreinfo136-1.htm

Often times they are not set correctly or people thingk they set them somehow but in fact did not do it the correct way.

I would also suggest using the "test_physical_path.asp" page in the "extras" folder to verify if the path you are using to the database mdb file is in fact correct. That page should work whether permissions are set or not. At least then you will know if the path is correct or not and you can go from there.

Flash Code Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

http://www.banmanpro.com/support/flashgenerator.asp

(User Photo Upload Mod) for ASPProtect Version 7.x

This will allow an individual user to upload a user picture instead of just the admin.

Notes: This is a down and dirty mod. The user upload code was copied from the admin area and there are no safeguards. Meaning there is no limit on the file size a user uploads and there is no confirmation process in case something they upload is inappropriate. etc etc etc

If you want that you will have to work on that on your own.

Directions:
Back up your existing ASPProtect installation.

copy these files into your "users" folder

2006-01-24_111305_User_Upload_Mod.zip

I downloaded the skins, ftp'd them to the skins folder and can see them in the list of available skins. No matter which one I try to apply it keeps solid_color_black.

Al

When a new user adds themselves to the db thru the registration page, no user id is assigned in the User_id field.  I can't access the page on-line due to an user_id related error on the page.  I must use access itself and add the user id.  After that, everything works as expected.

What have I done?

i downloaded the latest version. i also downloaded the sql script provided and ran in sql query analyser to create the tables.

After that i ran a special page to intially get into the system,

then setup a new user, then make them an admin,

and after that i logged out and again when i try to login iam not able to login.  When i check the ASpp_User table I noticed that the values in the fields "Login_limit" and "Active" in the ASPP_Users table in the SQL changed to NULL and 0. But if the value are Nulls or 0 it means it's not active and it's not allowing me to login.

Pls advice

Dear Support Team

I have read and Installed your v8 banner software

exactly as explained on XP pro which contains other asp working app.

I have problems with the " Application " and " Session" in your scripts

things that make the iis fall dead.

also in the file asp _unlimited_config.asp

you have exlained that every thing must be kept without the "" marks.

well i get http 500 error cause of it.

Please advise

Thanks

Ran

Session.LCID = 2057

glad it is working now

sorry ya had trouble.

I purchased 6.0 in Feb 05.  Is there an upgrade price to 7.0

I spent considerable time setting up 6.0 to work with my web site. From what I read in the forum, it sounds like I have to start over again to integrate the new version into our web site. I do not relish the thought of that, but I have to move to an email system with a valid MX record.

Will I be starting over from scratch with this upgrade?

SQL Server Datareader Datawriter Permissions..

here is a screenshot that shows how to set datareader and datawriter permissions on an aspbanner database using "SQL Enterprise Manager"

In this example we are making sure the aspbanneruser has those permissions on the aspbanner table in the database

It seems that if a user attempts to access a page that is not in their access level or they do not have the group permission they are redirected to the login page.  Re entering their ID generates an eror and they cannot go back to the pages they are alowed to access.  Is there a way for them to simply be blocked and return to the previous page or to a defined page so they can continue using the site?

thankyou