Chris,

I have had a couple of users log out of the system as they are supposed to, move to another computer and not be allowed to login because of "they are currently logged in using another IP address" when in fact they logged off properly.  Is there anything that they should be doing differently?

Thanks,

Jess

Hi Chris,

Thank you for your prompt response.

Our current project requires alot of customization.

Yes, the error is probably a data problem and not due to your code, because we needed to make modifications to the database.  But that's why debugging would be helpful.

Basically our intent to modify the asp protect code stems from the fact that our client doesn’t want certain fields to be recorded or to appear: address, city, state, zip etc…

We are happy to be able to modify the HTML, but we also want to modify some other default behavior, such as which page opens when the "cancel" button is hit in the editaccountinfo.aspx page.

Chris,

Another question on V7.  I set up all the paths as required for the extras like user pics and exports on my site.  They were working fine.  I created an export, then as you recommend, deleted the file on the site to ensure it doesn't get in the wrong hands.  I did this a few times to test it after a number of people logged in.

About 2 days later, I went to do it again and the system came back with an error saying the directory didn't exist.  I know it did because I created it and it worked fine.  I then created the directory again thinking I was losing it.

Then today, I went to do another export and the directory is gone again!  Can you help me understand why this might be happening?  I am the only one with FTP access to the site so there is no way that it could be someone else doing it.  The error I get is:

Microsoft VBScript runtime error '800a004c'

Path not found

/password_admin/export.asp, line 78

Thanks,
Dave

For pay signups you set the groups during signup it like this thread tells you to

http://support.cjwsoft.com/code/moreinfo186-1.htm

only difference is you need to specify the groups info like so
(basically getting rid of the commas and just leaving behind the group numbers with a * around everything)

Also be sure to have no double asterisks

so, *1*,*2* would just be *1*2*

so, *1*,*2*,*5* would just be *1*2*5*

I getting a strange error with ASPProtect.

 Microsoft OLE DB Provider for SQL Server error '80040e14'

Unclosed quotation mark before the character string '¾_^Ö'.

/aspprotect/check_user_inc.asp, line 114

If I check the database directly "¾_^Ö" is the exact string for the password.

Any Ideas

Change the action of the form to the page you want them to log into.
Make sure the page you send them to is protected by the "check_user_inc.asp" file.

<center>
  <table border="0" width="400" height="200" bgcolor="#000000">
    <tr>
      <td bgcolor="#F4F4F4">
        <form method="POST" action="memberarea.asp">
          <input type="hidden" name="Status" value="Checkem">
          <p align="center"><font face="Arial">ASPProtect Login</font></p>
          <div align="center">
             <center>
             <table border="0" bgcolor="#C0C0C0">
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Username</font></small></stro ng></td>
                 <td><input type="text" name="Username" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB"><strong><small><font face="Arial">Password</font></small></stro ng></td>
                 <td><input type="Password" name="Password" size="10"></td>
               </tr>
               <tr>
                 <td bgcolor="#EBEBEB" colspan="2"><font face="Verdana, Arial, Helvetica" size="-1"><input type="checkbox" name="KEEPMESIGNEDIN" value="True">Keep
                   me signed in on this computer unless I log off.</font></td>
               </tr>
             </table>
             </center>
          </div>
          <div align="center">
             <center>
             <p>&nbsp;<input type="submit" value="Login"></p>
             </center>
          </div>
       
        </form>
      </td>
    </tr>
  </table>
  </center>

I am not entirely sure how one configures the system to assign a user to a specific group.  For example, let say I have created two groups A and B, and I have pages protected by the code generated in the admin area for groups A and B.  I know I can assign access to these groups in the admin area.  However,  it is not clear to me how I do it automatically through the registration process. 

ok,

IE and firefox do some things differently.

It could very well have to do with MIME types set on the server for your website. pdf probably isnt set as a mime type which can cause issues with file streaming situations.

Mime types are either set in the IIS console for your web site under the http headers tab or you can try setting the content-type header to 'application/pdf' right on the asp page the does the streaming

see this article which shows how to do that
http://psacake.com/web/gj.asp

'Specify a MIME type such as "text/html", "image/gif" or "application/pdf"
Response.contenttype = "application/pdf"
'Useful in cases for unknown file types

You would want to put the code that sets the contentype as close to the top of the asp page doing the streaming as possible.

Something very strange is happening.  Some users can't see the classified ads in their browser.  This is specific to the user's computer, and they can check other computers and see it fine.

In each case, the user is using windows explorer 6.0 browser with windows xp.

they can't see the ads listed on the ads page, but they can see the categories.

also, they can't see the place ad link on some pages.

Do you think that their browser is blocking the javascript for the mouseover message?

thanks.

MSACCESS 2000

server: windows

option pack: yes (after the install I have this problems with groups and edit users )

host permissions: yes

MESSAGGE:
Active Server Pages error 'ASP0113' Script time out/password_admin/groups.asp The maximum amount of the time for a script to execute was exceeded. ...

No can do.  In both cases there is an icon that says "Not uploaded".  I click in it and nothing happens.  There is no link to upload.  Am I missing something?

By the way, I appreciate and am impressed with your rapid response. Thanks.

((TITLE EDITED BY ADMIN))


it would be nice if there was an option for login abuse, where a login account would be flagged if it logged in from x number of different IPs over a period of time. I know many have dynamic IPs, but there's got to be a balance between legitimate logins and logins that are 'shared' for the sake of saving money (I sell subscriptions), in the end costing me.

Maybe searching the first two number groups in the IP (example, 209.168.*.*), and if finding more than an admin specified number of logins per week from IPs with different first two groups, the record would be flagged or locked...

SQL Database Creation (NEW INSTALL)

If you are creating a new database do so using SQL enterprise manager.
Create a new database called whatever you like and keep all the default settings. If using an existing sql database skip that step.

Now open up SQL Query Analyzer

unzip the following sql script and open it in query analyser.
2005-02-20_132116_aspprotect_v7_sql_script.zip

VERY IMPORTANT
On the drop down box at the top right make sure your intended database is selected. Otherwise your changes may effect the wrong database in your SQL server.

Then load the script  into the Query Analyzer.  Click the green play button at the top. If everything goes well the response should read something like this.

******************************************************
(1 row(s) affected)
******************************************************

If so the tables have been created in your existing database.

Now make sure an existing or new SQL user has (public / datareader / datawriter) permissions for the new tables. You will be referencing this user in the asp code connection string so this user must be set up correctly. You may need your SQL server admins or hosting company to help you on this step as you may not have access to do this. You may not need to create a user and set permissions as the sql user you were logged in as to use query analyzer may by default get the correct permissions on anything you create.

Regardless, as you can see from this screenshot I made a SQL user called "aspprotectuser" and proceeded to set the permissions for that user. Under database access giving him (public,datareader, and datewriter permissions).


Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and modify the connection string info. Be sure to change the info to match your server,username, and password.

Below is an example of valid connection string.

ConnectionString = "Provider=sqloledb;Data Source=poseidon;Initial Catalog=aspprotect;User Id=aspprotectuser;Password=temp;"

The  "Data Source" setting is either the Network Name for the SQL Server or the IP Address. For local servers you can sometimes use an IP of "127.0.0.1" or the name of the local server.

"Initial Catalog" is the name of your database.

Now, in the ASP files provided with ASPProtect edit "dataconn_inc.asp" with a text editor and set the DatabaseType variable to SQL like so.

DatabaseType = "SQL"

Ohhh...

I was thinking it worked like this; A user goes to that page and logs in.. and from there they can then browse the site and do what they want..

So in order for it to work i need to edit a page say... members.aspx (i assume it needs to be an asp.net page) and in the header put that protect code and when a user accesses it, it will prompt them for their un and pw and then if correct will allow them to view the page... and likewise if they are still logged in will be able to use the page?

If that is how to works as i mentioned above thats great...

I understand the redirect principle...but say i have a log in box on the main page... you know like most pages have a user log in on the left hand side... i wanted to do that. But i cant obviously protect the main home page or else normal users will not be able to view it without logging in or registering

The file check_user_inc.asp as the lines: (which include Session("groups")

 Here we set some valus about the user into session variables
   Session("PasswordAccess") = "Yes"
   Session("Access_Level") = CmdCheckUser("Access_Level")
   Session("Admin") = CmdCheckUser("Admin")
   Session("Active") = CmdCheckUser("Active")
   Session("Expiration_Date") = Expiration_Date
   Session("User_ID") = CmdCheckUser("User_ID")
   Session("Groups") = CmdCheckUser("Groups")
   Session("Redirection_URL") = CmdCheckUser("Redirection_URL")
   Session("Password") = RC4(CmdCheckUser("Password"), PasswordEncryptionKey)
   Session("Username") = CmdCheckUser("Username")

I am using v7 with other software written in ASP.NET. When I include the the "checkfor" and include file, I'm receiving a compliation error.

Here is the include I have on the .aspx file:
<% CHECKFOR = "4" %>
<!--#INCLUDE FILE="../../ASPProtect/check_user_inc.asp"-->

Here is the error:

From: Mo Afifi
Sent: Sunday, October 23, 2005 4:47 PM
To: CJWSoft Support Info
Subject: Re: CJWSoft Support Info : SSL - Verisign Certifcates

If you re-start the web via IIS, reboot the server, or (possibly) just add and remove a category... that will clear up.

ASPClassifieds and ASPListings must be installed in seperate IIS applications if they are the same web. Otherwise the category caching system of each system will interfere with each other. They were never intended to be installed in the same web together since ASPListings is merely a stripped down version of ASPClassifieds and they share a lot of the same code. Like I said though if different IIS applications are set up in the web site you can do it because each IIS application will have it's own set of application and session variables.

The redirection at 1st login feature is supposed to work like I explain in this thread.

http://support.cjwsoft.com/code/moreinfo385-1.htm

Though what you just said is a bit confusing it sounds like you have some sort of browser problem and it is doing the redirect every single time. ?

I would suggest reseting all your browser settings to normal and making sure cookies are enabled because forms based authentication uses session variables and cookies must be enabled for session variables to work correctly. If not something like this could happen as the redirection at 1st login would happen over and over every time.

So try it on other computers and try with firefox as well as IE. Many people go nuts with their browser settings and way too much stuff blocked which can cuse all sorts of issues. Also some script blocking and firewall software can cause problems so disable all of that when testing.

You may also have created some sort of endless loop. (I really need to know way more information on what you did to know that for sure)

You may also want to consider doing your redirects manually meaning you protect a a page and right after the protection you use regular ASP redirect statements to redirect the user whevever you like based on their session info which is available to easily check immediatly after someone gets through the authentication.

I still stand behind my statements that redirection is not good site design. You really really need to understand and plan your ASP pages as well as have a very good understanding of the session and how all of that works if you use redirection with a password authentication scenario. You should never be redirecting someone to an ".htm" pages except during testing because you wont be able to stop users who are not supposed to go there from going there directly.

Chris-

A general question - Can you have multiple instance of the gallery on the same server? 

far as I can tell it does... that session abandon thing called in the logoff page should be enough to cover everything

once thing to be careful about

If you log in.. then log off... then go back to a page and do a refresh... you  may in fact be reposting the username and password from before.. thus logging yourself right back in

Perhaps not.. all depends on what your doing... but it is something to be careful of when testing 

Is it possible to set the user account time limits when they register? I am using email verification and am trying to have their accout expire 32 days after their initial login.

Also I have an issue with the email notification not notifying me when a new user logs in. It does a beautiful job notifying the new user.  I do not understand why my server will send to one and not the other, I ahve searched the links but none seem to answer this.

Thank you for your help and insight

Both the NET and Classic ASP versions of this application are designed for fine granularity protection of individual apsx extension files. ASPProtect.NET is not designed or intended to protect sub directories, or non aspx content such as Adobe Acrobat .pdf files etc etc.

I completely disagree with your statement that “most sites” have a login box on the left hand side of the page. I suspect you thinking of the ever popular php based forums and “Nuke” type CMS systems which are set up that way but if you look at any site written entirely using .NET that’s rarely if ever the case. (Granted I cant say for sure because I personally haven’t looked at >50% of the estimated 18 billion +  web pages on the internet) Just off the top of my head www.CafePress.com come to mind as a pure .NET site. If you take a look the login button it takes you to its own login page there is not global login form used throughout the site. Reason being that .NET introduced this thing called a “view state” which is used to store things like your session ID (and way more) and must be posted back to the server in order to keep track of visitors. This technology comes in especially handy when you have a web farm in place and your content is being spit out out by more than one server at the same time

I can think of loads of scenarios where the web servers need to know who you are even though you are never directly contacting them via http. This approach is a very smooth and actually very clever solution for enterprise level websites that simply can’t be handled with a single web server.

 On a practical level I know what you are saying but that application sets up all sorts of things when a protected page is accessed and the user is not yet authenticated. That’s the entire reason you need to put that snippet of code at the top of a page you want to protect. That code snippet calls the ASPProtect.NET class and runs through all the logic to see if you are able to access the page. If you are the subroutine exits and the server continues to process the remaining logic on the page. AKA you are able to access its content. If you are NOT authenticated ASPProtect will setup all the proper session and viewstate info and redirect you to the login page for authentication. You may have also noticed a parameter on the login page called ReturnURL. The application looks for that info and if you do have a user ID and password the application automatically redirects you to the page you were trying to access in the first place.

Really I have no idea what you are trying to do, but there is a world of difference in how something looks verses how it works. Lets just say there was a simple way to do what your thinking, what are you going to do with that login form after the person logs in? Just keep displaying it on the entire site so people get confused and don’t know if they are logged in or not? Just that little part of the equation will require making some changes to either ASPProtect.NET or your application will have to have some logic built into it to stop displaying the login forum.

It sounds to me like your basically looking for a super simple 101 type deal that allows people to sign up for an event and you the admin can see that information? I’m guessing they can also log in again and check out their details and see what event they signed up for?

If that’s the case you’re trying to take a very sophisticated protection application and downgrade it into something that would be one heck of a lot easier to write all from scratch in about an hour.

Your not going to be able to “plug and play” a simple form into a page and turn that application as a magic universal login solution for a website, while its 100% possible to use the application that way if you choose, you need to check out the source code and plan your custom integration accordingly.

1st: try it with a normal dsn-less connection like we show in the example.. dont use that OLEDB.4.0 connection string.. connecting like that can cause a lot of problems and is not as great as everyone thinks it is and it can sometimes be difficult to get it working when the database has a password set on it

For the sake of troubleshooting just connect like so: (fixing the path of course)

ConnectionString = "DBQ=C:\Inetpub\wwwroot\aspprotect\data\database\ASPProtect_ access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ASPProtect will generate the actual connection string you should use when you run this page

http://www.mysite.com/data/setup_info.asp

Replacing the part in blue with your website info.


2nd: any IIS server setup to have the access database over the network path like that has a poor setup... and that can cause all sorts of problems as well, access is not designed to run over the network like that.. for more on that read this thread -  Start 5 posts down
http://support.cjwsoft.com/code/code_info.asp?TID=479&KW =OLEDB%2E4%2E0

3rd: If the app does not run using the connection string like I say to use then the problem is 100% on their end and is either related to permissions or the fact they are keeping the access database on a network path which is BAD BAD BAD... no quality host that knew what they are doing would set it up that way.. ultimately you don't want to host asp with a place that has a setup like that

4th: If you want to try some other stuff out we have a free guestbook, asptest, and a free version of aspbanner you can try out as well... www.cjwsoft.com

5th: If you need a quality asp host that knows what they are doing and offers great asp support www.alentus.com is the place

6th: Your right, it is not the code, its the data connection

If you are using version 6 CDOSYS is not supported. That is one reason why version 7 came out. If you want to rewrite the code to work with CDOSYS in version 6 that is something you need to sort out on your own as I do not support custimization to the code.

ConnectionString = "DBQ=C:\TradersReportsCom\aspprotect\data\database\ASPProtec t_access2002.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I have already set the folder permissions as indicated in the documentation.

That was wrong of me but not what I meant. It seems as soon as I purchase something like this it doesn't work right and it can't be altered to work with what I have. The support ends up sucking or being none. Listen I’ve gone thru you're product and it's wonderful and does exactly what you say it does so that's a relief. Sorry about my ignorance with .NET but I’m from an ASP world and it's a lot different. You can see what I’m trying to protect here http://www.hotmixxent.com:8087/default.aspx. The final site after testing will be http://mxais.sfmx.org/default.aspx. Again thanks for the support on Christmas Sunday, that’s defiantly beyond the call and I appreciate it a lot.

Got any info for me on this ?

Chris

Hello Chris:

Yes I'm using the Option Pack.

-Ricardo

I have never heard of such a thing...
If the settings are enabled for the web it should work.
That is, as long as your include file syntax is valid.

I run my own windows 2003 server (you are on it now) so I should know

for troubleshooting

try a very very simple example... like a file in a folder.. with a server side include to a file under it

and see if that works

use real simple asp files with nothing crazy in them... and an include like this

<!--#include file = "../myfile.asp"-->

I pull that crap on myself once and a while... or my favorite is leaving a bootable CD in the drive and then wondering why the heck the OS doesn’t come back up. I pretty much promised myself back in 2002 that I would never mess with anything minor after 10PM. For whatever reason I always start messing around trying to "fix" something and end up sorry... Granted if it’s an emergency I am all for it, but I get dresses in advance anticipating the practically inevitable drive down to the datacenter.

Good luck with that, I am sure you will be much better off in the long run.

When I add a user, I can not activat it.

It sends me back to log on and will now allow me to log in as admin???

I can restart the APP and log in as Admin, but the user I added

is still not activated??

My system will also not allow me to set the Stay Loged in FLag.

It just ignores it....