lets get back to using the forum and not the pm's  please only use the PM's for sensative information. its too hard for me to keep track of all of this as well as help everything else when I got an inbox full of pm's

Ok, so you say no paypal subscription info is being put in the database at all.

I know we have a bunch of people using the paypal subscription code with no issues so I know it works but obviously you got something wrong.

It could be a few things.

Did you enable IPN in the paypal system and put in a postback url like my directions say ?

Are you sure you are not getting paypal single payments and paypal subscriptions mixed up ?

Are the paypal links you made for paypal subscriptions in the correct format like are directions state ? That is critical and another example of something important that you have not shown me.

Did you populate all settings correctly for our paypal subscription code ?
This includes a correct and valid postback url because if that is not right paypal cant communicate with the aspprotect system and no info will get posted back from them at all.

You say your upgrade went well but if you did all all field names perfectly there could be issues with that.

There is just way too much for me to figure out under free support with the info you keep providing me.

I dont think we are going to get anywhere unless I go into your system and spend a considerable amount of time checking everything out. That is not something I do under normal support so if you are interested it is going to involve a fee paid via paypal. It's probably going to take me a while to check everything out and I need you to be 100% sure IPM is enabled in your PayPal account. If you are not sure how to turn it on search their help system as they have plenty of documentation on the process.

Good Evening,

I have been trying to log into my site using the protected pages comments you have in support. I have copied the code in the ASPprotect 7 guide.

<%@ LANGUAGE="VBSCRIPT" %>

<!--#INCLUDE FILE="check_user_inc.asp"-->

and pasted it in my page, set the the IIS to open this page and the page will not open it and the page will not open and the error is

Error Type:
Active Server Pages, ASP 0126 (0x80004005)
The include file 'check_user_inc.asp' was not found.
/olem/reldt/introduction.asp, line 3

When I remove the two lines of code everything goes normally.

I have aspprotect in its own directory in the website. I have read the installation several times and I am afraid I am missing something blatently obvious so I really appreciate you thoughts.

I am presently using redirects. I like not haveing to use them as your comments have suggested. I have pulled all that code from the pages I desire to protect during this test.

I have three test users in my database - 1 administrator

Any suggestions?

Thanks and best regards

Chris, if there is no way to change this, I understand. I just though maybe it might be possible and I can't find out if i don't ask.

Thanks Chris.

Let me know.

-john

Great software.

How easy would it be to copy the email address entered at registration directly into the login id field so that the user's email address is automatically used as the login id? 

Also, where in the code can I turn off the random password generator - I'd rather force people to pick something they can remember themselves.

Thanks,

Nick

in that file "upload_post.asp"

change

<%
If Session("Admin") <> "True"
 Response.End
End If
%>

to

<%
If Session("Admin") <> "True" Then
 Response.End
End If
%>

I am converting the email over from CDONTS to CDO so it will run on my host 2003 server.

What files should I be concerned with?  Under gallery_admin there is an email_user.asp and  under the main gallery folder thier is an email friend. Is there an other email routines I should be concerned with?

Thank You for your Assistance.

Jeromy

I have been working on this all night long. I have been reading every possible article. I have created an ODBC connection on the server.. which i have never done before? Still nothing. I looked at the machine.config file... i read about impersonating whatever the hell that is... I am really stressed out. I have the 1.1 framework installed.

I read about dsn and dsn-less connections. Is there another way i can connect to the database? Without using a username and pw maybe?

Ok, I started the database tables from scratch. I did everything using sql enterprise manager and query analizer..

Same thing happens... certain passwords just do not work.

So I did a lot of testing and I have come to the conclusion that this has something to do with the regional settings of that SQL server.

Here is an example.. see the screenshot below.

Username "admin" password "petepetepete"

The top query done in Enterprise Manager is valid and shows the user.

The bottom query is also valid but it does not show the user.

And that is exactly what is happening from the ASP codes point of view.

Now, this means that even though that encrypted password is getting saved to the databse correctly this particular SQL server just cant deal with it from a QUERY.

It works fine on two different SQL servers that I have. It's just got to be something regional related like unicode characters not being dealt with correctly or something odd like that.

I tried changing the collation data for the "Password" field type on that SQL server and it looks right. I don't know what else to do but it is something about that SQL server. There may be a way to change the regional setting through the connection string but I cant find any articles on that right now.

One solution I have for you to get this working there is to eliminate the encryption factor then I dont think you will have these issues.

It's either that or find another SQL server with US type settings or use MSAccess. ASPProtect runs nearly as fast on Access as long as you do not have over 10,000 users or whatever. The system hardly ever accesses the database so it performance under MSAccess is always good.

Let me know what you want to do. I can shows you how to eliminate the encrypytion factor if you want to try that. I think if I make you a custom version of the RC4 function you can just replace that and then the system will use plain passwords.

Your call..

I understand the encryption for security, but I am using ASPP for a very low security function and don't want encryption.

Can't I simply delete the code that does encryption?

If not, how can I

take my ASPProtect_access2002.mdb that was opened on my local host, with my own users added with text passwords,

export to a delimited text file, import it into ASPP with my own passwords encrypted, the use that file instead of my old .mdb file? Thanks

I am having problems accessing the admin site at the following URL:

http://www.drsweisberg.com/password_admin/default.asp

It brings up the login page, but when I enter the admin/test, it times out.  The DB is the copy with no password and it resides in a directory on the same server hosting the site but it is not in a folder viewable by web users.  This is how the dataconn_inc.asp is set:

<%
'*** Below are the only two settings you need to edit in this file
 
ConnectionString = "DSN=drweisberg;Driver={Microsoft Access Driver (*.mdb)}"
DatabaseType = "MSACCESS"
%>

The ODBC is setup and the IUSR has read/write/modify permissions.

Any help would be greatly appreciated.

Look in the "check_user_inc.asp" file..

You'll see the name of the cookie there and also get an idea how to access it.

In most versions it looks like this.

Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")

You'll want the cookie for the username because the session variable will not exist unless they have actually gone to a protected page during that session at the site.

It would probably be best the check for both the session and the cookie. That will make sure people logged in that arent using the cookie option still see the message you want to display.

Sorta like this..

GetUsername = ""
If Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "" Then
GetUsername = Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")
Else If Session("Username") <> "" Then
GetUsername = Session("Username")
End If

Response.Write GetUsername

My Admin user got corupted, and I need to reset the password and user, what is the defualt password for this database, as I do not think I have changes this (hopefully) as of yet.

Regards,

Paul

Aspprotect issue

I need the ability to allow users to view url links on a page, based on the

group(s) they are a member of.  If the user is the member of one group (group 1 in the following example) the code works fine.

<% If Session("GROUPS") = "*1*" then %>  "view link #1"

However, if the user is a member of more than one group (let's say 1 & 5), I cannot make the code work.  

I have tried various versions of wildcards, nothing seems to get me there.

I fairly new at ASP, and I am sure I'm missing something simple.

Any help would be appreciated.

sorry your having so much trouble. A good host is a must.

Yes, that is most likely permissions related.
http://support.cjwsoft.com/code/moreinfo27-1.htm

You may want to read over my article on how permissions are set. It will give you a very good understanding of the process and may help yo when dealing with your hosting company.

http://www.powerasp.com/content/new/windows_2003_server_and_ permissions.asp

there is also an xp pro version of the article for people doing locl development and running iis on their xp box
http://www.powerasp.com/content/new/windows_xp_pro_and_permi ssions.asp

Thanks for the info.  We'll do as you suggest.

NPA

First pass through, I don't see anything changed in the groups section of the check_user asp file. the logoff asp wasn't touched.

I noticed the demo online (on this site) only has pages protected with access levels; you say it works fine with groups also?

Is there a way to set various members to upload a limit of photos. So, one member can only upload 5 photos in 1 album and another can upload 30 photos in 2 albums. Even if you just set a permission for the number of uploads for each member.

Thank you

Your actually confusing me with the whole "joe bloe" thing and user access. I just do not get what you are trying to tell me. Perhaps you can explain in a less confusing way. Your just not technically explaining it andand thats what I need to know to possibly help.

As for the subweb thing you just can not do that. Subwebs have their own sets of application and session variables. An ASPProtect installation and any pages you protect with it are required to be in the same "application" in IIS. Sicne subwebs have their own "applications" in IIS that won't work. It is the nature of "forms based authentication" A sub web is alo considered by our licensing to be a seperate web site and ASPProtect is licensed per web site.

As for breaking pages.. you really shouldnt be editing any pages in the admin area as you will break them unles you are very good with ASP. (does not sound like you are..no offense meant at all)

Pages in the "users" folder are less complex and it is usually ok to edit them carefully.
http://www.powerasp.com/content/hintstips/common_sense.asp

Pages of your own that you password protect can still be edited in your usualy way though without effecting anything.

Truth is if you back things up before you start editing how can you go wrong ? That's how you learn.

I'am in the process of modifing registration and tieing in paypal. When I get live I will send you a link. Thanks for help.

John

Here are three known bugs and their fixes...

If you have any of these symptoms these fixes will most likely take care of them.
If you don't have a symptom do not make any changes as you most likely have an updated copy of the application.

Technically if you bought that app on or after April 27th 2004 these bugs should all have been corrected.

Description Fix

(no descriptions showing in pop up window)

Edit pic_window.asp with a text editor

Change

Set f=fs.OpenTextFile(Server.MapPath("pictures/Album_ID_" & Album_ID & ".txt"), 1)

To

Set f=fs.OpenTextFile(Server.MapPath("../pictures/Album_ID_" & Album_ID & ".txt"), 1)

Slideshow Fix…

(last image in slideshow it not showing)

In slideshow.asp

Change

<% For PicArrayIndex = 0 To Ubound(PicArray) - 1 %>

To

<% For PicArrayIndex = 0 To Ubound(PicArray) %>

Add To Favorites fix

(add to favorites feature doesn’t work at all)

Edit "album_uppermenu_inc.asp" in the scripts folder

Change

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

To

<a href="users/favorite_albums.asp?Album_ID=<% =Album_ID %>&Action=Add_To_Favorites"><img border="0" src="<% =application("skinpath") %>add_to_favorites.gif"></a>

Sorry Chris,

It didn't fix it.  Looks like I had the current code.  I bought the system in mid-April.  The version says 3-10-2005.

I do know that in the database, the password shows as " éG"  but in the error code, it shows as " éG".  The square character is missing. 

Thanks,
Mick

Edit: well heck.  It skips the square box here too.  The password in the database puts a square box in front of the éG

Understood.... can you point me to a place where there are other methods of calling banners?  Do you mean not use Flash?  I am new to this and will need some pushing over the cliff!

Thanks

Dave

I'm all set - after thinking about your replies - i checked a bit more and changed the email component type -- thanks again for all your help.

OK, I just spent like an hour in your site.. I almost gave up

1st off... I don't know what FTP Program/Settings or what OS you are using but all the ASP Protect Files had been reformatted in a odd way which was causing some issues and the database also had problems. Your somehow introducing all sorts of UNIX line breaks to all the files and the database was actually missing some crucial parts of itself and was corrupted. So I had to update everything which means a new database. I have never seen anything like it but I fixed it all. Its something you are doing but I do not know what. Maybe your unzipping method again ?


So to get back into the admin area...

admin
test

Now, the reason  the albums were not showing is because you are using the ole connection string which causes problems like that. However because you host has like the worst setup ever with that network path crap for the site that was the only connection string that would work for some reason.

I highly suggest a new host with a proper setup for running ASP. www.alentus.com
Your hosting companies setup is horrid as far as I am concerned.
Access Databases are not meant to be connected to via a network path.
http://www.aspfaq.com/show.asp?id=2168

Anyway, I rewrote some of the code because of the ole connection and got the albums showing up for you.. who knows what other problems that OLE connection may bring up in the future.. for now things I tested seem ok.

As for your broken image in the your header/footer...  You cant link to images and links using virtual pathing in those includes because the files are called from different directories and will work in some and not others

so when your in the root you see the image, when in a different folder you see a broken image

In other words.

link to

http://www.vickerylightning.com/gallery/vickery_template5_r2 _c1.jpg

not just

vickery_template5_r2_c1.jpg

The same goes for hyperlinks.. use the full url paths


Whatever you do...Back up the gallery folder with my changes before you go doing anything.

thanks for posting this... Since "private" is the default setting from what I read and setting it to "public" cured the issue chances are leaving it at "public" is the way to go.

http://msdn.microsoft.com/library/default.asp?url=/library/e n-us/iissdk/html/33f2780a-eee8-4601-84b7-b489e4c756df.asp

http://www.w3schools.com/asp/prop_cachecontrol.asp

ALSO: since you are one the few people that has ever contributed anything helpful to the forums I am going to reward you with a free copy of the password expiration mod. I am sending you a PM with the download info.

The code is ok..

Your getting an error because no banners are showing up in that zones rotation.

run this directly in the browser and you will see that there are no banners being generated for that zone ID
http://www.poconocommuter.com/aspbanner/aspbanner_inc.asp?Ba nnerZone=6

As a matter of fact I dont see any banners showing up for any zones previous to 6 which tells me either you dont have valid banners in there or the application variable info got corrupted do to a server crash / power off or something.

http://support.cjwsoft.com/code/moreinfo95-1.htm

pretty clever...

If anyone is interested in what the Mod function actually does this article explains it nicely. They even use it for the same purpose in the examples.

http://www.asp101.com/articles/steven/mod/default.asp

And I'm the one who finds those rarities!   I'm not surprised. 

Oh well...this should be interesting trying to get an 80 year old man to change his password.

Thanks for your quick responses Chris.  This is still an awesome membership system!

Mick