I checked the option pack code as well and it looks correct.
I tested it and it acted as it should.

You can see it in active at the live demo
http://www.aspprotect.com/demo3/demo.asp

admin
test

go the the admin area.. you will notice 3 users with level 4 access
1 of them is inactive

then go to the mass email area and pick   active and level 4
it will say it is sending email to 2 users which is correct

then go to mass email again and pick level 4 and inactive
it will say it is sending email to 1 user which is correct

choose any status and access level 4 and it will send email to 3 users which is correct

When you do this please realize you can not choose a group as well.
That will cause a problem because you can not choose a group and an access level at the same time.


Anyway... perhaps you can private message or use the contact us form and and let me take a look at your system. Since I can't reproduce the behavior that is the only way we might figure this out.

Regarding installation in a subfolder

Though this should be common sense and ASP.NET 101 "so to speak" One thing not mentioned in the docs..


If you do not install ASPProtect.NET in the true root of a web there a key in the web config you must adjust.

it looks like this

<forms name=".aspprotect~net" loginUrl="/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

The way it comes it is valid for a root installation..

lets say you installed the application in folder called.
"aspprotectnet"

the key would change to this

<forms name=".aspprotect~net" loginUrl="/aspprotectnet/aspprotectlogin.aspx" protection="All" timeout="60" path="/" />

I've got an ecommerce module that's running on it that uses access for the db.  Connecting into that thing is slow as well, but I figured that's because of the complications and volume it handles.

So as far as importing on a faster machine and copying it over to the server...what suggestions do you have?

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

the following error message appears, but only when attempting to log off. all other parts of the program seem to be working.

[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0xa04 Thread 0xa38 DBC 0x21ff024 Jet'.

ASPProtect v7 comes with working example code of protecting an image from being downloaded and also protects the true file location of the image on your server..

This comes with the system as an example folder with some files in it.

Basically we protect the image in 2 ways.

All in all this is should be very effective protection. Yes, there are still ways to get the images like doing screen captures, but this will ensure that people viewing images are logged in to your site. This will in most cases keep them from right clicking and saving the images. This will ensure that people can not tell other people the image's url location and it will ensure other sites can not leach your images and bandwidth.

For the image protection examples to work you may need to edit some values
in the stream_pic.asp file that are valid for your setup.

Look at the source. The values you can edit are commented.

Now, you also need to call a valid "image file name" from the call_pic.asp file which is an example of how you protect a page with javascript and call a streamed image using an image tag.

Lasty, here is a great article I found on image protection and some of the things you can do about it and some of things you cannot.

http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID =41

New Features added to 7.x

1. Entire application gone through and updated.
2. New graphics, new look and feel
3. Passwords and Cookies are now encrypted using separate keys individual to each customer install.
4. Groups Feature... powerful way to protect pages based on group access
5. Ability to upload a picture for each user.
6. New printable profile user screen.
7. Supports 13 email components as well as outgoing authentication for a few of the email components
8. New Lockout option. "However many" try’s to login and you are locked out for a certain amount of time.
9. PayPal signup routines for both single payments and subscriptions integrated into the application. Everything is handled automatically. Charging for membership couldn't be easier. 
10. New Newsletter Feature allows you to send newsletters to those subscribed. 
11. New ability to Email users soon to expire
12. HTML emailing for people using CDOSYS. This includes an inline html editor so you can send out some really professional looking emails.
13. Ability to redirect a user anywhere on 1st login
14. Option to turn off Login Remember Me Feature
15. Login Form now very easy to edit
16. All paths for places that need permissions can be easily changed.
17. Works with Parent Paths Disabled on the web server.
18. Company Name is now an optional field
19. Handy javascript popup date selectors
20. All date functions now internationl date friendly
21. Password conversion routine to upgrade existing users to the password encryption
22. Import / Export of user database built in
23. Protection Code Generators
24. Notes Feature. Javascript Popup on users screen that allows you to quickly see information without going to their edit screen
25. Mass email users incuding ability to send them usernames and passwords all at one time.
26. Option to not allow concurrent logins by the same username
27. Optional feature to keep track of recent users that have logged in as well as allow you to view the information.
28. Optional feature to keep track of recent users that have logged in, what pages they accessed, and when, as well as allow you to view the information.
29. Ability to protect other files types other than just protecting the viewing of the ".asp" pages. We provide working example code showing you how to protect images and file downloads in your protected ".asp" pages. You can protect nearly any type of file from downloading and viewing. (gif, bmp, jpg, zip, exe, pdf, rar, mp3,etc..)

Sorry about earlier post in wrong area-

I have followed instructions to set up access levels (adding the

<% CHECKFOR = "4" %>    for user level 4 for instance.) The database is connecting properly and the basic check for login is taking place, but it seems that all users have access to all levels no matter what is on the database; i.e I set up a test page with "checkfor=4" and all users have access to it, even those with lower leve access.

Any ideas?

Thanks

IT worked just as cwilliams said. I did see the IP address being stored in the table but it didn't dawn on me that it was tied in to the view count, I tried it from a different IP address and it worked great .

Good coding Christopher

Thanks

John

here is a thread that may help you if this is what you were getting at

http://support.cjwsoft.com/code/moreinfo389-1.htm

Three questions here:

1. I am having a problem with characters being displayed properly when viewing listings. Some alphabet characters and punctuation characters do not display properly when viewing the pages.

Sample here:

http://www.hibari2.com/lanoitanretni/kokusai_profiles/view_i tem.asp?Ad_ID=102&CatLevel=2&Cat1_ID=3&Cat2_ID=& amp; amp; amp; amp;Cat3_ID=&Cat4_ID=&FromSearch=True&SearchPage =%2Flanoitanretni%2Fkokusai%5Fprofiles%2Fdefault%2Easp%3FCat Level%3D2%26Cat1%5FID%3D3

In the access database I was looking at the properties for the ‘Ad_Custom’ fields. Unicode Compression is 'Yes' but IME Mode is set to 'No Control'. I wonder by changing this to ‘Hiragana’ if will solve the issue.

Note: the essays are typed in English on computer with Japanese OS, and then pasted up. Even though they are typed in English, there are several setting that may affect the output.

2. I want to reverse sort order for listings instead of listing 4, 5, 6, 7, I’d like to sort 7, 6, 5, 4… Could you tell me which page has to be edited, and in simplest terms what has to be changed?

3. Also, I’d like to increase the default display of ‘items per page’ from 25 to 100. Could you tell me which page has to be edited, and in simplest terms what has to be changed?

Thanks

If they changed the paths they moved the site.

That means permissions for the database folder must be set again.

If permissions are not set and you are not using the correct new path info then you will still get errors.

Those errors the server reports back and quite generic and do no mean exactly what they say. They just mean everything is not perfect.

And everything just has to be perfect..

(Indemnification Agreement Mod)

This very simple mod will add an Indemnification Agreement Pop-up to the registration signup form which must be agreed to before continuing. This is often done for legal reasons to help cover yourself if something should come up later on.



Instructions:

Download 2006-03-19_212700_Indemnification_Agreement_Mod.zip which contains "terms.js" and put it in your scripts folder. It contains the text that will be displayed in the pop-up. You can of course carefully edit it with a text editor to say whatever you like.

Now carefully edit "users/register.asp" with a text editor. Add this bit of code in blue right after the include to the "footer_inc.asp" file like so. It will be near the bottom of the page.


<!--#INCLUDE FILE="footer_inc.asp"-->

<% If ErrorMessage = "" Then %>
<script language="JavaScript" src="../scripts/terms.js">
</script>
<% End If %>

Your done, that's it. Now when "users/register.asp" is run for the 1st time the pop-up will come up.

I dont know about the unspecified errors. I really need more detailed information. (Since it has been working fine for quite a long time you might want to consider installaing the application from scracth again and see if you still get errors)

As for the log in not persiting. Did you by chance turn off cookies in your browser ? They are required for forms based authentication to function. Otherwise, yes you would need to log in to each and every page as you moved around.

Sounds cool.. post info when you get it sorted out

thx

hopefully someday I'll get the new version finished.. I just never seem to have time. Lately ASPProtect takes up all my time and now aspclassifieds seems to be in need of a new version more so than asp photo gallery

Anyone have any experience configuring PhotoGallery to use a backend mySQL database?

The application connects successfully for Read operations, but no amount of troubleshooting can get it to Write records to the tables.

http://www.marc-lisa.com/photos/default.asp

can add photo album but after i upload a pic, nothing shows.

where do i look to research why pics aren't showing in the albums

Can ASPClassifieds display the ads by city?

I have a web directory that lists websites and companies by city.  Is it possible to have specific ads shown to the user depending on what city they click on?  For example, only ads in New York would be shown to users that have already clicked on that city in my directory.

thanks,

I have a user who is trying to login. However, I am getting a error that I can't seem to find.
Username: executive.barcheski
Password: executive@amcpc.com

Encrypted Password: Ū?=¨`Ł…Ü

Error on check_user_inc.asp line 114

If (Request.Cookies("PASSWORDSYSTEMCOOKIE")("KEEPMESIGNEDIN") = "True") And (Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "") And KeepSignedInOption And Status <> "Checkem" Then
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COOKIE_USERNAME "), CookieEncryptionKey) & "') And (Password = '" & Replace(RC4(RC4(Request.Cookies("PASSWORDSYSTEMCOOKIE")("COO KIE_PASSWORD"), CookieEncryptionKey), PasswordEncryptionKey),"'","''") & "')"
Else
CheckUserSQL = "SELECT " & tbl_label_users & ".* FROM " & tbl_label_users & " WHERE (Username = '" & Username & "') AND (Password = '" & Replace(RC4(Password, PasswordEncryptionKey),"'","''") & "')"
End If

CmdCheckUser.Open CheckUserSQL, ConnPasswords

error received: unclosed quote after 'Ū?=¨

Any ideas

Jason Johnson

I know what is happening.. its the old single quote thing messing up the query string..
but it shouldnt be happening with the newer code as I fixed it.

If you like I can go in and reproduce/fix the issue. I can not think of any other way I can help you as other users have not reported the issue.

Chances are if it is happening in one situation it will happen again in the future.. it really all depends on the passwords being used and your encyrption key... other passwords may produce the issue even if the password is correct

basically once the password gets encrypted it by chance has a single quote in it... then it messes up the query

I take care of the situation by replacing the single quote with a double quote but it looks like you found a situation where that didn't work out

For some odd reason, the the export path has two backslashes (\\) at the end, thus generating an error each time I try to export. For example

C:\path\website\protect\data\export\\

This appears toward the bottom of the import_export_manager.asp page and is called by =ExportDirectory.

I checked under settings tab, no path ends with a "\". Any idea where else I need to look?

Nick

I really do not know.. maybe it is a conflict with something else..

I run many instances of aspbanner on my servers and I have every item to log enabled for my iis log files... my stats server software which reads those log files (livestats and smarterstats) have never reported any 404 errors related to (aspbanner/those images)...

I do not know what is happening in your situation..

sorry.

Thanks, I really appreciate you working on this. The software works GREAT and the support you give can't be beat. I will definately tell other that are looking for software for their sites to check your first.

one more question.

To use the bulk upload feature of aspuload, do I just need to add another upload section to the same upload page, that will allow more than one file to be selected then tell it to put the files in as Photo 1, 2, 3 etc.? I am a rookie at ASP but I think this is possible and with a little research I should be able to get it going.

Just want to make sure I am on the right track.

Thanks

Here is what I have in settings.

ServerSoftware	Microsoft-IIS/6.0
ServerName	www.107threnegades.com
ServerProtocol	HTTP/1.1
PathInfo	/gallery/gallery_admin
PathTranslated	d:\hosting\arisky1\gallery\gallery_admin
FILE SYSTEM OBJECT	Installed
ADODB (ActiveX Data Object)	Version: 1.2 Installed
CDONTS	Version: 2.80 Installed
SMTPMail	Not Installed
JMail	Not Installed
AspEmail	Not Installed
AspMail	Not Installed
SAFILEUP	Not Installed
Dundas Upload	Not Installed
ASPImage	Not Installed
AspJpeg	Version: 1.4.0.1 Installed
ImgWriter	Not Installed
Script Engine
Type	VBScript
Version	5.6
Build	8515

I do not even see ASPUpload listed but when I run the test_asp_components.asp from the extras/more_component_info folder, it shows that it is installed.

67	Upload	Installed	COM Details	Persits - ASPUpload
68	Image	Installed	COM Details	Persits - AspJpeg

I am also getting the "Unspecified Error" message.  I just transferred my site to IIS 5.0 and I get that error now.  However it does not happen everytime.  I can click on a page and it opens fine and then I hit refresh in the browser and I get the "Unspecified Error" message.  What could be causing this?

Okay Chris, I wold like to get rid of the encryption then if it's not too much trouble.

I have no option of running the production server against an ms access db, since the db needs to be online and accessible from another system.

import/export feature WARNING !!

I just want to warn everyone that the built in import/export feature can be a little dangerous.
The reason being is when you import users they get new "Users_ID"s in the database.

The "User_ID" field is an autonumber field and that is why and there is nothing you can do about it.

So, if you are using a user's current "User_ID" to keep track up something important NEVER export the users and re-import them. Because their "User_ID" will change and you will be in trouble.

The PayPal signup features of ASPProtect actually use the "User_ID" like this and that is the main reason this warning is here.

now, that being said

If you are importing new users into ASPProtect

or

simply exporting existing users to another system

then this is nothing to worry about.


Basically, the moral of this story is dont think of the built in Import/Export feature as backup system because it is not. It is not a substistute for backing up your database.

It is a just a tool that can come in handy for various things.

you password protect an asp page in your site "where that is is up to you"

http://support.cjwsoft.com/code/moreinfo171-1.htm

then you link them there from your own pages

thats all there is to it

is that what you are asking?

Additionally...any page you password protect automatically becomes a login page... where you want to start and where you send them after or before login is something you have to handle on your own

Any pages you pasword protect will prompt the user for login info if they are not yet logged in that is.

Then once logged in it returns them to the same page they are showing the page content as it would normally appear.

Weird things happening, when I upload using the vb method the image fails and error is that the image was empty.

Utilizing ASPUpload and after clicking upload file I get a blank screen, no preview, no nothing (it loads with the proper header/footer) but a completely blank body.

Any hints?

here is the answer
http://www.iisanswers.com/IIS51.htm

CDONTS

CDONTS (Colloaborative Data Objects for NT Server) is a feature of NT and W2K that allows you to easily send mail from a web page using the SMTP server. The simplicity of the code and widespread availability of free scripts employing CDONTS has resulted in  CDONTS being widely adopted.

Quite a surprise to many administrators to discover that IIS 5.1 does not support CDONTS as do IIS 4.0 and IIS 5.0. This has been replaced by CDOSYS which appears to have more capability, but it is not quite as simple to use. See: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q195 683 for more details.

You can enable CDONTS on XP by copying CDONTS.DLL from a Windows 2000 installation to your XP system’s Windows\System32 folder (default name). Then at command prompt Windows\System32 run REGSRV32 CDONTS.DLL. The extent of my testing on this was to deliver one piece of mail, so this should not be construed as a complete analysis of the effectiveness of this technique.

noted.

1.) this has been explored and because of the way groups works is not feasable. Because us this I wrote code to allow you to view and sort all users for any group on the actual groups page. You pick a groups and then click the "Show Users" button

2.) noted