Is there an easy way to make this work with reoccurring a monthly or yearly subscription?

Additional Information.

A set of these variables get created for every user that logs in to your site.
For performance and memory conservation reasons some of them can be turned off and are optional.

If you look in the "check_user_inc.asp" file or the "check_admin_inc.asp" file you will see a section of code like this


   ' Start of optional session variables to be set
   ' Recommended that you remark out any of the session variables below that you don't really need to use
   ' This will save a lot of server resource because every user logged in has a set of these
   
   ' I added some code here to not create these if they are empty
   If CmdCheckUser("First_Name") <> "" Then Session("First_Name") = CmdCheckUser("First_Name")
   If CmdCheckUser("Last_Name") <> "" Then Session("Last_Name") = CmdCheckUser("Last_Name")
   If CmdCheckUser("Company_Name") <> "" Then Session("Company_Name") = CmdCheckUser("Company_Name")
   If CmdCheckUser("Email") <> "" Then Session("Email") = CmdCheckUser("Email")
   If CmdCheckUser("Address") <> "" Then Session("Address") = CmdCheckUser("Address")
   If CmdCheckUser("City") <> "" Then Session("City") = CmdCheckUser("City")
   If CmdCheckUser("State_Province") <> "" Then Session("State_Province") = CmdCheckUser("State_Province")
   If CmdCheckUser("Zipcode_Postal_Code") <> "" Then Session("Zipcode_Postal_Code") = CmdCheckUser("Zipcode_Postal_Code")
   If CmdCheckUser("Phone") <> "" Then Session("Phone") = CmdCheckUser("Phone")
   If CmdCheckUser("Custom1") <> "" Then Session("Custom1") = CmdCheckUser("Custom1")
   If CmdCheckUser("Custom2") <> "" Then Session("Custom2") = CmdCheckUser("Custom2")
   If CmdCheckUser("Custom3") <> "" Then Session("Custom3") = CmdCheckUser("Custom3")
   If CmdCheckUser("Custom4") <> "" Then Session("Custom4") = CmdCheckUser("Custom4")
   If CmdCheckUser("Custom5") <> "" Then Session("Custom5") = CmdCheckUser("Custom5")
   If CmdCheckUser("Custom6") <> "" Then Session("Custom6") = CmdCheckUser("Custom6")
   
   ' End of optional session variables to be set

If you do not need a particular variable to be set as a session variable simply comment that line out with single quote.

If you have an extremely busy site with a lot of users this is a good idea. If not, you probably don't need to bother doing this. I added some code in there so they will not be created if they are empty and that alone helps out a lot.

ok.. so we got an NT server with a 486 with 256 meg of ram. 

hehe  sorry

anyway.. I have the system running without doing any importing and WOW is it chugging.. I mean it takes a while even to edit/save a user

good news is the filesystem object works as I wrote to a text file

this may end up being a simple case of lack of horsepower..

we may need to do the importing on a faster system and then take the database over cause everthing I see on your server looks correct

even so aspprotect is running so slow.. I have never seen it chug like this

I even tried connecting to a 2000 version of the database and no difference.

I am not totally sure what is going on but the server resources available are scaring me... however this could be something new in the code that I never got a chance to try on NT server.. I dont think so though

how does your other stuff run ?

static pages that do not access a database seem to serve up quickly.

are you running any other dynamic code ?

Not sure because of the nature of the javascript method

for starters tighten up the html around the banner call

change

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<!------- ASPBanner Ad code ------------->
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >

</td>

to

<tr>
<td width="460" height="60" align="center" valign="middle" class="imagead">
<script language="JavaScript">
var code = '';
var now = new Date();
var nIndex = now.getTime();
document.write('<s' + 'cript src=" http://www.nababaseball.com/aspbannernet/aspbanner/injectban ner.aspx?BannerZone=1&nocache=' + nIndex + '">');
document.write('</' + 's' + 'cript>');
</script>
<script language="JavaScript">document.write(jscode);</script >
</td>

If that doesn't help I would suggest using the ASP 3.0 version of ASPBanner. It can serve banners to a any type of page extension and it runs just as well as the .NET version. There is a new iframe method for calling banners that you can try instead of the javascript. The iframe method is explained in the ASPBanner Unlimited section of the forum.

[QUOTE=cwilliams]I would like to delete the SQL tables and set them up from scratch using enterprise manager and sql query manager and see what happens

If that is ok with you let me know.

Something is wrong like I said...  almost seems like the database is caching old password info from the field.[/QUOTE]

Sure go ahead

Is there a way to protect other virtual sites on the server that are not under the default web site considering people may have different websites running off one server?  I get the following error:

Parser Error Message: Cannot use a leading .. to exit above the top directory.

Source Error:

Line 1: <%@ Register TagPrefix="aspprotect" TagName="checkaccess" Src="../../protectpage.ascx" %> Line 2: <aspprotect:checkaccess level="4" groups="null" runat="server"></aspprotect:checkaccess> Line 3:

Thanks!

I used Dreamweaver4 to make my site is there anything I can do to make it work?

yes. what you are talking about has to do with norton ad blocking software.. it blocks images or paths that have the word "ad" in them.. and you see red x's where images should be on web sites.. usually

it is different then what this thread initially mentions which has to do with a code/server issue with the application variables.

I have a very weird problem.  At the top of the page, where there used to be

[Place Ad] [Classifieds Home] [Register] [Sign In]

now there is only

[] [Classifieds Home] [Register] [Sign In]

so the words "Place Ad" have disappeared completely.  Can you please tell me which file in which folder would control this

  Hi, we purched ASP Protect a few months back and had it installed on our hosting company under a "temporary" domain name -- cidrasensors.com

We are now about ready to switch this development site over to production and I need to change the domain from cidrasensors.com to cidra.com

My hosting company wants us to create a new accounting and re-set everyting up.

So...based on this, I have a few questions for you:

1. Do I need to re-install the software? or can I copy from one account to the other?

2. Assuming I can copy the software to the new account - are there changes that will need to be made to point to the new domain?

3. If I decide I wanted to keep the first account alive for development purposes (never turn on the website domain to the public) - would I need to have a seperate ASP Protect license? 

4. If I decided to ask you to do the transfer for us - is that covered in the $20 Installation fee I saw on the web?  

The problem was in config_inc.asp. we had renamed the field in the DB but didn't change it in this file.

But we changed it, it is back to normal.

Thanks

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

New question...

When someone edits their personal information, such as address, is there any way to set it so that someone in the office can receive an e-mail noting the changes?

Thanks.

Excellent

Nov 2005

Good Morning - I am receiving an Http 500 internal server error when I go to add a new user via the register.asp page.   the url when the error appears is: .../users/add_new_account.asp

I think the error has to do with my email component setting - becuase it works fine otherwise.

I have the email component setting set to CDOSYS (using remote server) with the mail.remote.server set to email.cidra.com - email address set to webmaster@cidra.com

Note: I receive the email notification and the user does get added.

Can you help please? Shirley

UPDATE...I just figured out that it only errors when the email address I use for the user is NOT from cidra.com -- Any idea why?

Thanks for the quick reply!

I was thinking it was an ASP config/install issue.

I usually deal with Linux/PHP, so this is all new to me :)

Chris, that fixed it.  Found 2-references to guestbook2 in the file show_messages_inc.asp located in the \guestbook\ directory.

Suggestion for future release.  Create an option to email the admin when a message is posted.  If this code already exists please advise.

Thanks, Lance

http://gibsoncity.info/guestbook/default.asp

Reports 65-messages, however after the first 10 are displayed and you click on the More Messages button, I get the Page cannot be found error.

just leave the databse where it is, use the connection string generated for you and most importantly... put in a request with alentus for permissions to be set

tell them "D:\Websites\www.mysite.com\aspprotect\data" and all of its child folders need change permissions (r,w,x,d) set so aspprotect can do its thing

until the permissions are set that connection string can not work

this is all noted in the installation docs...

Is this the full version 7.
Did you make any changes to the code ?
Is the User_ID field still an autonumber field in the Access database ?

I do not see how this could happen unless somehow the autonumber field setting for User_ID was changed in the database?

One last thing..

This is bad

http://www.bones.myftpsite.net/rfamilystuff/pictures/

there are .asp files in there people can run that you dont want people running..

u should delete the asp files in there or turn off directory listing...

take care,

CJW

It almost seems like allow images is denied.  When I look at the ad it doesn't even show a place where the thumbnail or image would go:

Columns now are Ad Name/ Price / Expires / Hits

There used to be one before Ad Name.

Even unchecked (saved) and checked

Use_Picture_Upload

< = value=True name=Use_Picture_Upload> Check this if you will be using the picture uploading feature.

Hi. Chris.  I'm not a programmer of any sorts, so I am not comfortable plugging in the changes you suggested and not knowing for sure if it will "break something somewhere else".  If the programmer tells me "you have been warned", its a pretty good sign its a no win situation. If you don't know, theres no way i can know.

I saw in the code where you mentioned the changes. I don't see where it mentions the last name is required either, but the bottom line is it does require it it the actual new user form.

Thanks anyway Chris. I'll figure something out.

-john

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

I appreciate the offer to beta test... but its really more a matter of me getting it ready..

I have a lot done.. but a lot of things are hard coded to only work on my machine and some things have not been sorted out. Giving it to someone else to test would be a waste of time at this point as I they probably couldn’t even run it.

Lately the reason this project has fallen behind has all to do with my main webserver where I collocate.

1st it got compromised (we think by certain competitors who are always up to no good)... then windows 2003 server which I decided to go with on the new server gave me random problems... then the Cisco hardware firewall was acting up and making the sites run slow....then SQL server attacks on port 1433 from Korea when I took the firewall down....and as of the last few days I think the server just needs a new power supply. I swear for the last 2 months I have spent more time administrating my servers than working on code. Yesterday it was locking up every 30 minutes. There have been a lot of days like that and it takes up all my time until I get it situated.  Especially since its over 100 miles to the collocation center. The APC unit I installed that allows me to remotely cut the power to hard reboot is a life saver.

Fun... I tell ya... and expensive.. (hardware, software, lost sales, and time) I am pretty much completely broke at the moment. It has been a very expensive few months.

But I like running my own servers... I run dns servers, email servers, sql servers, web servers.. I do it all. It's keeps me in touch with the latest software/hardware. Regardless , my servers ran well for years and they will again.


anyway.. hopefully I can actually get a new version of the photo gallery out before the month is over. It will probably be the last classic asp version. The version after that will most likely be ASP.net.

[QUOTE=cwilliams]actually, passwords can be up to 75 characters long in ASPProtect.
the only requirement when entered from a non admin user is that they are at least 4 characters long.

what does MSAccess have to do with this ? Are you trying to convert and old system or something? I noticed you created and "old password" field in there ? Is there something I do not know about as far as what you are trying to do?

Passwords in version 7 are encrypted so I hope you understand all of that and realize you can not enter or change passwords right from SQL server. Also if you import info you must handle that accordingly and convert the passwords to encrypted format. [/QUOTE]

First off, I haven't imported anything from MS Access.. The only reason I mentioned it is cuz I thought initially it worked with Access and not SQL server.

I am not converting nor entering any data manually into the db, nor have I changed anything in the way the registration is made (don't know where the "Old password" has come from? thought it was a function you made?)

Adding Support For ServerObjects ASPMail

ASPProtect as you know does not support ServerObjects ASPMail component by default.

Here are directions to make it work.

In the ASPProtect admin settings area simply pretend as if you are using the softartisans sasmtp mailer component. ASPMail and that sasmtp component share the same properties… and the code used for them is nearly identical.

So search through the code for any place where email is sent and simply change

Set Mailer = Server.CreateObject("SoftArtisans.SMTPMail")

To

Set Mailer = Server.CreateObject("SMTPsvg.Mailer")

It is about 4 places. They are not too hard to find.

That’s the easy way to get all the emailing functions working with ASPMail

Javascript Popup/Pop Under Generator

Until I have time to make one I suggest using the one on the banmanpro support site as it is pretty nice.

Just dont use option 2 on that page as that is specific to banmanpro

http://www.banmanpro.com/support/popupgenerator.asp

Sorry, I forgot about that when I got hung up on the install problem.

 I'll tackle your explanation now to see if I can get it working. Since I already bought the software I'll keep my fingers crossed.

Thanks

recent activity infomation is temporary and mantains itself per application start up.. when the web application restarts for whatever reason the info is reset

a reboot, an iisreset on the server, application pool restarts, etc etc
this is done because if that info was saved in the database your database would get huge real quick

logfiles however do not do that and are permanent

no, that system only works with ASP.NET code.

Currently it can not possibly work with classic asp.
PayPal made it a nightmare to use and work with.

Special things regarding the signing of digital certificates also need to be installed on the web server so if it isn't your server your also out of luck.