if it is your own XP machine there is no reason you should edit that config file manually.

simply set permissions on the data folder and all the folders in it and the application will write to the config files on its own... if you are having problems chances are you are not setting permissions correctly.. please read all of this
http://support.cjwsoft.com/code/moreinfo56-1.htm

if is not an XP machine (your post was confusing and I am not sure) then this is an article for 2003 server
http://support.cjwsoft.com/code/moreinfo136-1.htm

Most importantly whats the real error ? error 500 does not help figure out anything
http://support.cjwsoft.com/code/moreinfo11-1.htm

lastly make sure you go into iis and make that web its own application

Not a problem.  Have a good time at your wedding.

thanks!

I'm having an issue importing. It moves the images from the /import folder and creates the thumbnails with no problem, but the full-size photos all have a size of 0 bytes.

http://www.larrysampas.com/gallery2/default.asp?CatLevel=2&a mp;Cat1_ID=1

UPDATE:  read whole thread..
Version has been delayed




These are my personal notes on the new version of ASP Photo Gallery that should be out sometime in May/June 2004. Please ingore any typos.

This version may be more expensive than the current pro version as this is a major re-write and there will be a ton of new features.

Regardless, special pricing will be offerered to existing users.

If you see any features not listed that you think would be nice please post them here. We will of course consider them.

ASP Photo Gallery Version 4

------------------------------------------------------------ --------------------------------------------

Finished Improvements:

new setup page makes setting up the data connection easier than ever
it attempts to determine the possible data paths and makes suggestions for what to try
when you finally get the data connection working it gives you a link to the admin area of the application
so you can get started using the application

all database table names can be specified in the config_inc.asp file for advanced users that they may need
to change the table names in the database.. helpful for sql installation where one sql database must be
shared by many applications

new data folder is the only folder that needs permissions set
before multiple folders needed permissions
now everything can be put in this folder... database,logfiles,configuration files,picture upload folders...
eventually all cjwsoft applications will do this allowing multiple cjwsoft applications to use that same folder
therefore making it easier than ever to setup more applications without asking your host to set more permissions

new text based config file makes it easier to add new options to the program without making changes to
the database structure... therefore the need for the configuration table in the database has been eliminated
this also reduces system resources needed to load the config data for each page because it eliminates calls to the
database for config data

added voice effects for data connection page, intro users page, and settings page

made it so ratings color was an option (red or blue)

fixed minor bug that wasn't showing fixed category heights when that was selected and am image wasn't originally sized that way during initial upload

changed logfiles dates so they always show up in the proper order 09 vs 9

added config option to change bit query value to 1 or -1
default it to 1.... this is a technical thing

added the extra options currently in the config file to the settings page so people do not have to manually edit that
file any longer...

added new persits email option and authentication options to the settings page

added new CDOSYS emailing option

added support for dundas emailer

added support for ASPSMARTMAIL

fixed word filter so if it is empty it doesn't mess up
also make editing it part of the main settings

made email functions include file and edited all page that email to use it

added css/style sheet support and removed a lot of the old font tags

seperated the settings page into sections because it was too big and confusing

added ability for text watermarking when using the ASPImage component

made the picture upload error message no longer mention browsers that do not support picture uploading
as that is confusing people... and the problem is never that anymore

Made the ASPImage test page delete the bar graph before creating it so if it is already there they will
not think it is working

added crystal ball feature to admin users screen... shows additional user info when you hold the mouse over it

Made search function highlight search word in results.
Made the search function search the image description text files as well

Eliminated the guestbook directory as there was no need for the guestbook to be in it's own directory. This also simplified the menu.asp file as the guestbook section could be removed.

------------------------------------------------------------ --------------------------------------------

Possible Improvements:

eventually make new and much better directions/documentation... html based for multiple reasons

Eliminate the need for parent paths to be enabled on the web server.
(THIS MAY NOT BE POSSIBLE)
Many hosting companies disabled parent paths and will not enable them for their users.
On Windows 2003 Server Parent Paths are disabled by default.

make it so users ability to upload pics can be optionally disabled

possibly make some of the special functions in the extras folder built in to the admin area

Make the category picture uploader smarter because of the jpg gif issue when reuploading cat icons
A jpg loaded over a gif.. doesn't delete the old gif graphic and vice versa

Reduce number of ".asp" pages in general.

Use more functions for redundant tasks.

Optimize all instances of the old filefound function which is using more resources than are necessary

option.explicit the entire application and get all the variables dimmed once and for all

possibly incorporate the new category system I am working on which allows for unlimited categories and levels
also simplifies the heck out of the pages that call the categories

possibly add some cool image manipulation functions such as rotation for the various image components supported

possibly add the ability to move pictures around in an album. and maybe between albums
I must also remember to move the ratings and desc as well for that image.

possibly add the ability to make individual pictures require approval

possibly add the streaming image ability (asp page called from image tag) I came up with as an option for
people that can use it. this will better secure images in password protected albums and also possibly make
it so images can only be viewed from certain urls.. and maybe make an interface for a list of allowed urls

improve the .net support to also resize the larger images.. currently it does not

possibly add a feature to store 3 versions of images uploaded
thumbnail, medium res, and high res/original
this will appeal to professionals or people that may want to sell prints
storing a large version will be optional

possible support for multimedia content other than gif and jpg images

fix... url to link to..   problem on control pics page when both a jpg and a gif are present... which also relates to a another slight
bug that needs to be taken care of

make interface in admin to listen to installed midi files
and also to upload / delete them

possibly make per album guestbook... or call it something else like disussion or comments

add option to store the images orginal name in the images description area during upload
may be helpful to people that name their images in a somewhat descriptive way

change approval settings so they work on a per user basis
eliminate access levels from edit user screen and get rid of the level 4 stuff mentioned
possibly add a per user option for individual pic approval as well if I get that feature implemented

add support for the ibulc bulk upload client that I recently discovered
it is very cool

Hello:

When using the Mass Mail feature and selecting the Users to ‘Active’ and the Access Level I want to send to the system will still send e-mails to the ‘Inactive’ users from the same Access Level.

In other words it sends to everyone in the Access Level regardless if you choose “Active” only.

Any ideas to correct?

Thanks,

-Ricardo

really all depends on the sql connection string you are using and the names of your sql user you are using...

you really havent described very much..

I'd double check all of it.. something is wrong

IMPORTANT UPDATE - READ THIS
http://support.cjwsoft.com/forum/forum_posts.asp?TID=205& ;PN=1


The IPN Subscription Pack which is built in to ASPProtect 7 contains all the pre-built scripts you need to implement PayPal IPN Subscriptions with ASPProtect. IPN stands for (Instant Payment Notification). It allows you to set up scripts on your server so whenever a PayPal payment is processed the PayPal server sends info to your server regarding the transaction and vice versa. This is a fully automated process and allows you to charge users for access by the month or however long you like.

The Subscription feature of PayPal handles recurring billing automatically. The PayPal server will communicate with the ASPProtect system and keep everything up to date with users and their subscriptions.

This Support Pack basically gives you an additional signup and registration directory "paypal_sub_signup" and it should not interfere with any changes or customizations you have made to your ASPProtect setup. New users can register in this directory and sign up for a subscription at the same time. Existing users whether active or expired can be sent to this directory where they can lookup their account and start a subscription. You can also assign various Access and Group Levels during signup and you can set up various prices for various amounts of time as well. This is a real-time setup for the most part. As soon as a user pays via PayPal your system is updated and they will have access.

To use this all you need to do in ASPProtect 7 is enter your PayPal account name into the settings screen. It will be an email address. You'll need a business or premier account with PayPal and you will need log into your PayPal account and turn on IPN in you profile. They make you enter a default IPN URL. We do not use that so if you already have something there leave it there. If you dont have something there you can type in any the full url to any page on your server. It's probably best to send it to an empty ".asp" page or something.

Changing Payment Options

In the "paypal1.asp" file there are some sample payment options set up.

They look like this and you can have as many as you like.

<!-- Begin Payment Option Code -->
<form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_blank">

<% Label = "Membership (1 Month) $9.99 Recurring" %>
<!-- Begin Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->
<input type="hidden" name="no_shipping" value="1">
<input type="hidden" name="no_note" value="1">
<input type="hidden" name="a3" value="9.99">
<input type="hidden" name="p3" value="1">
<input type="hidden" name="t3" value="M">
<input type="hidden" name="src" value="1">
<input type="hidden" name="sra" value="1">
<!-- Field Below must have 2 commas First two values are optional (access level,groups,user ID)-->
<input type="hidden" name="custom" value=",,<% =User_ID %>">
<!-- End Form Fields You Can Edit.. See PayPal Subscription Manual For Details -->

<!--#INCLUDE FILE="form_data_inc.asp"-->
<input type="image" src="https://www.paypal.com/images/x-click-but20.gif" border="0" name="submit" alt="Make payments with PayPal - it's fast, free and secure!">

</form>
<hr>
<!-- End Payment Option Code -->
 

To really understand what these form values mean it is best to look through the PayPal Subscriptions Manual which is a PDF file you can get from the PayPal Site.

This link was valid the last I checked...
Subscriptions and Recurring Payments Manual

It also may be helpful to use their wizard to create some subscription buttons with different settings and then look at the code generated.

Bascially these are the important ones..

a3 - amount to billed each recurrence t3 - time period (D=days, W=weeks, M=months, Y=years) p3 - number of time periods between each recurrence

The custom field is something we are using to send info from ASPProtect to PayPal.
it allows you to set the access_level or groups access (groups support require the ASPProtect Option Pack)

<input type="hidden" name="custom" value=",,<% =User_ID %>">

or this example where we are setting the access_level to (2) and also giving the user access to groups (3 and 4)

<input type="hidden" name="custom" value="2,*3*4*,<% =User_ID %>">

Here is how it works.
The value setting (red) is essentially and array that can be made up 3 elements separated by comma's

access_level,groups,User_ID

If you do not want to set the access_level or groups access.. then you don't even need to edit the setting.

Values must be separated by a comma even if there is no value and there can be no spaces.  If you didn't want to set an access level or groups there would still be 2 commas at the beginning.  etc etc
Basically there must always be 2 commas but you only have to set last values which is the User_ID from the ASPProtect system.

The 1st value is the access level you want to user assigned to.
The 2nd option is the groups you want the user assigned to. (requires option pack)
The 3rd option is the User_ID which the system takes care of. Do not edit this option. Leave it as <% =User_ID %>
 

Look in the "check_user_inc.asp" file..

You'll see the name of the cookie there and also get an idea how to access it.

In most versions it looks like this.

Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")

You'll want the cookie for the username because the session variable will not exist unless they have actually gone to a protected page during that session at the site.

It would probably be best the check for both the session and the cookie. That will make sure people logged in that arent using the cookie option still see the message you want to display.

Sorta like this..

GetUsername = ""
If Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME") <> "" Then
GetUsername = Request.Cookies("PASWORDSYSTEMCOOKIE")("COOKIE_USERNAME")
Else If Session("Username") <> "" Then
GetUsername = Session("Username")
End If

Response.Write GetUsername

Banners no longer show up on my site ?

If banners were working fine and now they are just not showing up.
1st check to see that you are calling a valid zone with live banners in it.
If you are then most likely this it what hapened.

The web server must have crashed or lost power and now the application variables are in limbo/not working.

I have seen this happen a few times.

Basically the application variable system gets messed up because it was not shut down properlly.

The way to cure it are as follows.

Edit and save a banner in the system. Hopefully that gets things going again.

(User Photo Upload Mod) for ASPProtect Version 7.x

This will allow an individual user to upload a user picture instead of just the admin.

Notes: This is a down and dirty mod. The user upload code was copied from the admin area and there are no safeguards. Meaning there is no limit on the file size a user uploads and there is no confirmation process in case something they upload is inappropriate. etc etc etc

If you want that you will have to work on that on your own.

Directions:
Back up your existing ASPProtect installation.

copy these files into your "users" folder

2006-01-24_111305_User_Upload_Mod.zip

That did the trick. Once again a quick very helpfull reply.

Thanks.

I purchased 6.0 in Feb 05.  Is there an upgrade price to 7.0

I spent considerable time setting up 6.0 to work with my web site. From what I read in the forum, it sounds like I have to start over again to integrate the new version into our web site. I do not relish the thought of that, but I have to move to an email system with a valid MX record.

Will I be starting over from scratch with this upgrade?

It's not normal at all. My guess you accidently edited the code in a bad way.

(thats the same code the every guestbook in every application I sell uses including ASPGuest which gets downloaded for free about 50 times a day)

No one has ever said it acted funny.

I would do a default installation with the original code somewhere and see if the problem occurs. If it does I can take a look.

In the meantime I wouldn't be running that as it is probably using up massive processor time because of whatever is wrong with it. 

this issue has been resolved.. see following thread

http://support.cjwsoft.com/code/moreinfo316-1.htm

thanks!! the file took care of the extra slash. I also fixed the problem by modifying the permissions.

dazed

I just took a look and that is definetly what happened.
It has nothing to do with the registration process as far as I can see.

Just running this page triggers it and I know it does not do that the way it comes.
http://www.myvirtualtutor.com/aspprotect/users/user_area.asp

Please back up what you changed and put the user area back the way it came..

If error still happens then I can help you.. It it works fine with the default files from the zip archive then you messed something up in the code.

You have to be really careful when working with ASP code.

Also: just in case you did this. " you should not be password protecting any files in the users area that are already there " the users area does it's own thing and there is no reason to be doing anything like that to the files that are already there. You can do whatever you like to files you add on your own.

Hi

ASPBanner is great...

I have a little problem I have a ASP site http://www.bythebeach.com.au/

I understand how Zones (location on a pages) works but i need only to display those banners that pertain only to that catorgries or sub catorgries.

How would i do that would ....  Would i have to add a new field in the database...?

Any help would be greatly apprecaited

regards

Domenic

Sydney, Australia

Ok i am having an issue with my other comp. I have spent ANOTHER 3 hours researching this one.... it WONT START THE IIS SERVICE!!!

I get this error:

The service did not respond to the start or control request in a timely fashion

ANYWAY---

I decided to use one of my client's hosts; which happens to be Network Solutions.

ANYWAY again-

I uploaded the whole thing there and they advised me they cannot do the explicit permissions on that _database folder. This is what they said: I would also would like to point out that ASP.NET applications and permissions do not extend to any other folder, other than the root, (/htdocs/), and the bin, (/htdocs/bin/) folders.  Sub-directories and folder after bin and htdocs will not have ASP.NET permission (read or write).

If you could move or reconfigure your application to save all your code behind, include and dll files onto the root or bin folder, your application could work or possibly run as you would expect.  Please have this done and retest your application. If and when you get a different problem or another error after doing so, please let us know, and we shall be happy to help you troubleshoot any problems that you may have.

There is a 'create database option'  where i can create a database..create a dsnname, user name, password and have to specify the database file name. Once i do this i need to place the database file (aspprotectnet2002.mdb) in the /db folder within the root. I also tried this and made the appropriate change in the web.config but it STILL DOES NOT WORK. I AM PULLING MY HAIROUT WHY WONT ANYTHING WORK.

ALL THE FILES ON ON THE ROOT OF THE WEB HOST. I PULLED THE FILES OUT OF THE _DATABASE FOLDER AND DUMPED THEM ON THE ROOT. I CHANGED THAT ON THE WEB.CONFIG BUT ITS STILL LOOKING FOR SOME .XML FILE IN THAT _DATABASE FOLDER.

I'VE BEEN TRYING EVERYTHING AND IT SEEMS THAT I CANT USE THIS SOFTWARE FOR THE LIFE OF ME

Yes, that was it! I had not created the banner for that zone yet. Once I did it came up fine. Do I win the Bonehead of the Year award?

I am just implementing the product, and I deleted the included zones instead of renaming them. That is why it is up to 6. I am migrating banners from my current system before I implement the code onto my pages.

If I may, I'd like to ask another question. I use rotation on all pages of my site except for the home page, where the banners are all smaller and static - an advertiser can expect their banner to always be in the same spot on the page.

I am currently hard coding this via html, but then I do not have the ability to collect stats on home page banner clicks, so I want to use ASPBanner. My question is, can I do this without creating a seperate zone for each banner? In other words, is there a way to modify the html code (that works just fine) so that in addition to indicating the zone, it can indicate the specific banner I want to appear? I would then paste the code in each cell of the table, and alter the banner #. If I do this with just the zone, I expect that the page will randomize the position of each banner across the page. You can see what I'm talking about by clicking here: http://www.PoconoCommuter.com/

Thanks for your help!

ok, 1st we need to rule out the #1 reason people sometimes think that is not working.

Is is set up never to allow the same IP to increment the count more than once in a row so when testing it is real easy to think the count isn't working because unless you can change your ip you can not increment the count more than once per album

It's a poor mans spam abuse type of deal..
For the most part it will keep some Joker from hitting refresh 100 times and inflating the count of an album.

Do you think that is possible what is happening ?

Also, here is an older thread about the same issue?
http://support.cjwsoft.com/code/moreinfo54-2.htm

I post new ads ,  can view it in  admin area 

but  when  go to first page  no ads show  

all categories show   (0)  

How solve this problem ?

PS: I set default auto approved ads

That carrot doesn't really exist in the file, so I'm not sure.

I did download and place the ASPTEST file in www.drsweisberg.com/asptest and when I try to load the 2 pages it fails to load.  I have another site on the same server and I uploaded the same exact set of files and the asp pages load.  www.klarman.com/asptest

http://www.drsweisberg.com/asptest/server_info.asp

http://www.klarman.com/asptest/server_info.asp

This is how I set the connection:

ConnectionString = "DBQ=D:\clients\rklarman\klarman\asptest\_database\asptest.m db;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

ConnectionString = "DBQ=D:\clients\rklarman\drsweisberg\asptest\_database\aspte st.mdb;Driver={Microsoft Access Driver (*.mdb)};UID=Admin;Password=temp"

I am not sure totally understand your question.
I need you to explain it differently.

Any ".asp" page that is protected is going to automatically prompt them for a login box or log them in automatically depending on if they set that option.. In the end returning them to that same page.

So, it really all takes care of itself for the most part.. It doesn't even matter if the bookmark a protected page deep in your site. The system is smart enough to keep them at that page as well as handle their access.

Now of course if they are at an unprotected page of your site and navigate to a protected page they get a loin prompt or are allowed in if they already logged in...

Also.. when you say unprotected page ? do you mean ".htm" or ".asp"

sometimes those emails take a bit... all depend on wht you are using to send them and whether a pickup directory is involved

as for the other I do not know.. PM me the site details I can look

if it is a 2003 server parent paths must of course be enabled.. its a requirement of aspclassifieds

[QUOTE=cwilliams]Humm, Did you make any changes to the code ?
Solid Black is not the default so it must have changed at least once.[/quote]

I did change the top_logo.gif and the associated link. That was on the default page not the Solid Black skin which is unchanged. After downloading/uploading the skins I tried changing it to one of the Beach skins and that's when it changed to Solid Black and has been stuck there ever since.

[quote]Otherwise it might be some sort of application variable problem.
I would make sure the web is and "application" in the IIS console.[/quote]I don't have access to the Microsoft IIS console as this is a host site. I can access the site's "control panel" but it does allow for those type of settings. Mostly just permissions, DSN entries, etc.

Thanks.
Al

Hi,

Sorry, but if  ".asp" pages download instead of run on a server then that means ASP is not working on the server and is not configured correctly. That is about as low level as it gets and it is really the hosting companie's responsibilty to sort that one out.

It is totally a system admininister's job to make sure that sort of thing is working. If this place supports ASP they really need to fix that for you. There really is nothing  I can do for you until ".asp" pages at least run.

As for the Free install... that is no problem. Of course you need to get the hosting company to fix the web before I can be of any help. There is more to that problem then permissions.

For starters I would make a simple ".asp" page with hardly anything it (even some simple html text is fine) and ask them why it is downloading instead of executing and to please fix things.

It turns out that I never enabled ASP.net on the site. After doing that the skins work much better. I'll have to poke around and see what other functionality is now available.

Thanks!

Al

I did a google search and it turns out that error very well might have to do with ASP trying to send an email and that process failing.

That tells me your emailing from the application is not working so it is probably not something you edited incorrectly.

see this article...

80040211
http://www.aspfaq.com/show.asp?id=2026

Emailing was working as when I did your installation (I think I did it months ago, didn't I) so it must be some incorrect changes to your email settings in the admin settings screen. Try sending an individual email to a user from the admin users screen and see if it works. My guess is you will get the same error and means your email sending options are no longer correct or valid.

If that is the case I would ask you if you changed them or possibly something changed as far as your email setup goes. Passwords ? EMail Server .. etc etc etc

Has any one used the aspmail function to send emails from within your site? If so what did you use as the AspMail_Host string in the connections database?

thank you